The spectrum of seabed shear stresses at beds with large roughness beneath ocean surface waves in finite water depth is derived by using the wave friction factor for large roughness. It is expressed in terms of the transfer function between the waves at the surface and the shear stress at the bed, and the wave spectrum in finite water depth, which is obtained by multiplying the deep water wave spectrum with a depth correction factor. The seabed shear stress spectrum for laminar flow, which is of practical interest for flow over muds, is also given in order to compare with the rough turbulent case. Examples are included to illustrate the applicability of the seabed shear stress spectrum for practical purposes using data typical for field conditions, both for very rough beds and mud beds.
Skip Nav Destination
e-mail: dag.myrhaug@ntnu.no
Article navigation
August 2010
Ocean Engineering
Seabed Shear Stress Spectrum for Very Rough Beds
Dag Myrhaug,
Dag Myrhaug
Department of Marine Technology,
e-mail: dag.myrhaug@ntnu.no
Norwegian University of Science and Technology
, NO-7491 Trondheim, Norway
Search for other works by this author on:
Lars Erik Holmedal
Lars Erik Holmedal
Department of Marine Technology,
Norwegian University of Science and Technology
, NO-7491 Trondheim, Norway
Search for other works by this author on:
Dag Myrhaug
Department of Marine Technology,
Norwegian University of Science and Technology
, NO-7491 Trondheim, Norwaye-mail: dag.myrhaug@ntnu.no
Lars Erik Holmedal
Department of Marine Technology,
Norwegian University of Science and Technology
, NO-7491 Trondheim, NorwayJ. Offshore Mech. Arct. Eng. Aug 2010, 132(3): 031103 (5 pages)
Published Online: June 17, 2010
Article history
Received:
June 23, 2008
Revised:
September 22, 2009
Online:
June 17, 2010
Published:
June 17, 2010
Citation
Myrhaug, D., and Holmedal, L. E. (June 17, 2010). "Seabed Shear Stress Spectrum for Very Rough Beds." ASME. J. Offshore Mech. Arct. Eng. August 2010; 132(3): 031103. https://doi.org/10.1115/1.4000501
Download citation file:
Get Email Alerts
Cited By
Numerical Modelling of Fish Cage Structural Responses in Regular and Irregular Waves Using Modified XPBD
J. Offshore Mech. Arct. Eng
Slamming characteristics of a rigid wedge during symmetric and asymmetric water entry
J. Offshore Mech. Arct. Eng
Layout Optimization of Wave Energy Park Based on Multi-Objective Optimization Algorithm
J. Offshore Mech. Arct. Eng
Related Articles
Frictional Performance of U-Type Wavy Tubes
J. Fluids Eng (September,2003)
A Short Method to Compute Nusselt Numbers in Rectangular and Annular Channels With Any Ratio of Constant Heat Rate
J. Eng. Gas Turbines Power (March,2012)
Closure to “Discussion of ‘The Lomakin Effect in Annular Gas Seals Under Choked Flow Conditions’ ” (2007, ASME J. Eng. Gas Turbines Power, 129 , p. 1143)
J. Eng. Gas Turbines Power (October,2007)
Application of Linearized Friction Impedance Models to Complex Fluid Systems
J. Fluids Eng (June,1973)
Related Proceedings Papers
Related Chapters
The Design and Implement of Remote Inclinometer for Power Towers Based on MXA2500G/GSM
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
Fluid Mechanics
Engineering Practice with Oilfield and Drilling Applications
Formulation and Dynamic Behavior of Electrical Systems
Introduction to Dynamics and Control in Mechanical Engineering Systems