Bacterial colonization of needleless injection sites (NISs) frequently results in catheter related bloodstream infections (CRBSIs). Hospitals have instituted protocols aimed at disinfecting NIS prior to access. Furthermore, several manufactures have developed devices that facilitate disinfection of NIS. Despite these steps, the incidence of CRBSI is still alarmingly high. Currently, there is no protocol or device intended to disinfect male luer connectors such as those found on IV tubing that are commonly coupled and decoupled from the NISs. Since these IV tubing connectors directly contact the NIS (which have been repeatedly shown to have varying levels of bacterial colonization), it is highly likely that they, too, will have varying levels of contamination. In order for disinfection of the NIS to be effective, the IV tubing connector must also be disinfected. Our design goal was to develop a device that could be used to disinfect a male luer style connector without allowing antiseptic into the inner lumen of the male luer. We designed a three component system that utilizes a silicone sealing cone to seal the male luer, a reservoir foam that holds 70% isopropyl alcohol (IPA), and a reaction force foam that increases the seal pressure of the sealing cone while the reservoir foam is compressed delivering the IPA to the outside surface of the male luer post. Sealing cone geometry was optimized using a custom built seal pressure test apparatus. Reservoir and reaction force foam functional parameters were assessed using an Instron test apparatus. A two phase compression stroke was designed into the device to allow for sealing and dispensing of IPA. An IPA transfer test was used to assess the transfer of disinfectant from the reservoir foam to a liquid filled male luer connector (modeling an IV tubing connector). No disinfectant was found to be transferred from the device to the inner lumen of the IV tubing connector model . To test the efficacy of the device on reducing bacterial count on the male luer, a disinfection study was performed using the optimized device. Male luers were immersed in bacterial suspensions of S. aureus, S. epidermis, P. aerginosa, and E. coli. A 4 log reduction compared with a positive control was found in each sample treated with our disinfection cap . In conclusion, we developed a device that effectively delivers an antiseptic to a male luer style connector without leaking any antiseptic to the inner lumen of the luer post
Skip Nav Destination
Article navigation
Design Of Medical Devices Conference Abstracts
Disinfection of Male Luer Style Connectors for Prevention of Catheter Related Bloodstream Infections Using an Isopropyl Alcohol Dispensing Cap
Robert W. Hitchcock
Robert W. Hitchcock
Catheter Connections
Search for other works by this author on:
James P. Kennedy
University of Utah
Richard A. Lasher
Catheter Connections
Donald Solomon
Catheter Connections
Robert W. Hitchcock
Catheter Connections
J. Med. Devices. Jun 2010, 4(2): 027509 (1 pages)
Published Online: August 9, 2010
Article history
Online:
August 9, 2010
Published:
August 9, 2010
Citation
Kennedy, J. P., Lasher, R. A., Solomon, D., and Hitchcock, R. W. (August 9, 2010). "Disinfection of Male Luer Style Connectors for Prevention of Catheter Related Bloodstream Infections Using an Isopropyl Alcohol Dispensing Cap." ASME. J. Med. Devices. June 2010; 4(2): 027509. https://doi.org/10.1115/1.3442645
Download citation file:
Get Email Alerts
Cited By
Related Articles
Better Catheter Design With Improved Liquid Flow Through Tubes
J. Med. Devices (June,2011)
Innovation and Design: Pollution Prevention Opportunities in Medical Device Design
J. Med. Devices (June,2009)
Design of a Cooling Guide Catheter for Rapid Heart Cooling
J. Med. Devices (September,2010)
Novel Approach Against Central Venous Catheter Associated Infection With Acinetobacter Baumannii Biofilm
J. Med. Devices (June,2009)
Related Proceedings Papers
Related Chapters
A Computational Framework for Antibiofouling System Design
Advances in Computers and Information in Engineering Research, Volume 2
Introduction
Biopolymers Based Micro- and Nano-Materials
Applications of Macro-, Micro- and Nano-Biomaterials Prepared using Biopolymers
Biopolymers Based Micro- and Nano-Materials