https://orcid.org/0000-0003-4869-8893
Abstract
With advances in additive manufacturing (AM), the technology has significantly increased the applications in a wide range of industrial sectors. For example, stereolithography (SLA) has become a promising candidate for the mass production of energy absorption architected cellular materials due to its capability to fabricate complex material designs with advantageous characteristics. As stereolithography is being applied in different industrial settings, uncertainties become a critical factor that influences the performance of the products. As a solution, uncertainty quantification (UQ) is needed to understand the impact of uncertainties on the overall performance variability of the design and inform decision-makers to enhance system robustness and reliability better. This paper presented a novel framework for accelerated uncertainty quantification based on integrating physics-based computational modeling and data-driven surrogate models. The high-fidelity finite element model can be built and validated based on experimental tests. With an adaptive sampling technique, the surrogate model can be built with fewer expensive simulation runs while achieving a desirable modeling accuracy, saving the computational cost. Then, uncertainty quantification can be conducted accordingly using the developed surrogate model, which provides insights for the design and manufacturing decision-making processes of the architected cellular materials utilizing the additive manufacturing technology.
Issue Section:
-
References
1.
Monzón
, M. D.
, Ortega
, Z.
, Martínez
, A.
, and Ortega
, F.
, 2015
, “Standardization in Additive Manufacturing: Activities Carried Out by International Organizations and Projects
,” Int. J. Adv. Manuf. Technol.
, 76
(5–8
), pp. 1111
–1121
.10.1007/s00170-014-6334-12.
Pagac
, M.
, Hajnys
, J.
, Ma
, Q.-P.
, Jancar
, L.
, Jansa
, J.
, Stefek
, P.
, and Mesicek
, J.
, 2021
, “A Review of Vat Photopolymerization Technology: Materials, Applications, Challenges, and Future Trends of 3D Printing
,” Polymers
, 13
(4
), p. 598
.10.3390/polym130405983.
Regis
, J. E.
, Renteria
, A.
, Hall
, S. E.
, Hassan
, M. S.
, Marquez
, C.
, and Lin
, Y.
, 2021
, “Recent Trends and Innovation in Additive Manufacturing of Soft Functional Materials
,” Materials
, 14
(16
), p. 4521
.10.3390/ma141645214.
Weng
, Z.
, Zhou
, Y.
, Lin
, W.
, Senthil
, T.
, and Wu
, L.
, 2016
, “Structure-Property Relationship of Nano Enhanced Stereolithography Resin for Desktop SLA 3D Printer
,” Composites, Part A
, 88
, pp. 234
–242
.10.1016/j.compositesa.2016.05.0355.
Chugunov
, S.
, Smirnov
, A.
, Kholodkova
, A.
, Tikhonov
, A.
, Dubinin
, O.
, and Shishkovsky
, I.
, 2022
, “Evaluation of Stereolithography-Based Additive Manufacturing Technology for BaTiO3 Ceramics at 465 nm
,” Appl. Sci.
, 12
(1
), p. 412
.10.3390/app120104126.
Zhao
, W.
, Wang
, Z.
, Zhang
, J.
, Wang
, X.
, Xu
, Y.
, Ding
, N.
, and Peng
, Z.
, 2021
, “Vat Photopolymerization 3D Printing of Advanced Soft Sensors and Actuators: From Architecture to Function
,” Adv. Mater. Technol.
, 6
(8
), p. 2001218
.10.1002/admt.2020012187.
Lv
, Q.
, Huang
, W.
, Zheng
, M.
, Hu
, Y.
, Yan
, C.
, and Wang
, J.
, 2022
, “Understanding the Particle Effects and Interaction Effects of Crumb Rubber Modified Asphalt Regarding Bonding Properties
,” Constr. Build. Mater.
, 348
, p. 128716
.10.1016/j.conbuildmat.2022.1287168.
Mohsenizadeh
, M.
, Gasbarri
, F.
, Munther
, M.
, Beheshti
, A.
, and Davami
, K.
, 2018
, “Additively-Manufactured Lightweight Metamaterials for Energy Absorption
,” Mater. Des.
, 139
, pp. 521
–530
.10.1016/j.matdes.2017.11.0379.
Dar
, U. A.
, Mian
, H. H.
, Abid
, M.
, Nutkani
, M. B.
, Jamil
, A.
