Abstract
A contact mechanics (CM) based model of a fixed-length rigid cylinder impacting a homogeneous elastic-plastic homogeneous body was developed and includes an improved method of estimating the residual depth after impact. The nonlinear elastic behavior during unloading was accounted for to develop an improved coefficient of restitution model. The impact model was applied to study a practical case of a cylindrical feature on the slider of a magnetic storage hard disk drive impacting the disk to predict various critical impact contact parameters. The CM model was validated using a plane strain finite element model and it was found that a cylindrical feature with a longer length results in a substantial alleviation of impact damage.
1.
Gilardi
, G.
, and Sharf
, I.
, 2002, “Literature Survey of Contact Dynamics Modeling
,” Mech. Mach. Theory
0094-114X, 37
, pp. 1213
–1239
.2.
3.
Yu
, N.
, Polycarpou
, A. A.
, and Hanchi
, J. V.
, 2008, “Elastic Contact Mechanics-Based Contact and Flash Temperature Analysis of Impact-Induced Head Disk Interface Damage
,” Microsyst. Technol.
0946-7076, 14
, pp. 215
–227
.4.
Streator
, J. L.
, 2003, “Dynamic Contact of Rigid Sphere With an Elastic Half-Space: A Numerical Simulation
,” ASME J. Tribol.
0742-4787, 125
, pp. 25
–32
.5.
Johnson
, K. L.
, 1970, “The Correlation of Indentation Experiments
,” J. Mech. Phys. Solids
0022-5096, 18
, pp. 115
–126
.6.
Kogut
, I.
, and Etsion
, I.
, 2002, “Elastic-Plastic Contact Analysis of a Sphere and a Rigid Flat
,” ASME J. Appl. Mech.
0021-8936, 69
, pp. 657
–662
.7.
Jackson
, R. L.
, and Green
, I.
, 2005, “A Finite Element Study of Elasto-Plastic Hemispherical Contact Against a Rigid Flat
,” ASME J. Tribol.
0742-4787, 127
, pp. 343
–354
.8.
Ye
, N.
, and Komvopoulos
, K.
, 2001, “Three-Dimensional Contact Analysis of Elastic-Plastic Layered Media With Fractal Surface Topographies
,” Microsyst. Technol.
0946-7076, 123
, pp. 632
–640
.9.
Kogut
, L.
, and Komvopoulos
, K.
, 2004, “Analysis of the Spherical Indentation Cycle for Elastic-Perfectly Plastic Solids
,” J. Mater. Res.
0884-2914, 19
(12
), pp. 3641
–3653
.10.
Katta
, R. R.
, Polycarpou
, A. A.
, Hanchi
, J. V.
, and Roy
, M.
, 2009, “Analytical and Experimental Elastic-Plastic Impact Analysis of Magnetic Storage Head-Disk Interfaces
,” ASME J. Tribol.
0742-4787, 131
, p. 011902
.11.
Jackson
, R. L.
, Green
, I.
, and Marghitu
, D.
, 2006, “Impact of Elastic-Perfectly Spheres
,” International Joint Tribology Conference
, San Antonio, TX, Paper No. IJTC2006-12292.12.
Green
, I.
, 2005, “Poisson’s Ratio Effects and Critical Values in Spherical and Cylindrical Hertzian Contacts
,” Intl. J. App. Mech. Eng.
, 10
(3
), pp. 451
–462
.13.
Lim
, C. T.
, and Stronge
, W. J.
, 1998, “Normal Elastic-Plastic Impact in Plane Strain
,” Math. Comput. Modell.
0895-7177, 28
, pp. 323
–340
.14.
Lim
, C. T.
, and Stronge
, W. J.
, 1999, “Oblique Elastic-Plastic Impact Between Rough Cylinders in Plane Strain
,” Int. J. Eng. Sci.
0020-7225, 37
, pp. 97
–122
.15.
Wu
, C. -Y.
, Thornton
, C.
, and Li
, L. -Y.
, 2003, “Coefficients of Restitution for Elastoplastic Oblique Impacts
,” Adv. Powder Technol.
0921-8831, 14
, pp. 435
–448
.16.
Hunter
, S. C.
, 1957, “Energy Absorbed by Elastic Waves During Impact
,” J. Mech. Phys. Solids
0022-5096, 5
, pp. 162
–171
.17.
Tabor
, D.
, 1951, Hardness of Metals
, Oxford University Press
, Oxford
.18.
Goldsmith
, W.
, 1960, Impact: The Theory and Physical Behavior of Colliding Solids
, Edward Arnold
, London, UK
.19.
Thornton
, C.
, 1997, “Coefficient of Restitution for Collinear Collisions of Elastic-Perfectly Plastic Spheres
,” ASME J. Appl. Mech.
0021-8936, 64
, pp. 383
–386
.20.
Katta
, R. R.
, Polycarpou
, A. A.
, Hanchi
, J. V.
, and Crone
, R. M.
, 2009, “High Velocity Oblique Impact and Coefficient of Restitution for Head Disk Interface Operational Shock
,” ASME J. Tribol.
0742-4787, 131
, p. 021903
.21.
Lee
, S. -C.
, Hong
, S. -Y.
, Kim
, N. -Y.
, Ferber
, J.
, Che
, X.
, and Strom
, B. D.
, 2009, “Stress Induced Permanent Magnetic Signal Degradation of Perpendicular Magnetic Recording System
,” ASME J. Tribol.
0742-4787, 131
, p. 011904
.22.
Timoshenko
, S. P.
, and Goodier
, J. N.
, 1951, Theory of Elasticity
, McGraw-Hill
, New York
.23.
Abaqus, 2007, ABAQUS™, Version 6.6, Dassault Systemes S.A.
24.
Tayebi
, N.
, Conry
, T. F.
, and Polycarpou
, A. A.
, 2003, “Determination of Hardness From Nanoscratch Experiments: Corrections for Interfacial Shear Stress and Elastic Recovery
,” J. Mater. Res.
0884-2914, 18
, pp. 2150
–2162
.Copyright © 2010
by American Society of Mechanical Engineers
You do not currently have access to this content.
