Volume 129 Issue 3 | J. Pressure Vessel Technol.

Skip Nav Destination

Volume 129, Issue 3

August 2007

ISSN 0094-9930

EISSN 1528-8978

Research Papers

On the Mechanics of Residual Stresses in Girth Welds

P. Dong

J. Pressure Vessel Technol. August 2007, 129(3): 345–354. doi: https://doi.org/10.1115/1.2748817

Abstract

View articletitled, On the Mechanics of Residual Stresses in Girth Welds

Open the PDF for in another window

Topics: Pipes , Residual stresses , Stress , Welded joints , Welding , Stress concentration , Vessels , Geometry

Analysis of Recent Fatigue Data Using the Structural Stress Procedure in ASME Div 2 Rewrite

Pingsha Dong, Jeong K. Hong, Abílio M. P. De Jesus

J. Pressure Vessel Technol. August 2007, 129(3): 355–362. doi: https://doi.org/10.1115/1.2748818

Abstract

View articletitled, Analysis of Recent Fatigue Data Using the Structural Stress Procedure in ASME Div 2 Rewrite

Open the PDF for in another window

Topics: Fatigue , Stress , Vessels

Simulation of Structural Deformations of Flexible Piping Systems by Acoustic Excitation

Matthias K. Maess, Lothar Gaul

J. Pressure Vessel Technol. August 2007, 129(3): 363–371. doi: https://doi.org/10.1115/1.2748819

Abstract

View articletitled, Simulation of Structural Deformations of Flexible Piping Systems by Acoustic Excitation

Open the PDF for in another window

Topics: Acoustics , Deformation , Excitation , Fluids , Pipes , Piping systems , Simulation , Structural acoustics , Vibration , Wave propagation

Stresses in a Cylinder Subjected to an Internal Shock

Robert A. Leishear

J. Pressure Vessel Technol. August 2007, 129(3): 372–382. doi: https://doi.org/10.1115/1.2748820

Abstract

View articletitled, Stresses in a Cylinder Subjected to an Internal Shock

Open the PDF for in another window

Topics: Pipes , Pressure , Stress , Vibration , Shock (Mechanics) , Shock waves , Damping , Waves

Combination of Longitudinal and Transverse Ultrasonic Waves for In Situ Control of the Tightening of Bolts

Salim Chaki, Gilles Corneloup, Ivan Lillamand, Henri Walaszek

J. Pressure Vessel Technol. August 2007, 129(3): 383–390. doi: https://doi.org/10.1115/1.2748821

Abstract

View articletitled, Combination of Longitudinal and Transverse Ultrasonic Waves for In Situ Control of the Tightening of Bolts

Open the PDF for in another window

Topics: Calibration , Flight , Stress , Ultrasonic measurement , Ultrasonic waves , Waves , Acoustics

Limit Load Analysis of Cracked Components Using the Reference Volume Method

R. Adibi-Asl, R. Seshadri

J. Pressure Vessel Technol. August 2007, 129(3): 391–399. doi: https://doi.org/10.1115/1.2749288

Abstract

View articletitled, Limit Load Analysis of Cracked Components Using the Reference Volume Method

Open the PDF for in another window

Topics: Elastic moduli , Finite element analysis , Fracture (Materials) , Stress

Some Advances on Understanding of High Cycle Thermal Fatigue Crazing

Said Taheri

J. Pressure Vessel Technol. August 2007, 129(3): 400–410. doi: https://doi.org/10.1115/1.2748822

Abstract

View articletitled, Some Advances on Understanding of High Cycle Thermal Fatigue Crazing

Open the PDF for in another window

Topics: Fatigue , Fracture (Materials) , Stress , Fatigue life , Stainless steel , Cycles

Analytical Approach in Autofrettaged Spherical Pressure Vessels Considering the Bauschinger Effect

R. Adibi-Asl, P. Livieri

J. Pressure Vessel Technol. August 2007, 129(3): 411–419. doi: https://doi.org/10.1115/1.2748839

Abstract

View articletitled, Analytical Approach in Autofrettaged Spherical Pressure Vessels Considering the Bauschinger Effect

