A common threat to thick-walled vessels and pipes is thermal shock from operational steady state or transient thermoelastic stresses. As such, boundary conditions must be known or determined in order to reveal the underlying thermal state. For direct problems where all boundary conditions (temperature or flux) are known, the procedure is relatively straightforward and mathematically tractable as shown by many studies. Although more practical from a measurement standpoint, the inverse problem where the boundary conditions must be determined from remotely determined temperature and/or flux data is ill-posed and inherently sensitive to errors in the data. As a result, the inverse route is rarely used to determine thermal stresses. Moreover, most analytical solutions to the inverse problem rely on a host of assumptions that usually restrict their utility to time frames before the thermal wave reaches the natural boundaries of the structure. To help offset these limitations and at the same time solve for the useful case of a thick-walled cylinder exposed to thermal loading on the internal surface, the inverse problem was solved using a least-squares determination of polynomial coefficients based on a generalized direct solution to the heat equation. Once the inverse problem was solved in this fashion and the unknown boundary condition on the internal surface determined, the resulting polynomial was used with the generalized direct solution to determine the internal temperature and stress distributions as a function of time and radial position. For a thick-walled cylinder under an internal transient with external convection, excellent agreement was seen with known temperature histories. Given the versatility of the polynomial solutions advocated, the method appears well suited for many thermal scenarios provided the analysis is restricted to the time interval used to determine the polynomial and the thermophysical properties that do not vary with temperature.
Skip Nav Destination
e-mail: aesegall@psu.edu
Article navigation
November 2006
Research Papers
Thermoelastic Stresses in Thick-Walled Vessels Under Thermal Transients via the Inverse Route
A. E. Segall
A. E. Segall
Member ASME
Engineering Science and Mechanics,
e-mail: aesegall@psu.edu
The Pennsylvania State University
, 212 EES Building, University Park, PA 16803
Search for other works by this author on:
A. E. Segall
Member ASME
Engineering Science and Mechanics,
The Pennsylvania State University
, 212 EES Building, University Park, PA 16803e-mail: aesegall@psu.edu
J. Pressure Vessel Technol. Nov 2006, 128(4): 599-604 (6 pages)
Published Online: January 19, 2006
Article history
Received:
July 24, 2005
Revised:
January 19, 2006
Citation
Segall, A. E. (January 19, 2006). "Thermoelastic Stresses in Thick-Walled Vessels Under Thermal Transients via the Inverse Route." ASME. J. Pressure Vessel Technol. November 2006; 128(4): 599–604. https://doi.org/10.1115/1.2349573
Download citation file:
Get Email Alerts
Cited By
The Behaviour of Elbow Elements at Pure Bending Applications Compared to Beam and Shell Element models
J. Pressure Vessel Technol
Measurement of Steam-Generator-Tube Vibration Damping Caused by Anti-Vibration-Bar Supports
J. Pressure Vessel Technol (February 2025)
Related Articles
Approximate Direct and Inverse Relationships for Thermal and Stress States in Thick-Walled Vessels Under Thermal Shock
J. Pressure Vessel Technol (February,2007)
Transient Surface Strains and the Deconvolution of Thermoelastic States and Boundary Conditions
J. Pressure Vessel Technol (February,2009)
Thermal Stresses in an Infinite Slab Under an Arbitrary Thermal Shock
J. Appl. Mech (September,2003)
Thermoelastic Stresses in an Axisymmetric Thick-Walled Tube Under an Arbitrary Internal Transient
J. Pressure Vessel Technol (August,2004)
Related Chapters
Analysis of Components in VIII-2
Guidebook for the Design of ASME Section VIII Pressure Vessels, Third Edition
Progress in the Development of a Thermal-Shock-Resistance Factor for Bituminous Built-Up Roofing Membranes
Engineering Properties of Roofing Systems
Flexibility Analysis
Process Piping: The Complete Guide to ASME B31.3, Third Edition