, and Sheikh
, M. Z.
, 2022
, “Quasi-Static Compression and Deformation Behavior of Additively Manufactured Flexible Polymeric Lattice Structure
,” J. Mater. Eng. Perform.
, 31
(4
), pp. 3107
–3119
.10.1007/s11665-021-06419-310.
Puzzo
, D. P.
, Arsenault
, A. C.
, Manners
, I.
, and Ozin
, G. A.
, 2009
, “Electroactive Inverse Opal: A Single Material for All Colors
,” Angew. Chem.
, 121
(5
), pp. 961
–965
.10.1002/ange.20080439111.
Armstrong
, E.
, and O'Dwyer
, C.
, 2015
, “Artificial Opal Photonic Crystals and Inverse Opal Structures–Fundamentals and Applications From Optics to Energy Storage
,” J. Mater. Chem. C
, 3
(24
), pp. 6109
–6143
.10.1039/C5TC01083G12.
do Rosário
, J. J.
, Berger
, J. B.
, Lilleodden
, E. T.
, McMeeking
, R. M.
, and Schneider
, G. A.
, 2017
, “The Stiffness and Strength of Metamaterials Based on the Inverse Opal Architecture
,” Extreme Mech. Lett.
, 12
, pp. 86
–96
.10.1016/j.eml.2016.07.00613.
Waterhouse
, G. I. N.
, and Waterland
, M. R.
, 2007
, “Opal and Inverse Opal Photonic Crystals: Fabrication and Characterization
,” Polyhedron
, 26
(2
), pp. 356
–368
.10.1016/j.poly.2006.06.02414.
Stein
, A.
, Li
, F.
, and Denny
, N. R.
, 2008
, “Morphological Control in Colloidal Crystal Templating of Inverse Opals, Hierarchical Structures, and Shaped Particles
,” Chem. Mater.
, 20
(3
), pp. 649
–666
.10.1021/cm702107n15.
Lalegani Dezaki
, M.
, and Bodaghi
, M.
, 2023
, “A Review of Recent Manufacturing Technologies for Sustainable Soft Actuators
,” Int. J. Precis. Eng. Manuf.-Green Technol.
, 10
(6
), pp. 1661
–1710
.10.1007/s40684-023-00533-416.
Wang
, K.
, Pan
, W.
, Liu
, Z.
, Wallin
, T. J.
, van Dover
, G.
, Li
, S.
, Giannelis
, E. P.
, Menguc
, Y.
, and Shepherd
, R. F.
, 2020
, “3D Printing of Viscoelastic Suspensions Via Digital Light Synthesis for Tough Nanoparticle–Elastomer Composites
,” Adv. Mater.
, 32
(25
), p. 2001646
.10.1002/adma.20200164617.
Liu
, Z.
, Pan
, W.
, Wang
, K.
, Matia
, Y.
, Xu
, A.
, Barreiros
, J. A.
, Darkes‐Burkey
, C.
, Giannelis
, E. P.
, Mengüç
, Y.
, Shepherd
, R. F.
, and Wallin
, T. J.
, 2022
, “Acoustophoretic Liquefaction for 3D Printing Ultrahigh‐Viscosity Nanoparticle Suspensions
,” Adv. Mater.
, 34
(7
), p. 2106183
.10.1002/adma.20210618318.
de Pastre
, M.-A.
, Quinsat
, Y.
, and Lartigue
, C.
, 2022
, “Effects of Additive Manufacturing Processes on Part Defects and Properties: A Classification Review
,” Int. J. Interact. Des. Manuf. (IJIDeM)
, 16
(4
), pp. 1471
–1496
.10.1007/s12008-022-00839-819.
Al-Maharma
, A. Y.
, Patil
, S. P.
, and Markert
, B.
, 2020
, “Effects of Porosity on the Mechanical Properties of Additively Manufactured Components: A Critical Review
,” Mater. Res. Express
, 7
(12
), p. 122001
.10.1088/2053-1591/abcc5d20.
Nath
, P.
, Hu
, Z.
, and Mahadevan
, S.
, 2017
, “Multi-Level Uncertainty Quantification in Additive Manufacturing
,” Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium
, Austin, TX, Aug. 7–9, pp. 922
–937
.https://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/MultiLevelUncertaintyQuantificationinAdditive.pdf21.
Lopez
, F.