Open the PDF for in another window

Topics: Autofrettage , Hardening , Kinematics , Pressure vessels , Stress

Estimation of Master Curve Based ${RT}_{TO}$ Reference Temperature From CVN Data

Kim R. W. Wallin, Gerhard Nagel, Elisabeth Keim, Dieter Siegele

J. Pressure Vessel Technol. August 2007, 129(3): 420–425. doi: https://doi.org/10.1115/1.2748823

Abstract

View articletitled, Estimation of Master Curve Based <math xmlns="http://www.w3.org/1998/Math/MathML"><msub xmlns=""><mi>RT</mi><mi>TO</mi></msub></math> Reference Temperature From CVN Data

Open the PDF for in another window

Topics: Fluence (Radiation measurement) , Fracture toughness , Temperature , Welded joints , Pressure vessels , Steel , ASME Standards

Effect of Tightening Speed on the Torque-Tension and Wear Pattern in Bolted Connections

Sayed A. Nassar, Saravanan Ganeshmurthy, Ramanathan M. Ranganathan, Gary C. Barber

J. Pressure Vessel Technol. August 2007, 129(3): 426–440. doi: https://doi.org/10.1115/1.2749290

Abstract

View articletitled, Effect of Tightening Speed on the Torque-Tension and Wear Pattern in Bolted Connections

Open the PDF for in another window

Topics: Fasteners , Friction , Surface roughness , Tension , Thread , Torque , Wear

Three-Dimensional Identification of Semi-Elliptical Surface Crack by Means of Direct-Current Electrical Potential Difference Method With Multiple-Probe Sensor

Naoya Tada, Masayoshi Okada, Jun Iwamoto

J. Pressure Vessel Technol. August 2007, 129(3): 441–448. doi: https://doi.org/10.1115/1.2748824

Abstract

View articletitled, Three-Dimensional Identification of Semi-Elliptical Surface Crack by Means of Direct-Current Electrical Potential Difference Method With Multiple-Probe Sensor

Open the PDF for in another window

Topics: Fracture (Materials) , Probes , Surface cracks , Sensors

Influence of Data Analysis Method and Allowable Stress Criterion on Allowable Stress of Gr.122 Heat Resistant Steel

Kouichi Maruyama, Kyosuke Yoshimi

J. Pressure Vessel Technol. August 2007, 129(3): 449–453. doi: https://doi.org/10.1115/1.2748825

Abstract

View articletitled, Influence of Data Analysis Method and Allowable Stress Criterion on Allowable Stress of Gr.122 Heat Resistant Steel

Open the PDF for in another window

Topics: Creep , Rupture , Steel , Stress , Temperature

High Temperature Oxidation of $Cr - Mo$ Steels in the Context of Accelerated Rupture Testing for Creep Life Prediction

A. Al-Mazrouee, R. K. Singh Raman

J. Pressure Vessel Technol. August 2007, 129(3): 454–459. doi: https://doi.org/10.1115/1.2748826

Abstract

View articletitled, High Temperature Oxidation of <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><mi>Cr</mi><mtext>-</mtext><mi>Mo</mi></mrow></math> Steels in the Context of Accelerated Rupture Testing for Creep Life Prediction

Open the PDF for in another window

Topics: Creep , High temperature , Oxidation , Steel , Testing , Stress , Rupture

Quantitative Prediction of EAC Crack Growth Rate of Sensitized Type 304 Stainless Steel in Boiling Water Reactor Environments Based on EPFEM

He Xue, Tetsuo Shoji

J. Pressure Vessel Technol. August 2007, 129(3): 460–467. doi: https://doi.org/10.1115/1.2748827

Abstract

View articletitled, Quantitative Prediction of EAC Crack Growth Rate of Sensitized Type 304 Stainless Steel in Boiling Water Reactor Environments Based on EPFEM

Open the PDF for in another window

Topics: Fracture (Materials) , Stress , Finite element methods , Stainless steel

Limit Load Solutions for Pipes With Through-Wall Crack Under Single and Combined Loading Based on Finite Element Analyses

