Graphical Abstract Figure
Abstract
Surfaces of air foil thrust and journal bearings in high-speed turbomachinery are coated to improve their operational integrity, particularly when the aerodynamic load-carrying capacity is reduced during instances of startup and shutdown. Surface coatings, as protective barriers in air foil bearings, can mitigate the adverse effects of direct surface interactions on such occasions. This article provides an in-depth review of the body of important research conducted for the study of coated air foil thrust and journal bearings, highlighting the state of the art in coating technology. The review features the role of composite coatings, designed to provide favorable thermal, mechanical, and frictional characteristics. This article also highlights the trends in the selection of coatings for air foil bearings, pertinent to desired thermo-mechanical performance.
References
1.
Samanta
, P.
, Murmu
, N. C.
, and Khonsari
, M. M.
, 2019
, “The Evolution of Foil Bearing Technology
,” Tribol. Int.
, 135
, pp. 305
–323
. 2.
Hou
, Y.
, Zhao
, Q.
, Guo
, Y.
, Ren
, X.
, Lai
, T.
, and Chen
, S.
, 2021
, “Application of Gas Foil Bearings in China
,” Appl. Sci.
, 11
(13
), p. 6210
. 3.
Kumar
, J.
, Khamari
, D. S.
, Behera
, S. K.
, and Sahoo
, R. K.
, 2022
, “A Review of Thermohydrodynamic Aspects of Gas Foil Bearings
,” Proc. IMechE, Part J: J. Eng. Tribol.
, 236
(7
), pp. 1466
–1490
. 4.
Branagan
, M.
, Griffin
, D.
, Goyne
, C.
, and Untaroiu
, A.
, 2015
, “Compliant Gas Foil Bearings and Analysis Tools
,” ASME. J. Eng. Gas Turbines Power
, 138
(5
), p. 054001
. 5.
Zywica
, G.
, Baginski
, P.
, and Banaszek
, S.
, 2016
, “Experimental Studies on Foil Bearing With a Sliding Coating Made of Synthetic Material
,” ASME J. Tribol.
, 138
(1
), p. 011301
. 6.
Bhushan
, B.
, 1980
, “High Temperature Self-Lubricating Coatings for Air-Lubricated Foil Bearings for the Automotive Gas-Turbine Engine,” NASA, Report No. NASA-CR-159848.7.
Bhushan
, B.
, Ruscitto
, D.
, and Gray
, S.
, 1978
, “Hydrodynamic Air Lubricated Compliant Surface Bearing for an Automotive Gas Turbine Engine. 2: Materials and Coatings,” NASA, Report No. NASA-CR-135402.8.
Jahanmir
, S.
, Heshmat
, H.
, and Heshmat
, C.
, 2009
, “Evaluation of DLC Coatings for High-Temperature Foil Bearing Applications
,” ASME J. Tribol.
, 131
(1
), p. 011301
. 9.
Jahanmir
, S.
, Heshmat
, H.
, and Heshmat
, C.
, 2009
, “Assessment of Tribological Coatings for Foil Bearing Applications
,” Tribol. Trans.
, 52
(2
), pp. 231
–242
. 10.
Fanning
, C. E.
, and Blanchet
, T. A.
, 2008
, “High-Temperature Evaluation of Solid Lubricant Coatings in a Foil Thrust Bearing
,” Wear
, 265
(7–8
), pp. 1076
–1086
. 11.
Heshmat
, H.
, Walowit
, J. A.
, and Pinkus
, O.
, 1983
, “Analysis of Gas Lubricated Foil Journal Bearings
,” ASME J. Lubr. Tribol.
, 105
(4
), pp. 647
–655
. 12.
Su
, H.
, Rahmani
, R.
, and Rahnejat
, H.
, 2016
, “Thermohydrodynamics of Bidirectional Groove Dry Gas Seals With Slip Flow
,” Int. J. Therm. Sci.
, 110
, pp. 270
–284
. 13.
Shahdhaar
, M. A.
, Sandeep
, S. Y.
, Debanshu
, S. K.
, and Suraj
, K. B.
, 2020
, Numerical Investigation of Slip Flow Phenomenon on Performance Characteristics of Gas Foil Journal Bearing
, SN Appl. Sci.
