Skip Nav Destination
Issues
January 2009
ISSN 0090-3973
EISSN 1945-7553
In this Issue
Research Papers
Determination of Volumetric Properties for Permeable Friction Course Mixtures
J. Test. Eval.. January 2009, 37(1): 1–10.
doi: https://doi.org/10.1520/JTE101696
Effects of Densification on Permeable Friction Course Mixtures
J. Test. Eval.. January 2009, 37(1): 11–20.
doi: https://doi.org/10.1520/JTE101808
Field Calibration of an Analytical Model for Pavement Friction Testing Applications
J. Test. Eval.. January 2009, 37(1): 21–30.
doi: https://doi.org/10.1520/JTE101966
Calibrating Mechanistic-Empirical Design Guide Permanent Deformation Models Based on Accelerated Pavement Testing
J. Test. Eval.. January 2009, 37(1): 31–39.
doi: https://doi.org/10.1520/JTE101854
Field Verification of Smoothness Requirements for Weigh-in-Motion Approaches
J. Test. Eval.. January 2009, 37(1): 40–47.
doi: https://doi.org/10.1520/JTE101723
Experimental determination of coupled thermal-mechanical effects on fracture toughness of sandstone
J. Test. Eval.. January 2009, 37(1): 48–52.
doi: https://doi.org/10.1520/JTE101542
Measurement of Very Low Creep Strains: A Review
J. Test. Eval.. January 2009, 37(1): 53–58.
doi: https://doi.org/10.1520/JTE101475
Instrumented Impact Tests: Effects of Machine Variables and Specimen Position
J. Test. Eval.. January 2009, 37(1): 59–68.
doi: https://doi.org/10.1520/JTE102094
Simulation of Four-Point Test for DC Electrical Resistivity of Moderately Conductive Solids—Error due to Nonideal Specimen Size and Current Electrode Configuration
J. Test. Eval.. January 2009, 37(1): 69–76.
doi: https://doi.org/10.1520/JTE101676
Erosion Test Evaluation by Noncumulative Mass Loss Data
J. Test. Eval.. January 2009, 37(1): 77–87.
doi: https://doi.org/10.1520/JTE101594
Email alerts
RSS Feeds
Comparative Evaluation of Outlier Detection Methods for the Asphalt Fracture Tests
J. Test. Eval. (March 2025)
Fatigue Resistance of Unaged and Aged Bio-bitumen: Time Sweep Test versus Linear Amplitude Sweep Test
J. Test. Eval. (March 2025)
Estimation of the Stress-Strength Parameter for a Decreasing Failure Rate Model Based on Ranked Set Samples
J. Test. Eval. (November 2024)