Nam-Su Huh, Yun-Jae Kim, Young-Jin Kim

J. Pressure Vessel Technol. August 2007, 129(3): 468–473. doi: https://doi.org/10.1115/1.2748828

Abstract

View articletitled, Limit Load Solutions for Pipes With Through-Wall Crack Under Single and Combined Loading Based on Finite Element Analyses

Open the PDF for in another window

Topics: Finite element analysis , Fracture (Materials) , Pipes , Pressure , Stress , Tension

Analysis of Loads for Nozzles in API 650 Tanks

Manfred Lengsfeld, Ken Bardia, Jaan Taagepera, Kanajett Hathaitham, Donald La Bounty, Mark Lengsfeld

J. Pressure Vessel Technol. August 2007, 129(3): 474–481. doi: https://doi.org/10.1115/1.2748829

Abstract

View articletitled, Analysis of Loads for Nozzles in API 650 Tanks

Open the PDF for in another window

Topics: Nozzles , Stress

Hybrid Expansion Revisited

Stanley Yokell

J. Pressure Vessel Technol. August 2007, 129(3): 482–487. doi: https://doi.org/10.1115/1.2748833

Abstract

View articletitled, Hybrid Expansion Revisited

Open the PDF for in another window

Topics: Explosives , Heat transfer , Polishing , Rollers , Shear (Mechanics) , Stress , Leakage , Pressure , Feedwater , Welded joints

Effect of Rising and Falling $K$ Profiles on SCC Growth Rates in High-Temperature Water

Peter L. Andresen, Martin M. Morra

J. Pressure Vessel Technol. August 2007, 129(3): 488–506. doi: https://doi.org/10.1115/1.2748830

Abstract

View articletitled, Effect of Rising and Falling <math xmlns="http://www.w3.org/1998/Math/MathML"><mi xmlns="">K</mi></math> Profiles on SCC Growth Rates in High-Temperature Water

Open the PDF for in another window

Topics: Fracture (Materials) , Stainless steel , Stress , Water , High temperature , Alloys

Motion Analysis of Pendulum Type Isolation Systems During Earthquakes (Probabilistic Study of Isolation Performance of Base Isolated Structure Considering Characteristic Dispersion of Pendulum Type Isolation Systems)

Shigeki Okamura, Satoshi Fujita

J. Pressure Vessel Technol. August 2007, 129(3): 507–515. doi: https://doi.org/10.1115/1.2748831

Abstract

View articletitled, Motion Analysis of Pendulum Type Isolation Systems During Earthquakes (Probabilistic Study of Isolation Performance of Base Isolated Structure Considering Characteristic Dispersion of Pendulum Type Isolation Systems)

Open the PDF for in another window

Topics: Friction , Rotation , Pendulums , Earthquakes , Stress

Effect of Temperature on Acoustic Emission Evaluation of FRP Vessels (Tensile Specimens)

Yizhuo Chen, Paul Ziehl, Guillermo Ramirez, Timothy J. Fowler

J. Pressure Vessel Technol. August 2007, 129(3): 516–524. doi: https://doi.org/10.1115/1.2748832

Abstract

View articletitled, Effect of Temperature on Acoustic Emission Evaluation of FRP Vessels (Tensile Specimens)

Open the PDF for in another window

Topics: Acoustic emissions , Damage , Fiber reinforced plastics , Stress , Temperature , Vessels , Resins , Tensile strength

Fatigue Response and Characterization of 350WT Steel Under Semi-Random Loading

Philip A. Rushton, Farid Taheri, David C. Stredulinsky

J. Pressure Vessel Technol. August 2007, 129(3): 525–534. doi: https://doi.org/10.1115/1.2748835

Abstract

View articletitled, Fatigue Response and Characterization of 350WT Steel Under Semi-Random Loading

Open the PDF for in another window

Topics: Delays , Fatigue , Fatigue cracks , Fracture (Materials) , Steel , Stress , Testing , Curve fitting , Cycles