, 2, pp. 1
–18
. 14.
Lee
, N. S.
, Choi
, D. H.
, Lee
, Y. B.
, Kim
, T. H.
, and Kim
, C. H.
, 2002
, “The Influence of the Slip Flow on Steady-State Load Capacity, Stiffness and Damping Coefficients of Elastically Supported Gas Foil Bearings
,” Tribol. Trans.
, 45
(4
), pp. 478
–484
. 15.
Gohar
, R.
, and Rahnejat
, H.
, 2018
, Fundamentals of Tribology
, 3rd ed., World Scientific
, London
.16.
Lehn
, A.
, 2017
, “Air Foil Thrust Bearings: A Thermo-Elasto-Hydrodynamic Analysis,” PhD Thesis, Technische Universität Darmstadt.17.
Salehi
, M.
, Swanson
, E.
, and Heshmat
, H.
, 2001
, “Thermal Features of Compliant Foil Bearings—Theory and Experiments
,” ASME J. Tribol.
, 123
(3
), pp. 566
–571
. 18.
Tian
, X.
, and Kennedy
, F. E.
, 1993
, “Temperature Rise at the Sliding Contact Interface for a Coated Semi-Infinite Body
,” ASME J. Tribol.
, 115
(1
), pp. 1
–9
. 19.
Kennedy
, F. E.
, and Tian
, X.
, 2016
, “Modeling Sliding Contact Temperatures, Including Effects of Surface Roughness and Convection
,” ASME J. Tribol.
, 138
(4
), p. 042101
. 20.
Licht
, L.
, 1978
, “Foil Bearings for Axial and Radial Support of High Speed Rotors: Design, Development, and Determination of Operating Characteristics,” NASA, Report No. NASA-CR-2940.21.
LaTray
, N.
, and Kim
, D.
, 2020
, “Design of Novel Gas Foil Thrust Bearings and Test Validation in a High-Speed Test rig
,” ASME J. Tribol.
, 142
(7
), p. 071803
. 22.
Zheng
, Y.
, Chen
, S.
, Lai
, T.
, Zhang
, X.
, and Hou
, Y.
, 2016
, “Numerical and Experimental Study on the Dynamic Characteristics of the Foil Journal Bearing With Double-Layer Protuberant Support
,” J. Adv. Mech Des., Syst., Manuf.
, 10
(2
), pp. 1
–12
. 23.
Zhou
, Q.
, Hou
, Y.
, and Chen
, R. G.
, 2012
, “Development of Foil Thrust Bearings With Simple Structure for Micro Turbines
,” Adv. Mater. Res.
, 368
, pp. 1392
–1395
. 24.
Dykas
, B.
, Bruckner
, R.
, DellaCorte
, C.
, Edmonds
, B.
, and Prahl
, J.
, 2008
, “Design, Fabrication, and Performance of Foil Gas Thrust Bearings for Microturbomachinery Applications
,” ASME. J. Eng. Gas Turbines Power
, 131
(1
), p. 012301
. 25.
Supreeth
, S.
, Ravikumar
, R. N.
, Raju
, T. N.
, and Dharshan
, K.
, 2022
, “Foil Stiffness Optimization of a Gas Lubricated Thrust Foil Bearing in Enhancing Load Carrying Capability
,” Mater. Today
, 52
, pp. 1479
–1487
. 26.
Bruckner
, R. J.
, 2004
, “Simulation and Modeling of the Hydrodynamic, Thermal, and Structural Behavior of Foil Thrust Bearings
,” Ph.D. dissertation
, Case Western Reserve University
, Cleveland, Ohio
.27.
Lee
, D.
, and Kim
, D.
, 2011
, “Three-Dimensional Thermohydrodynamic Analyses of Rayleigh Step Air Foil Thrust Bearing With Radially Arranged Bump Foils
,” Tribol. Trans.
, 54
(3
), pp. 432
–448
. 28.
Somaya
, K.
, Yoshimoto
, S.
, and Miyatake
, M.
, 2009
, “Load Capacity of Aerodynamic Foil Thrust Bearings Supported by Viscoelastic Material
,” Proc. IMechE, Part J: J. Eng. Tribol.
, 223
(4
), pp. 645
–652
. 29.
Xu
, F.
