... in this paper. ASTM International does not endorse any products represented in this paper. 12 01 2024 18 04 2024 23 04 2024 seismic behavior shaking table test failure mode Hilbert-Huang transform analysis National Natural Science Foundation of China under Grant 52078432...

... with different dip angles, namely 0°, 15°, 30°, 45°, 60°, 75°, and 90°. The load-deformation curves, failure modes, and tensile strengths are discussed and compared with the conventional Brazilian disc (BD) test results. The experimental results show that the FBD tests generally have two stages of failure modes...

...Chunde Ma; Zhi-hai Lv; Zelin Liu; Teng-fei Guo; Xin’ao Wei To study the mechanical properties and failure modes of the Brazilian disc under biaxial splitting loading, different stress ratios ( i ) (axial stress:lateral stress) i = 1:1, 2:1, 3:1, 4:1, and ∞:1 are experimentally applied in sandstone...

... 2020 local loading deformation localization failure mode easy fracture zone References Li   D. , Wang   E. , Kong   X. , Ali   M. , and Wang   D. , “ Mechanical Behaviors and Acoustic Emission Fractal Characteristics of Coal Specimens with a Pre-existing Flaw...

... β were analyzed. Meanwhile, five failure modes (rock tensile cracking, rock shearing failure, bedding cracking, bedding sliding failure, and rock bending) were observed from laboratory phenomena, and the corresponding anisotropy constitutive model was further developed based on the transversely...

... the fatigue behavior using 1 by 1-m dimensional RCC slab specimens obtained in the field in order to take into consideration field variability. A set of numerical analyses indicated that the failure modes of the specimens for a given loading condition appeared to be four-directional bottom-up cracks...

... the lowest value occurring under plane strain dominant condition. A new failure mode under plane strain dominant condition for perlite foam was found to be the progressive densification of individual perlite particles. 06 03 2017 30 01 2018 25 07 2018 plane stress plane strain...

... was to investigate the various strain distributions of panels with different face/core configurations that identified the critical failure modes for future design. In this research, four panels with different configurations were constructed to analyze the influence of strain distributions for bending behavior...

... four major failure modes of seal band, namely, unevenness, cohesion failure, adhesion failure, and pullout that provide the demand to carry out laboratory studies on the properties of seal band material. The following standards are referenced in the studies: (1) standard of hot-applied sealant, (2...

..., a vibration testing method is proposed that is intended to replace the conventional swing-type slam testing of a door plate module. The method is based on the concept of duplicating the same failure mode at the clamping part of the glass in a door, where the stress is concentrated. After a review...

... dynamic increase factor failure mode size effect split Hopkinson pressure bar static compressive strength References T.G. Fédération-internationale-du-béton , “ Constitutive Modelling of High Strength/High Performance Concrete ,” Bulletin (Fédération internationale du béton) , H.S. Muller...

... reinforcement. 20 11 2000 14 03 2001 centrifuge soil nail reinforcement unsaturated soil failure mode References Plumelle , C. , Schlosser , F. , Delage , P. , and Knochenmus , G. , “ French National Research Project on Soil Nailing, Clouterre ,” Geotechnical...

... and the prestressed concrete frames made of high-strength concrete with a slump of 25 cm may have at least a ductility factor of 8.0. 29 05 1995 13 12 1995 bridge construction prestressed concrete frame high-strength concrete horizontal force displacement curve hysteretic behavior failure mode...

.... The study indicated that the ACI Code provisions are conservative and the shear friction theory needs modification. 09 02 1988 16 01 1989 reinforced concrete brackets and corbels precompressed corbels ACI Code shear friction theory low span/depth ratio failure mode unbonded high...

... and that the failure is essentially tensile in nature. aggregates mortars (material) mechanical properties failure aggregate-mortar strength failure mechanism failure mode interfaces Mohr envelope tensile-shear strengths References Buyukozturk , Oral , Nilson , A. H. , and Slate , F. O...