Both experimental investigation and finite element analysis were conducted to explore the mechanisms for the early stage self-loosening of bolted joints under transverse cyclic loading. The nuts were glued to the bolts using a strong thread locker in the self-loosening experiments to ensure that no backing-off of the nut occurred. Depending on the loading magnitude, the clamping force reduction ranged from 10% to more than 40% of the initial preload after 200 loading cycles. Three-dimensional elastic-plastic finite element analysis was conducted with the implementation of an advanced cyclic plasticity model. The finite element results revealed that the local cyclic plasticity occurring near the roots of the engaged threads resulted in cyclic strain ratcheting. The localized cyclic plastic deformation caused the stresses to redistribute in the bolt, and the result was the gradual loss of clamping force with loading cycles. The finite element results agreed with the experimental observations quantitatively. When the two clamped plates started to slip and the slip displacement was controlled, both experiments and finite element simulations suggested that the friction between the clamped plates has an insignificant influence on the early stage self-loosening.
Skip Nav Destination
Article navigation
September 2003
Technical Papers
A Study of Early Stage Self-Loosening of Bolted Joints
Ming Zhang,
Ming Zhang
Mechanical Engineering, University of Nevada, Reno, NV 89557
Search for other works by this author on:
Chu-Hwa Lee
Chu-Hwa Lee
Ford Motor Company, Advanced Engineering Center, 20000 Rotunda Drive, Dearborn, MI 48121
Search for other works by this author on:
Yanyao Jiang
Ming Zhang
Mechanical Engineering, University of Nevada, Reno, NV 89557
Chu-Hwa Lee
Ford Motor Company, Advanced Engineering Center, 20000 Rotunda Drive, Dearborn, MI 48121
Contributed by the Reliability, Stress Analysis and Failure Prevention Committee for publication in the JOURNAL OF MECHANICAL DESIGN. Manuscript received May 2002; rev. Feb. 2003. Associate Editor: J. C. Moosbrugger.
J. Mech. Des. Sep 2003, 125(3): 518-526 (9 pages)
Published Online: September 4, 2003
Article history
Received:
May 1, 2002
Revised:
February 1, 2003
Online:
September 4, 2003
Citation
Jiang , Y., Zhang, M., and Lee, C. (September 4, 2003). "A Study of Early Stage Self-Loosening of Bolted Joints ." ASME. J. Mech. Des. September 2003; 125(3): 518–526. https://doi.org/10.1115/1.1586936
Download citation file:
Get Email Alerts
A Dataset Generation Framework for Symmetry-Induced Mechanical Metamaterials
J. Mech. Des (April 2025)
Related Articles
Finite Element Modeling of Self-Loosening of Bolted Joints
J. Mech. Des (February,2007)
Elastic Plastic Finite Element Analysis of Bolted Joint During Tightening Process
J. Mech. Des (December,2003)
Mechanical and Thermomechanical Elastic-Plastic Contact Analysis of Layered Media With Patterned Surfaces
J. Tribol (January,2004)
An Experimental Study of Self-Loosening of Bolted Joints
J. Mech. Des (September,2004)
Related Proceedings Papers
Related Chapters
Data Tabulations
Structural Shear Joints: Analyses, Properties and Design for Repeat Loading
Understanding the Problem
Design and Application of the Worm Gear
Fatigue Analysis in the Connecting Rod of MF285 Tractor by Finite Element Method
International Conference on Advanced Computer Theory and Engineering, 4th (ICACTE 2011)