When performing a probabilistic assessment of the reliability of deteriorating structures, we often need to integrate the results of different inspections in time, within the models used to analyze the progress of deterioration. A new framework is described in this paper. It rests on a special case of the empirical Bayes method where the non-observable parameter is a discrete random variable with a relatively small number of outcomes. Various likelihood functions are derived. They are based on mixtures of deterioration scenarios. It is shown how the method can be used to calibrate the response of a stochastic deterioration model and to merge with a time-dependent reliability analysis. Examples relating to the long-term chloride corrosion in a reinforced concrete slab are presented in the paper.

Issue Section:
Technical Papers
Keywords:
structural engineering, environmental degradation, marine systems, concrete, corrosion, reliability, Bayes methods, probability, parameter estimation
Topics:
Bayes methods, Concretes, Corrosion, Inspection, Probability, Reliability, Slabs
1.
Hartt, W. H., Lee, S. K., and Costa, J. E., 1997, “Condition Assessment and Deterioration Rate for Chloride Contaminated Reinforced Concrete Structures,” Proc. of Int. Seminar on Repair and Rehabilitation of Reinforced Concrete Structures: The State of the Art, ASCE, pp. 82–104.
2.
Bloch, A., Sorensen, J. D., and Faber, M. H., 2000, “Simplified Approach to Inspection Planning,” Proc. of 8th ASCE Spec. Conf. On Probabilistic Mechanics and Structural Reliability, CD-ROM #PMC2000-188.
3.
Breitung, K. W., 2000, “An Empirical Bayes Model for Common Cause Failures,” Reliability Engineering and Systems Safety, manuscript, Univ. of Pavia, Italy.
4.
Robbins, H., 1955, “An Empirical Bayes Approach to Statistics,” Proc. of 3rd Berkeley Symp. on Mathematical Statistics and Probability, 1, pp. 157–164.
5.
Maritz, J. S., and Lwin, T., 1989, Empirical Bayes Methods, Chapman and Hall, London, New York.
6.
Roberts, M. B., Atkins, C., Hogg, V., and Middleton, C. 2000, “A Proposed Empirical Corrosion Model for Reinforced Concrete,” Proc. of Inst. Civil Eng., 140, pp. 1–11.
7.
Wei, X., 2000 “Reliability-Based Assessment and Inspection Updating of Concrete Structures Subject to Corrosion,” Ph.D. thesis, Dept. of Civil Eng., Univ. of Calgary, Canada.
8.
Maes, M. A., 1995, “Tail Heaviness in Structural Reliability,” Proc. 7th ICASP Conf., Paris, France, M. Lemaire et al. (eds.), pp. 997–1002.
9.
Der Kiureghian, A., 1990, “Bayesian Analysis of Model Uncertainty,” Structural Reliability, Reliability and Optimization of Structural Systems, A. Der Kiureghian and P. Thoft-Christensen, (eds.), Proc. of 3rd IFIP WG7.5 Conf., Berkeley, CA pp. 211–222.
10.
Maes, M. A., and Wei, X., 2000, “Reliability of Prestressed Concrete Structures Subject to Stress Corrosion Cracking,” Proc. of 9th Int. Federation for Information Processing Working Group 7.5 Conf., A. S. Nowak and M. M. Szerzen (eds.), Univ. of Michigan Press, Ann Arbor, MI, pp. 143–156.
11.
Frangopol
,
D. M.
,
Lin
,
K.-Y.
, and
Estes
,
A. C.
,
1996
, “
Reliability of Reinforced Concrete Girders under Corrosion Attack
,”
J. Struct. Eng.
,
123
(
3
), pp.
286
–
297
.
12.
Maes, M. A. 2000 “SOROS, Second-Order Reliability in the Original Variable Space: VB program and Excel Add-in,” User Notes, Civil Eng. Dept. Report, Univ. of Calgary.
Copyright © 2002
 by ASME
You do not currently have access to this content.