, Dong
, Z.
, Chu
, J.
, Wang
, H.
, and Wang
, Y.
, 2022
, “Experimental Analysis of Influence of Double-Layer Bump Foils on Aerodynamic Thrust Foil Bearings Performance
,” Ind. Lubr. Tribol.
, 74
(1
), pp. 127
–133
. 30.
Tian
, X.
, and Kennedy
, F.
, 1994
, “Maximum and Average Flash Temperatures in Sliding Contacts
,” ASME J. Tribol.
, 116
(1
), pp. 167
–174
. 31.
Dykas
, B. D.
, and Tellier
, D. W.
, 2008
, “A Foil Thrust Bearing Test Rig for Evaluation of High Temperature Performance and Durability,” Army Research Laboratory, Report No. ARL-MR-0692.32.
Holmberg
, K.
, and Matthews
, A.
, 2009
, Coatings Tribology: Properties, Mechanisms, Techniques and Applications in Surface Engineering Tribology and Interface Engineering Series
, Elsevier
, Oxford, UK
.33.
Bull
, S. J.
, and Jones
, A. A.
, 1996
, “Multilayer Coatings for Improved Performance
,” Surf. Coat. Technol.
, 78
(1–3
), pp. 173
–184
. 34.
Teodorescu
, M.
, Rahnejat
, H.
, Gohar
, R.
, and Dowson
, D.
, 2009
, “Harmonic Decomposition Analysis of Contact Mechanics of Bonded Layered Elastic Solids
,” Appl. Math. Model.
, 33
(1
), pp. 467
–485
. 35.
Bhushan
, B.
, and Gray
, S.
, 1980
, “Development of Surface Coatings for Air-Lubricated Compliant Journal Bearings to 650 °C
,” ASLE Trans.
, 23
(2
), pp. 185
–196
. 36.
Greenwood
, J. A.
, and Williamson
, J. B.
, 1966
, “Contact of Nominally Flat Surfaces
,” Proc. R. Soc., A
, 295
, pp. 300
–319
.37.
Archard
, J. F.
, and Hirst
, W.
, 1956
, “The Wear of Metals Under Unlubricated Conditions
,” Proc. R. Soc. A
, 236
(1206
), pp. 397
–410
.38.
Hornbogen
, E.
, 1975
, “The Role of Fracture Toughness in the Wear of Metals
,” Wear
, 33
(2
), pp. 251
–259
. 39.
Bhushan
, B.
, and Gupta
, B. K.
, 1991
, Handbook of Tribology: Materials, Coatings, and Surface Treatments
, McGraw Hill
, New York, NY
.40.
41.
Matthews
, A.
, Franklin
, S.
, and Holmberg
, K.
, 2007
, “Tribological Coatings: Contact Mechanisms and Selection
,” J. Phys., D: Appl. Phys.
, 40
(18
), p. 5463
–5475
. 42.
Erdemir
, A.
, and Hochman
, R. F.
, 1988
, “Surface Metallurgical and Tribological Characteristics of TiN-Coated Bearing Steels
,” Surf. Coat. Technol.
, 36
(3–4
), pp. 755
–763
. 43.
Johnson
, K. L.
, 1985
, Contact Mechanics
, Cambridge University Press
, Cambridge, UK
.44.
Johns-Rahnejat
, P. M.
, and Gohar
, R.
, 1997
, “Point Contact Elastohydrodynamic Pressure Distribution and Sub-Surface Stress Field
,” Tri-Annual Conference on Multi-Body Dynamics: Monitoring and Simulation Techniques
, Bradford, UK
, March 21
, pp. 161
–172
.45.
Johns-Rahnejat
, P. M.
, Dolatabadi
, N.
, and Rahnejat
, H.
, 2020
, “Analytical Elastostatic Contact Mechanics of Highly-Loaded Contacts of Varying Conformity
,” Lubricants
, 8
(9
), p. 89
. 46.
Johns-Rahnejat
, P. M.
, Dolatabadi
, N.
, and Rahnejat
, H.
, 2024
, “Elastic and Elastoplastic Contact Mechanics of Concentrated Coated Contacts
,” Lubricants
, 12
(5
), p. 162
. 47.
Lei
, J. F.
, Martin
, L. C.
