There is an increasing interest in developing direct calculation methods and procedures for determining extreme wave loads on ship girders (e.g. ISSC, 2000 [1]). Ships experiencing bottom and bow flare slamming have heightened the need for computational tools suitable to accurately predict motion and structural responses. The associated nonlinear impact problem is complicated by the complex free surface and body boundary conditions. This paper examines a “blended” linear–nonlinear method by which extreme loads due to bottom impact and flare slamming can be determined. Using a high-speed container ship as an example, comparisons of motions, shear and bending moments, and pressures are made in head and oblique bow-quartering waves. The time-domain computer program used in the comparison is based upon partially nonlinear models. The program, NSHIPMO, is an blended strip theory method using “impact” stations over the forward part of the ship and partially nonlinear stations over the rest. Body exact hydrostatics and Froude-Krylov excitation are used over the entire hull. The impact theory of Troesch and Kang [2] is employed to estimate the sectional nonlinear impact forces acting upon the specified nonlinear sections, while the linear theory of Salvesen et al. (STF) [3] is used to blend the remainder of the hydrodynamic forces, that is the radiation and diffraction components. Results from the simulation are presented with discussions of accuracy and time of computation. Several issues associated with the blended nonlinear time-domain simulation are presented, including modeling issues related to directional yaw-sway control and a vertical plane dynamic instability in long waves that has not previously been recognized.
Skip Nav Destination
Article navigation
August 2003
Technical Papers
Nonlinear Impact Loading in an Oblique Seaway
Patrick J. Finn,
Patrick J. Finn
Department of Naval Architecture and Marine Engineering, The University of Michigan, Ann Arbor, MI 48109-2145
Search for other works by this author on:
Robert F. Beck,
Robert F. Beck
Department of Naval Architecture and Marine Engineering, The University of Michigan, Ann Arbor, MI 48109-2145
Search for other works by this author on:
Armin W. Troesch,
Armin W. Troesch
Department of Naval Architecture and Marine Engineering, The University of Michigan, Ann Arbor, MI 48109-2145
Search for other works by this author on:
Yung Sup Shin
Yung Sup Shin
American Bureau of Shipping, Research/Technology, Houston, TX 77060
Search for other works by this author on:
Patrick J. Finn
Department of Naval Architecture and Marine Engineering, The University of Michigan, Ann Arbor, MI 48109-2145
Robert F. Beck
Department of Naval Architecture and Marine Engineering, The University of Michigan, Ann Arbor, MI 48109-2145
Armin W. Troesch
Department of Naval Architecture and Marine Engineering, The University of Michigan, Ann Arbor, MI 48109-2145
Yung Sup Shin
American Bureau of Shipping, Research/Technology, Houston, TX 77060
Contributed by the OOAE Division for publication in the JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING. Manuscript received March 2002; final revision, Aug. 2002. Associate Editor: R. Riggs.
J. Offshore Mech. Arct. Eng. Aug 2003, 125(3): 190-197 (8 pages)
Published Online: July 11, 2003
Article history
Received:
March 1, 2002
Revised:
August 1, 2002
Online:
July 11, 2003
Citation
Finn , P. J., Beck , R. F., Troesch, A. W., and Shin, Y. S. (July 11, 2003). "Nonlinear Impact Loading in an Oblique Seaway ." ASME. J. Offshore Mech. Arct. Eng. August 2003; 125(3): 190–197. https://doi.org/10.1115/1.1578499
Download citation file:
Get Email Alerts
Numerical Analysis of the Effect of Tunnel Hydrofoil—Stern Flap on the Motion Stability of a Double M-Craft in Regular Waves
J. Offshore Mech. Arct. Eng (August 2025)
On the Performance of a Data-Driven Backward Compatible Physics-Informed Neural Network for Prediction of Flow Past a Cylinder
J. Offshore Mech. Arct. Eng (August 2025)
Full-Scale Testing of Corrosion Resistant Alloy-Mechanically Lined Pipes for Submarine Pipelines
J. Offshore Mech. Arct. Eng
An Improved Direct Forcing Immersed Boundary Method With Integrated Mooring Algorithm for Floating Offshore Wind Turbines
J. Offshore Mech. Arct. Eng (August 2025)
Related Articles
Ship Vertical Loads From Using an Adaptive Mesh Pressure Integration Technique for Froude–Krylov Forces Calculation
J. Offshore Mech. Arct. Eng (February,2019)
Effects of Avoidance of Heavy Weather on the Wave-Induced Load on Ships
J. Offshore Mech. Arct. Eng (May,2008)
Estimation of Short-and Long-Term Probability Distributions of Wave-Induced Loads Acting on a Cruise Vessel in Extreme Seas
J. Offshore Mech. Arct. Eng (April,2018)
A Computationally Efficient Implementation of Nonzero-Speed Transient Green Functions for Zero-Speed Nonlinear Seakeeping Problems
J. Offshore Mech. Arct. Eng (February,2017)
Related Proceedings Papers
Related Chapters
A Computational Framework for Antibiofouling System Design
Advances in Computers and Information in Engineering Research, Volume 2
Geomatrix Model as New Tool for Improving Oil Spill Surveillance
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)
Exploration
Engineering the Everyday and the Extraordinary: Milestones in Innovation