The high-temperature corrosion resistance of several boiler steels was tested experimentally in laboratory and industrial conditions in the presence of chlorine-containing external deposits. The empirical kinetic equations for the calculation of corrosion depth, depending on operational time and temperature, were established and the dependence of corrosion resistance of the austenitic steels on the alloying elements ratio Ni–Cr was analyzed.
Issue Section:
Research Papers
1.
Ots, A. A., 1987, Corrosion and fret of boiler heating surfaces, Energoatomizdat, Moscow (In Russian).
2.
James
, P. J.
, and Pinder
, L. W.
, 1997
, “Effect of Coal Chlorine on the Fireside Corrosion of Boiler Furnace Wall and Superheater–Reheater Tubing
,” Mater. High Temperature
, 14
(3
), 187
–196
.3.
Baxter
, L. L.
, and Nielsen
, H. P.
, 1997
, “The Effect of Fuel-Bound Chlorine and Alkali on Corrosion Initiation
,” Prepr. Pap. - Am. Chem. Soc., Div. Fuel Chem.
, 42
(4
), 1091
–1095
.4.
de Jong, M. P., and Leferink, R. G. I., 2001, “Experiences With the KEMA Corrosion Probe in Waste Incineration Plants and Coal Fired Boilers,” Int. Conf. Baltica V, “Condition and Life Management for Power Plants,” Porvoo, June 6–8, pp. 223–234.
5.
Nielsena
, H. P.
, Frandsena
, F. J.
, Dam-Johansena
, K.
, and Baxterb
, L. L.
, 2000
, “The Implications of Chlorine-Associated Corrosion on the Operation of Biomass-Fired Boilers
,” Prog. Energy Combust. Sci.
, 26
, 283
–298
.6.
Wieck-Hansen
, K.
, Overgaard
, P.
, and Larsen
, O. H.
, 2000
, “Cofiring Coal and Straw in a 150 MWe Power Boiler Experiences
,” Biomass Bioenergy
, 19
, 395
–409
.7.
Uusitalo, M., Vuoristo, P., and Ma¨ntyla¨, T., 2001, “Corrosion and Erosion-Corrosion of Thermally Sprayed Coatings at Elevated Temperatures,” Int. Conf. Baltica V, “Condition and Life Management for Power Plants,” Porvoo, June 6–8, pp. 247–261.
8.
Tallermo, H., and Klevtsov, I., 1998, “High Temperature Corrosion of Steels 12 Ch 1 MF, 13 CrMo 4 4 and 10 CrMo 9 10 in SF Boilers at Metal Temperatures Up to 540°C,” VGB PowerTech, No 8, pp. 94–100.
Copyright © 2005
by ASME
You do not currently have access to this content.