, Witherell
, P.
, and Lane
, B.
, 2016
, “Identifying Uncertainty in Laser Powder Bed Fusion Additive Manufacturing Models
,” ASME J. Mech. Des.
, 138
(11
), p. 114502
.10.1115/1.403410322.
Xu
, Y.
, Wu
, H.
, Liu
, Z.
, Wang
, P.
, and Li
, Y.
, 2024
, “Multi-Task Learning for Design Under Uncertainty With Multi-Fidelity Partially Observed Information
,” ASME J. Mech. Des.
, 146
(8
), p. 081704
.10.1115/1.406449223.
Zheng
, Z.
, Xu
, Y.
, and Wang
, P.
, 2021
, “Uncertainty Quantification Analysis on Mechanical Properties of the Structured Silicon Anode Via Surrogate Models
,” J. Electrochem. Soc.
, 168
(4
), p. 040508
.10.1149/1945-7111/abf18224.
Hu
, Z.
, and Mahadevan
, S.
, 2017
, “Uncertainty Quantification and Management in Additive Manufacturing: Current Status, Needs, and Opportunities
,” Int. J. Adv. Manuf. Technol.
, 93
(5–8
), pp. 2855
–2874
.10.1007/s00170-017-0703-525.
Jiang
, Y.
, and Niu
, G.
, 2022
, “An Iterative Frequency-Domain Envelope-Tracking Filter for Dispersive Signal Decomposition in Structural Health Monitoring
,” Mech. Syst. Signal Process.
, 179
, p. 109329
.10.1016/j.ymssp.2022.10932926.
Wu
, J.
, and Wang
, P.
, 2020
, “Risk-Averse Optimization for Resilience Enhancement Under Uncertainty
,” ASME
Paper No. DETC2020-22226.10.1115/DETC2020-2222627.
Hu
, C.
, Wang
, P.
, and Youn
, B. D.
, 2014
, “Advances in System Reliability Analysis Under Uncertainty
,” Numerical Methods for Reliability and Safety Assessment: Multiscale and Multiphysics Systems
, Springer International Publishing, Cham, Switzerland, pp. 271
–303
.28.
Hu
, Z.
, and Mahadevan
, S.
, 2017
, “Uncertainty Quantification in Prediction of Material Properties During Additive Manufacturing
,” Scr. Mater.
, 135
, pp. 135
–140
.10.1016/j.scriptamat.2016.10.01429.
Ye
, J.
, Mahmoudi
, M.
, Karayagiz
, K.
, Johnson
, L.
, Seede
, R.
, Karaman
, I.
, Arroyave
, R.
, and Elwany
, A.
, 2022
, “Bayesian Calibration of Multiple Coupled Simulation Models for Metal Additive Manufacturing: A Bayesian Network Approach
,” ASME J. Risk Uncertainty Eng. Syst., Part B: Mech. Eng.
, 8
(1
), p. 011111
.10.1115/1.405227030.
Forrester
, A.
, Sobester
, A.
, and Keane
, A.
, 2008
, Engineering Design Via Surrogate Modelling: A Practical Guide
, Wiley
, Chichester, UK.31.
Bansal
, P.
, Zheng
, Z.
, Shao
, C.
, Li
, J.
, Banu
, M.
, Carlson
, B. E.
, and Li
, Y.
, 2022
, “Physics-Informed Machine Learning Assisted Uncertainty Quantification for the Corrosion of Dissimilar Material Joints
,” Reliab. Eng. Syst. Saf.
, 227
, p. 108711
.10.1016/j.ress.2022.10871132.
Jiang
, Y.
, Chen
, Y.
, and Wang
, P.
, 2024
, “An Iterative Adaptive Vold–Kalman Filter for Nonstationary Signal Decomposition in Mechatronic Transmission Fault Diagnosis Under Variable Speed Conditions
,” IEEE Trans. Ind. Inf.
, 20
(8
), pp. 10510
–10519
.10.1109/TII.2024.339353633.
Bansal
, P.
, Zheng
, Z.
, and Li
, Y.
, 2022
, “Uncertainty Quantification for Dissimilar Material Joints Under Corrosion Environment
,” ASME
Paper No. DETC2022-89654.10.1115/DETC2022-8965434.
Jiang
, J.
, Xiong
, Y.
, Zhang
, Z.
