Abstract
Materials intended for use in aerospace oxygen systems are commonly screened for oxygen compatibility following NASA STD 6001. This standard allows qualification of materials based on results provided by only one test method. Potential issues related to this practice are reviewed and recommendations are proposed that would lead to improved aerospace oxygen systems safety.
Issue Section:
Technical Notes
References
1.
Bryan
, C. J.
, “NASA Mechanical Impact Testing in High Pressure Oxygen
,” Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres
, ASTM STP 812, Werley
B. L.
, Ed., American Society for Testing and Materials
, Philadelphia
, 1983
, pp 9
-42
.2.
Stradling
, J. S.
, Pippen
, D. L.
, and Frye
, G. W.
, “Techniques Employed by the NASA White Sands Test Facility to Ensure Oxygen System Component Safety
,” Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres
, ASTM STP 812, Werley
B. L.
, Ed., American Society for Testing and Materials
, Philadelphia
, 1983
, pp 97
-107
.3.
Bryan
, C. J.
and Olsen
, M. G.
, “Procedure for the Selection of Materials for Use in Oxygen Systems at the John F. Kennedy Space Center
,” Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres
, ASTM STP 986, Schroll
D. W.
, Ed., American Society for Testing and Materials
, Philadelphia
, 1988
, pp 262
-267
.4.
Stradling
, J. S.
and Pippen
, D.
, “Testing of Materials in Oxygen for Kennedy Space Center
,” Summary Report No. KSC-WSTF-24, White Sands Test Facility
, Las Cruses, NM, 08
1974
.5.
Pippen
, D. L.
and Stradling
, J. S.
, “Techniques for Determination of Flash and Fire Points and Impact Sensitivity of Materials in a Gaseous Oxygen Environment
,” Materials Research and Standards
0025-5394, 06
1971
, pp 35
-43
, 53.6.
Flammability, Odor, Offgassing, and Compatibility Requirements and Test Procedures for Materials in Environments that Support Combustion
, NASA STD 6001, 09
02
1998
(formerly NHB 8060.1C).7.
ASTM
, Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
, G-86. American Society for Testing and Materials
, West Conshohocken, PA
, 2002
.8.
Hirsch
, D.
, Hshieh
, F-Y.
, Beeson
, H.
, and Bryan
, C.
, “Ignitibility in Air, Gaseous Oxygen and Oxygen-Enriched Environments of Polymers Used in Breathing-Air Devices
,” Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Eighth Volume
, ASTM STP 1319, Royals
W. T.
, Chou
T. C.
, and Steinberg
T. A.
, Eds., American Society for Testing and Materials
, West Conshohocken, PA
, 1997
, pp 359
-369
.9.
Blackstone
, W. R.
and Ku
, P. M.
, “An Assessment of Impact Test Techniques for Determining the Fire or Explosion Hazards of Materials Exposed to Liquid Oxygen
,” Materials Research and Standards
0025-5394, 06
1971
, pp 30
-35
, 52.10.
Moffett
, G. E.
, Schmidt
, N. E.
, Pedley
, M. D.
, and Linley
, L. J.
, “An Evaluation of the Liquid Oxygen Mechanical Impact Test
,” Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Fourth Volume
, ASTM STP 1040, Stoltzfus
J. M.
, Benz
F. J.
, and Stradling
J. S.
, Eds., American Society for Testing and Materials
, Philadelphia
, 1989
, pp 11
-22
.11.
McColskey
, J. D.
, Reed
, J. D.
, Simon
, N. J.
, and Bransford
, J. W.
, “Recommended Changes in ASTM Test Methods D2512-82 and G86-84 for Oxygen Compatibility Mechanical Impact Tests on Metals
,” Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Fifth Volume
, ASTM STP 1111, Stoltzfus
J. M.
, and McIlroy
K.
, Eds., American Society for Testing and Materials
, Philadelphia
, 1991
, pp. 126
-153
.12.
Stoltzfus
, J. M.
, Dees
, J.
, and Poe
, R. F.
, “Guide for Oxygen Hazards Analyses on Components and Systems
,” NASA Technical Memorandum 104823
, 10
1996
.13.
ASTM
, Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
, G63-99, Annual Book of ASTM Standards, Vol. 14.04
, American Society for Testing and Materials
, West Conshohocken, PA
, 2002
.14.
ASTM
, Standard Guide for Evaluating Metals for Oxygen Service
, G94-92. Annual Book of ASTM Standards, Vol. 14.04
, American Society for Testing and Materials
, West Conshohocken, PA
. 2002
.
This content is only available via PDF.
All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of ASTM International.
You do not currently have access to this content.