, and Will
, H. A.
, 1997
, “Advances in Thin Film Sensor Technologies for Engine Applications
,” ASME 1997 International Gas Turbine and Aeroengine Congress and Exhibition
, Florida, USA
, June 2–5, 1997
, Paper No. V004T15A036.48.
DellaCorte
, C.
, Zaldana
, A. R.
, and Radil
, K. C.
, 2004
, “A Systems Approach to the Solid Lubrication of Foil Air Bearings for Oil-Free Turbomachinery
,” ASME J. Tribol.
, 126
(1
), pp. 200
–207
. 49.
Wagner
, R. C.
, 1985
, “Experimental Test Program for Evaluation of Solid Lubricant Coating as Applied to Compliant Foil Gas Bearings to 315 deg C,” NASA, Report No. NASA-CR-174837.50.
Heshmat
, H.
, Jahanmir
, S.
, and Walton
, J. F.
, 2007
, “Coatings for High Temperature Foil Bearings
,” ASME Turbo Expo: Power for Land, Sea, and Air
, Montreal, Canada
, May 14–17
, vol. 47942, pp. 971
–976
.51.
Lubell
, D.
, DellaCorte
, C.
, and Stanford
, M.
, 2006
, “Test Evolution and Oil-Free Engine Experience of a High Temperature Foil Air Bearing Coating
,” ASME Conf. on Turbo Expo: Power for Land, Sea, and Air
, Paper No. GT2006-90572.52.
Kaur
, R. G.
, and Heshmat
, H. H.
, 2001
, “Testing of Coatings for Use in Compliant Foil Bearings
,” STLE/ASME Joint Conf.
, Orlando, FL
, Oct. 2001
.53.
Bhushan
, B.
, 1981
, “Friction and Wear Results From Sputter-Deposited Chrome Oxide With and Without Nichrome Metallic Binders and Interlayers
,” ASME J. Lubr. Tech.
, 103
(2
), pp. 218
–227
. 54.
DellaCorte
, C.
, 2012
, “Oil-Free Shaft Support System Rotor Dynamics: Past, Present and Future Challenges and Opportunities
,” Mech. Syst. Signal Process
, 29
, pp. 67
–76
. 55.
Żywica
, G.
, Bagiński
, P.
, Roemer
, J.
, Zdziebko
, P.
, Martowicz
, A.
, and Kaczmarczyk
, T. Z.
, 2022
, “Experimental Characterization of a Foil Journal Bearing Structure With an Anti-Friction Polymer Coating
,” Coatings
, 12
(9
), p. 1252
. 56.
Bagiński
, P.
, and Żywica
, G.
, 2022
, “Experimental Study of Various Low-Friction Coatings for High-Temperature Gas Foil Bearings Under Cold-Start Conditions
,” ASME J. Eng. Gas Turbines Power
, 144
(8
), p. 081007
. 57.
Heshmat
, H.
, Hryniewicz
, P.
, Walton Ii
, J. F.
, Willis
, J. P.
, Jahanmir
, S.
, and DellaCorte
, C.
, 2005
, “Low-Friction Wear-Resistant Coatings for High-Temperature Foil Bearings
,” Tribol. Int.
, 38
(11–12
), pp. 1059
–1075
. 58.
Bhushan
, B.
, and Gray
, S.
, 1978
, “Static Evaluation of Surface Coatings for Compliant Gas Bearings in an Oxidizing Atmosphere to 650 °C
,” Thin Solid Films
, 53
(3
), pp. 313
–331
. 59.
Bhushan
, B.
, 1979
, “Development of RF-Sputtered Chrome Oxide Coatings for Wear Application
,” Thin Solid Films
, 64
(2
), pp. 231
–241
. 60.
Bhushan
, B.
, 1980
, “Characterization of RF Sputter-Deposited Chrome Oxide Films
,” Thin Solid Films
, 73
(2
), pp. 255
–265
. 61.
Bhushan
, B.
, 1982
, “Development of CdO-Graphite-Ag Coatings for Gas Bearings to 427 °C
,” Wear
, 75
(2
), pp. 333
–356
. 62.
San Andrés
, L.
, and Jung
, W.