, and Rosen
, D. W.
, 2022
, “Machine Learning Integrated Design for Additive Manufacturing
,” J. Intell. Manuf.
, 33
(4
), pp. 1073
–1086
.10.1007/s10845-020-01715-635.
Jones
, D. R.
, Schonlau
, M.
, and Welch
, W. J.
, 1998
, “Efficient Global Optimization of Expensive Black-Box Functions
,” J. Global Optim.
, 13
(4
), pp. 455
–492
.10.1023/A:100830643114736.
Bichon
, B. J.
, Eldred
, M. S.
, Swiler
, L. P.
, Mahadevan
, S.
, and McFarland
, J. M.
, 2008
, “Efficient Global Reliability Analysis for Nonlinear Implicit Performance Functions
,” AIAA J.
, 46
(10
), pp. 2459
–2468
.10.2514/1.3432137.
Lee
, T. H.
, and Jung
, J. J.
, 2008
, “A Sampling Technique Enhancing Accuracy and Efficiency of Metamodel-Based RBDO: Constraint Boundary Sampling
,” Comput. Struct.
, 86
(13–14
), pp. 1463
–1476
.10.1016/j.compstruc.2007.05.02338.
Chen
, Z.
, Qiu
, H.
, Gao
, L.
, Li
, X.
, and Li
, P.
, 2014
, “A Local Adaptive Sampling Method for Reliability-Based Design Optimization Using Kriging Model
,” Struct. Multidiscip. Optim.
, 49
(3
), pp. 401
–416
.10.1007/s00158-013-0988-439.
Chen
, Z.
, Peng
, S.
, Li
, X.
, Qiu
, H.
, Xiong
, H.
, Gao
, L.
, and Li
, P.
, 2015
, “An Important Boundary Sampling Method for Reliability-Based Design Optimization Using Kriging Model
,” Struct. Multidiscip. Optim.
, 52
(1
), pp. 55
–70
.10.1007/s00158-014-1173-040.
Echard
, B.
, Gayton
, N.
, and Lemaire
, M.
, 2011
, “AK-MCS: An Active Learning Reliability Method Combining Kriging and Monte Carlo Simulation
,” Struct. Saf.
, 33
(2
), pp. 145
–154
.10.1016/j.strusafe.2011.01.00241.
Wang
, Z.
, and Wang
, P.
, 2014
, “A Maximum Confidence Enhancement Based Sequential Sampling Scheme for Simulation-Based Design
,” ASME J. Mech. Des.
, 136
(2
), p. 021006
.10.1115/1.402603342.
Mac
, G.
, Pearce
, H.
, Karri
, R.
, and Gupta
, N.
, 2021
, “Uncertainty Quantification in Dimensions Dataset of Additive Manufactured NIST Standard Test Artifact
,” Data Brief
, 38
, p. 107286
.10.1016/j.dib.2021.10728643.
Calò
, S.
, Chandler
, J. H.
, Campisano
, F.
, Obstein
, K. L.
, and Valdastri
, P.
, 2020
, “A Compression Valve for Sanitary Control of Fluid-Driven Actuators
,” IEEE/ASME Trans. Mechatron.
, 25
(2
), pp. 1005
–1015
.10.1109/TMECH.2019.296030844.
Mohamed
, M. G. A.
, Kumar
, H.
, Wang
, Z.
, Martin
, N.
, Mills
, B.
, and Kim
, K.
, 2019
, “Rapid and Inexpensive Fabrication of Multi-Depth Microfluidic Device Using High-Resolution LCD Stereolithographic 3D Printing
,” J. Manuf. Mater. Process.
, 3
(1
), p. 26
.10.3390/jmmp301002645.
Agrawal
, S.
, and Dhande
, S. G.
, 2008
, “Analysis of Geometrical Error in the Stereolithography Process Using a Stochastic Approach
,” Int. J. Prod. Res.
, 46
(13
), pp. 3537
–3562
.10.1080/0020754060105545846.
Unkovskiy
, A.
, Schmidt
, F.
, Beuer
, F.
, Li
, P.
, Spintzyk
, S.
, and Kraemer Fernandez
, P.
, 2021
, “Stereolithography vs. direct Light Processing for Rapid Manufacturing of Complete Denture Bases: An In Vitro Accuracy Analysis
,” J. Clin. Med.