Critical Velocity of a Nonlinearly Supported Multispan Tube Bundle

M. K. Au-Yang, J. A. Burgess

J. Pressure Vessel Technol. August 2007, 129(3): 535–540. doi: https://doi.org/10.1115/1.2748836

Abstract

View articletitled, Critical Velocity of a Nonlinearly Supported Multispan Tube Bundle

Open the PDF for in another window

Topics: Fluids , Turbulence , Vibration , Damping , Fluid structure interaction , Heat exchangers

Design Innovation Papers

Emergency Assessment and Repairs of a Process Tower Subjected to Corrosion Under Insulation

Clay D. Rodery

J. Pressure Vessel Technol. August 2007, 129(3): 541–549. doi: https://doi.org/10.1115/1.2748838

Abstract

View articletitled, Emergency Assessment and Repairs of a Process Tower Subjected to Corrosion Under Insulation

Open the PDF for in another window

Topics: Corrosion , Emergencies , Insulation , Maintenance , Shells , Vessels

Design and Stress Analysis of a New Quick-Opening Seal Device Connected by D-Shaped Shearing Bolts

Ping Chen, Caifu Qian, Yunxiao Zhang

J. Pressure Vessel Technol. August 2007, 129(3): 550–555. doi: https://doi.org/10.1115/1.2757188

Abstract

View articletitled, Design and Stress Analysis of a New Quick-Opening Seal Device Connected by D-Shaped Shearing Bolts

Open the PDF for in another window

Topics: Die cutting , Shearing (Deformation) , Stress analysis (Engineering) , Flanges , Design , Sealing (Process)

Research Papers

On the Mechanics of Residual Stresses in Girth Welds

Analysis of Recent Fatigue Data Using the Structural Stress Procedure in ASME Div 2 Rewrite

Simulation of Structural Deformations of Flexible Piping Systems by Acoustic Excitation

Stresses in a Cylinder Subjected to an Internal Shock

Combination of Longitudinal and Transverse Ultrasonic Waves for In Situ Control of the Tightening of Bolts

Limit Load Analysis of Cracked Components Using the Reference Volume Method

Some Advances on Understanding of High Cycle Thermal Fatigue Crazing

Analytical Approach in Autofrettaged Spherical Pressure Vessels Considering the Bauschinger Effect

Estimation of Master Curve Based ${RT}_{TO}$ Reference Temperature From CVN Data

Effect of Tightening Speed on the Torque-Tension and Wear Pattern in Bolted Connections

Three-Dimensional Identification of Semi-Elliptical Surface Crack by Means of Direct-Current Electrical Potential Difference Method With Multiple-Probe Sensor

Influence of Data Analysis Method and Allowable Stress Criterion on Allowable Stress of Gr.122 Heat Resistant Steel

High Temperature Oxidation of $Cr - Mo$ Steels in the Context of Accelerated Rupture Testing for Creep Life Prediction

Quantitative Prediction of EAC Crack Growth Rate of Sensitized Type 304 Stainless Steel in Boiling Water Reactor Environments Based on EPFEM

Limit Load Solutions for Pipes With Through-Wall Crack Under Single and Combined Loading Based on Finite Element Analyses

Analysis of Loads for Nozzles in API 650 Tanks

Hybrid Expansion Revisited

Effect of Rising and Falling $K$ Profiles on SCC Growth Rates in High-Temperature Water

Motion Analysis of Pendulum Type Isolation Systems During Earthquakes (Probabilistic Study of Isolation Performance of Base Isolated Structure Considering Characteristic Dispersion of Pendulum Type Isolation Systems)

Effect of Temperature on Acoustic Emission Evaluation of FRP Vessels (Tensile Specimens)

Fatigue Response and Characterization of 350WT Steel Under Semi-Random Loading

Critical Velocity of a Nonlinearly Supported Multispan Tube Bundle

Design Innovation Papers

Emergency Assessment and Repairs of a Process Tower Subjected to Corrosion Under Insulation

Design and Stress Analysis of a New Quick-Opening Seal Device Connected by D-Shaped Shearing Bolts

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Design Innovation Papers

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only