, 2018
, “Evaluation of Coated Top Foil Bearings: Dry Friction, Drag Torque, and Dynamic Force Coefficients
,” ASME Turbo Expo: Power for Land, Sea, and Air
, June 2018
, Paper No. V07BT34A018.63.
Bhushan
, B.
, 1981
, “Structural and Compositional Characterization of RF Sputter-Deposited Cr2O3+NiCr Films
,” ASME J. Lubr. Technol.
, 103
(2
), pp. 211
–217
. 64.
Benoy
, P. A.
, and Williams
, S.
, 2002
, “Investigation of Thermal Processing on the Properties of PS304: A Solid Lubricant Coating,” Glenn Research Center Research, Report No. 20992.65.
DellaCorte
, C.
, and Edmonds
, B. J.
, 2009
, “A New Temperature Solid Lubricant Coating for High Temperature Wear Applications,” NASA, Report No. NASA/TM-2009-215678.66.
Stanford
, M. K.
, and DellaCorte
, C.
, 2004
, “Friction and Wear Characteristics of Cu-4Al Foil Bearing Coating at 25 and 650 °C,” NASA, Report No. NASA/TM-2004-212972.67.
Kim
, T. H.
, Park
, M.
, and Lee
, T. W.
, 2017
, “Design Optimization of Gas Foil Thrust Bearings for Maximum Load Capacity
,” ASME J. Tribol.
, 139
(3
), p. 031705
. 68.
Balducchi
, F.
, Arghir
, M.
, Gauthier
, R.
, and Renard
, E.
, 2013
, “Experimental Analysis of the Start-Up Torque of a Mildly Loaded Foil Thrust Bearing
,” ASME J. Tribol.
, 135
(3
), p. 031702
. 69.
Walker
, M.
, Kruizenga
, A. M.
, Pasch
, J. J.
, and Fleming
, D.
, 2017
, “Foil Bearing Coating Behavior in CO2,” Sandia National Lab Research, Report No. SAND-2017-8280R.70.
Lee
, Y. B.
, Kim
, C. H.
, Kong
, H.
, Han
, H. G.
, Lee
, J. K.
, Jo
, J. H.
, and Lee
, B. S.
, 2009
, “Coating Material Having Heat and Abrasion Resistance and Low Friction Characteristics,” U.S. Patent No. 7,615,291.71.
Humphrey
, E.
, Morris
, N. J.
, Rahmani
, R.
, and Rahnejat
, H.
, 2020
, “Multiscale Boundary Frictional Performance of Diamond Like Carbon Coatings
,” Tribol. Int.
, 149
, p. 105539
. 72.
Fellenstein
, J. A.
, DellaCorte
, C.
, Moore
, K. D.
, and Boyes
, E.
, 1997
, “High Temperature Brush Seal Tuft Testing of Selected Nickel-Chrome and Cobalt-Chrome Superalloys
,” 33rd Joint Propulsion Conference and Exhibit
, No. E-10796: 2634.73.
Blanchet
, T. A.
, Kim
, J. H.
, Calabrese
, S. J.
, and Dellacorte
, C.
, 2002
, “Thrust-Washer Evaluation of Self-Lubricating PS304 Composite Coatings in High Temperature Sliding Contact
,” Tribol. Trans.
, 45
(4
), pp. 491
–498
. 74.
Radil
, K. C.
, and DellaCorte
, C.
, 2002
, “The Effect of Journal Roughness and Foil Coatings on the Performance of Heavily Loaded Foil Air Bearings
,” Tribol. Trans.
, 45
(2
), pp. 199
–204
. 75.
Martowicz
, A.
, Roemer
, J.
, Kantor
, S.
, Zdziebko
, P.
, Żywica
, G.
, and Bagiński
, P.
, 2021
, “Gas Foil Bearing Technology Enhanced With Smart Materials
,” Appl. Sci.
, 11
(6
), p. 2757
. 76.
DellaCorte
, C.
, 2000
, “The Evaluation of a Modified Chrome Oxide Based High Temperature Solid Lubricant Coating for Foil Gas Bearings
,” Tribol. Trans.
, 43
(2
), pp. 257
–262
. 77.
Suriano
, F. J.
, 1981
, “Gas Foil Bearing Development Program,” Aero Propulsion Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, Report No. AD-A116 692.