, 10
(5
), p. 1070
.10.3390/jcm1005107047.
Mele
, M.
, and Campana
, G.
, 2020
, “An Experimental Approach to Manufacturability Assessment of Microfluidic Devices Produced by Stereolithography
,” Proc. Inst. Mech. Eng., Part C
, 234
(24
), pp. 4905
–4916
.10.1177/095440622093220348.
Revilla-León
, M.
, Fry
, E.
, Supaphakorn
, A.
, Barmak
, A. B.
, and Kois
, J. C.
, 2023
, “Manufacturing Accuracy of the Intaglio Surface of Definitive Resin-Ceramic Crowns Fabricated at Different Print Orientations by Using a Stereolithography Printer
,” J. Prosthet. Dent.
, In Press.10.1016/j.prosdent.2023.04.01249.
McGrath
, S.
, Zhao
, X.
, Steele
, R.
, Thombs
, B. D.
, Benedetti
, A.
, Levis
, B.
, Riehm
, K. E.
, et al., 2020
, “Estimating the Sample Mean and Standard Deviation From Commonly Reported Quantiles in Meta-Analysis
,” Stat. Methods Med. Res.
, 29
(9
), pp. 2520
–2537
.10.1177/096228021988908050.
Formlabs
, 2024
, “What Does Resolution Mean in 3d Printing?
,” Formlabs, Somerville, MA, accessed Oct. 8, 2024, https://formlabs.com/blog/3d-printer-resolution-meaning51.
Unkovskiy
, A.
, Bui
, P. H.-B.
, Schille
, C.
, Geis-Gerstorfer
, J.
, Huettig
, F.
, and Spintzyk
, S.
, 2018
, “Objects Build Orientation, Positioning, and Curing Influence Dimensional Accuracy and Flexural Properties of Stereolithographically Printed Resin
,” Dent. Mater.
, 34
(12
), pp. e324
–e333
.10.1016/j.dental.2018.09.01152.
Tahayeri
, A.
, Morgan
, M.
, Fugolin
, A. P.
, Bompolaki
, D.
, Athirasala
, A.
, Pfeifer
, C. S.
, Ferracane
, J. L.
, and Bertassoni
, L. E.
, 2018
, “3D Printed Versus Conventionally Cured Provisional Crown and Bridge Dental Materials
,” Dent. Mater.
, 34
(2
), pp. 192
–200
.10.1016/j.dental.2017.10.00353.
Xu
, Y.
, and Wang
, P.
, 2021
, “An Enhanced Squared Exponential Kernel With Manhattan Similarity Measure for High Dimensional Gaussian Process Models
,” ASME
Paper No. DETC2021-71445.10.1115/DETC2021-7144554.
Xu
, Y.
, and Wang
, P.
, 2019
, “A Comparison of Numerical Optimizers in Developing High Dimensional Surrogate Models
,” ASME
Paper No. DETC2019-97499.10.1115/DETC2019-9749955.
Bousquet
, O.
, von Luxburg
, U.
, and Rätsch
, G.
, 2003
, “Advanced Lectures on Machine Learning
,” ML Summer Schools 2003
, Springer
, Canberra, Australia
, Tübingen, Germany, Aug 4–16, Vol. 3176
, p. 2011
.56.
Xu
, Y.
, and Wang
, P.
, 2023
, “Sequential Sampling Based Asymptotic Probability Estimation for High Dimensional Rare Events
,” ASME J. Mech. Des.
, 145
(10
), p. 101701
.10.1115/1.406279057.
Xu
, Y.
, Renteria
, A.
, and Wang
, P.
, 2022
, “Adaptive Surrogate Models With Partially Observed Information
,” Reliab. Eng. Syst. Saf.
, 225
, p. 108566
.10.1016/j.ress.2022.10856658.
Xu
, Y.
, 2023
, “Developing Physics-Informed Machine Learning Models for Complex Engineering Systems Design
,” Ph.D. thesis
, University of Illinois at Urbana-Champaign
, Champaign, IL.https://hdl.handle.net/2142/12134459.
Xu
, Y.
, and Wang
, P.
, 2022
, “Adaptive Surrogate Models for Uncertainty Quantification With Partially Observed Information
,” AIAA
Paper No. 2022-1439.10.2514/6.2022-1439Copyright © 2025 by ASME
You do not currently have access to this content.
