Fatigue evaluation in B31.1 is currently done based on equations 1 and 2 of ASME B31.1-2007 Power Piping, which only considers the displacement load ranges. However, fatigue damage, in addition to displacement load ranges, is occurring in B31.1 piping due to pressure cycling and thermal gradients. To exacerbate this, power plant design pressures and temperatures are rising, new materials are being introduced, pipes and attached components are becoming increasingly thick, and owners are requiring power plants to heat-up and cool-down at faster rates. Also, power plant owners are more and more interested in extending the life of power plants beyond their original design life. This article takes the first step in addressing the pressing need to address this additional fatigue damage by quantifying thermal gradients in the prevalent B31.1 welding end transitions in Fig. 127.4.2, or tapered transition joints (TTJs) in Appendix D, of ASME B31.1-2007 Power Piping by formulae to be able to evaluate their contribution to fatigue (see PVP2009-77148 [A Procedure to Evaluate a B31.1 Welding End Transition Joint to Include the Fatigue Effects of Thermal Gradients for Design and Plant Life Extension]). The disadvantage of this approach is that the conservatisms inherent in the calculations of thermal gradients, as per ASME Section III Subsection NB3600-2007, are also inherent in these calculations and may produce unacceptable results when evaluated as per PVP2009-77148 [A Procedure to Evaluate a B31.1 Welding End Transition Joint to Include the Fatigue Effects of Thermal Gradients for Design and Plant Life Extension]. If the results are unacceptable, it is a warning that something else needs to be done. The advantage of this approach is that it eliminates the need for a computer program to quantify these thermal gradients, a computer program that is not normally accessible to the B31.1 designer anyway. Instead, the formulae use the data that are available to the B31.1 designer, namely, physical geometry, thermal conductivity, and rate of temperature change in the fluid in the pipe. This will further help to preserve the integrity of the piping pressure boundary and, consequently, the safety of personnel in today’s power plants and into the future.
Skip Nav Destination
Article navigation
October 2010
Design Innovations
Calculating Thermal Gradients in a B31.1 Welding End Transition Joint by Formulae
David H. Creates
David H. Creates
Senior Design Engineer
Search for other works by this author on:
David H. Creates
Senior Design Engineer
J. Pressure Vessel Technol. Oct 2010, 132(5): 055001 (5 pages)
Published Online: September 23, 2010
Article history
Received:
June 16, 2009
Revised:
March 1, 2010
Online:
September 23, 2010
Published:
September 23, 2010
Citation
Creates, D. H. (September 23, 2010). "Calculating Thermal Gradients in a B31.1 Welding End Transition Joint by Formulae." ASME. J. Pressure Vessel Technol. October 2010; 132(5): 055001. https://doi.org/10.1115/1.4001427
Download citation file:
Get Email Alerts
Cited By
On the possibility of extending the crack length criterion in the master curve methodology
J. Pressure Vessel Technol
Investigation of Fracture Prediction Capability of XFEM and FEM using SENT Specimens
J. Pressure Vessel Technol
The Behavior of Elbow Elements at Pure Bending Applications Compared to Beam and Shell Element Models
J. Pressure Vessel Technol (February 2025)
Related Articles
A Procedure to Include the Additional Fatigue Effects of Thermal Gradients in a B31.1 Butt Weld of Dissimilar Metals and Welding End Transition of Similar Metals for Design and Plant Life Extension
J. Pressure Vessel Technol (April,2012)
Finite Element Predictions of Temperature Distributions in a Multipass Welded Piping Branch Junction
J. Pressure Vessel Technol (February,2005)
On the Mechanics of Residual Stresses in Girth Welds
J. Pressure Vessel Technol (August,2007)
Finite Element Prediction of Residual Stress Distributions in a Multipass Welded Piping Branch Junction
J. Pressure Vessel Technol (November,2007)
Related Proceedings Papers
Related Chapters
Part 2, Section II—Materials and Specifications
Companion Guide to the ASME Boiler & Pressure Vessel Code, Volume 1, Second Edition
Part 2, Section II—Materials and Specifications
Companion Guide to the ASME Boiler and Pressure Vessel Code, Volume 1, Third Edition
Part 2, Section II—Materials and Specifications
Online Companion Guide to the ASME Boiler & Pressure Vessel Codes