Skip Nav Destination
Issues
July 2006
ISSN 0094-4289
EISSN 1528-8889
Foreword
Special Section on Damping of Shape Memory Alloys, Composites, and Foams
J. Eng. Mater. Technol. July 2006, 128(3): 253.
doi: https://doi.org/10.1115/1.2204848
Topics:
Composite materials
,
Damping
,
Foams (Chemistry)
,
Shape memory alloys
Special Section on Damping of Shape Memory Alloys, Composites, and Foams
Effect of H-Doping on Damping Capacity of Various -Based Alloys at kHz Frequencies
J. Eng. Mater. Technol. July 2006, 128(3): 254–259.
doi: https://doi.org/10.1115/1.2203202
Topics:
Alloys
,
Damping
,
Hydrogen
,
Nickel titanium alloys
,
Temperature
,
Young's modulus
,
Internal friction
,
Noise (Sound)
,
Pollution
Small Amplitude Dynamic Properties of SMA Ribbons: Experimental Results and Modelling
J. Eng. Mater. Technol. July 2006, 128(3): 260–267.
doi: https://doi.org/10.1115/1.2204949
Topics:
Damping
,
Excitation
,
Heating
,
Modeling
,
Stiffness
,
Storage
,
Temperature
,
Testing
,
Viscoelasticity
,
Cooling
Stress-Strain-Temperature Behavior Due to Transformation in Polycrystals
J. Eng. Mater. Technol. July 2006, 128(3): 268–278.
doi: https://doi.org/10.1115/1.2204945
Topics:
Nickel titanium alloys
,
Stress
,
Temperature
,
Neutron diffraction
,
Wire
,
Thermomechanics
A Phenomenological Model for Superelastic Wires Based on Plasticity With Focus on Strain-Rate Dependency Caused by Temperature
J. Eng. Mater. Technol. July 2006, 128(3): 279–284.
doi: https://doi.org/10.1115/1.2204940
Topics:
Latent heat
,
Nickel titanium alloys
,
Plasticity
,
Stress
,
Temperature
,
Tension
,
Thermomechanics
,
Wire
,
Heat
,
Martensitic transformations
Finite Element Analysis of Adaptive-Stiffening and Shape-Control SMA Hybrid Composites
J. Eng. Mater. Technol. July 2006, 128(3): 285–293.
doi: https://doi.org/10.1115/1.2203108
Topics:
Composite building materials
,
Composite materials
,
Finite element analysis
,
Shapes
,
Temperature
,
Stress
,
Deflection
,
Simulation
,
Buckling
,
Shape memory alloys
Seismic Vibration Control Using Superelastic Shape Memory Alloys
J. Eng. Mater. Technol. July 2006, 128(3): 294–301.
doi: https://doi.org/10.1115/1.2203109
Topics:
Bracing (Construction)
,
Buckling
,
Damping
,
Earthquakes
,
Nickel titanium alloys
,
Shape memory alloys
,
Steel
,
Vibration control
,
Wire
,
Stress
Theoretical and Experimental Studies for the Application of Shape Memory Alloys in Civil Engineering
J. Eng. Mater. Technol. July 2006, 128(3): 302–311.
doi: https://doi.org/10.1115/1.2203106
Numerical and Experimental Evaluation of the Damping Properties of Shape-Memory Alloys
J. Eng. Mater. Technol. July 2006, 128(3): 312–319.
doi: https://doi.org/10.1115/1.2204948
Topics:
Computer simulation
,
Constitutive equations
,
Damping
,
Heat
,
Shape memory alloys
,
Stress
,
Stress-strain relations
,
Temperature
,
Thermomechanics
,
Wire
Micromechanical Modeling of Particulate Composites for Damping of Acoustic Waves
J. Eng. Mater. Technol. July 2006, 128(3): 320–329.
doi: https://doi.org/10.1115/1.2204943
Topics:
Acoustics
,
Approximation
,
Coating processes
,
Coatings
,
Composite materials
,
Modeling
,
Tensors
,
Waves
,
Particulate matter
,
Damping
Partial Hyperbolic-Tangent Friction Element Based Phenomenological Models for Shape Memory Alloy Pseudoelastic Hysteresis
J. Eng. Mater. Technol. July 2006, 128(3): 346–355.
doi: https://doi.org/10.1115/1.2204941
Topics:
Friction
,
Springs
,
Shape memory alloys
,
Temperature
Special Section on Damping of Shape Memory Alloys, Composites, and Foams
An Approximated Harmonic Balance Method for Nonlinear Vibration of Viscoelastic Structures
J. Eng. Mater. Technol. July 2006, 128(3): 330–334.
doi: https://doi.org/10.1115/1.2204944
Topics:
Eigenvalues
,
Nonlinear vibration
,
Shells
,
Vibration
,
Approximation
,
Plates (structures)
,
Galerkin method
,
Viscoelasticity
Shape Memory Alloys Cyclic Behavior: Experimental Study and Modeling
J. Eng. Mater. Technol. July 2006, 128(3): 335–345.
doi: https://doi.org/10.1115/1.2204947
Research Papers
Crystal Plasticity Based Fe Model for Understanding Microstructural Effects on Creep and Dwell Fatigue in Ti-6242
J. Eng. Mater. Technol. July 2006, 128(3): 356–365.
doi: https://doi.org/10.1115/1.2204942
Topics:
Creep
,
Crystals
,
Finite element model
,
Plasticity
,
Stress
,
Fatigue
,
Failure
Size Effect on Strength of Laminate-Foam Sandwich Plates
J. Eng. Mater. Technol. July 2006, 128(3): 366–374.
doi: https://doi.org/10.1115/1.2194557
Topics:
Fracture (Materials)
,
Size effect
,
Stress
,
Plates (structures)
,
Skin
,
Laminates
,
Epoxy adhesives
,
Failure
Use of Inverse Solutions for Residual Stress Measurements
J. Eng. Mater. Technol. July 2006, 128(3): 375–382.
doi: https://doi.org/10.1115/1.2204952
Topics:
Stress
,
Equilibrium (Physics)
,
Integral equations
,
Noise (Sound)
,
Deformation
Effect of Material Anisotropy and Curing Stresses on Interface Delamination Propagation Characteristics in Multiply Laminated FRP Composites
J. Eng. Mater. Technol. July 2006, 128(3): 383–392.
doi: https://doi.org/10.1115/1.2203100
Actual Safety Distance and Winding Tension to Manufacture Full Section Parts by Robotized Filament Winding
J. Eng. Mater. Technol. July 2006, 128(3): 393–400.
doi: https://doi.org/10.1115/1.2203099
Topics:
Safety
,
Tension
,
Trajectories (Physics)
,
Winding (process)
Deformation and Life Estimates for a Metal Matrix—Spherical Particulate Subjected to Thermomechanical Loading
J. Eng. Mater. Technol. July 2006, 128(3): 401–418.
doi: https://doi.org/10.1115/1.2209649
Topics:
Composite materials
,
Creep
,
Deformation
,
Simulation
,
Stress
,
Temperature
,
Particulate matter
,
Fatigue
,
Cooling
,
Damage
Buckling Analysis of Multiwalled Carbon Nanotubes Under Torsional Load Coupling With Temperature Change
J. Eng. Mater. Technol. July 2006, 128(3): 419–427.
doi: https://doi.org/10.1115/1.2203102
Topics:
Buckling
,
Multi-walled carbon nanotubes
,
Stress
,
Temperature
,
Van der Waals forces
,
Nanotubes
Material Flow in FSW of AA7075-T6 Butt Joints: Continuous Dynamic Recrystallization Phenomena
J. Eng. Mater. Technol. July 2006, 128(3): 428–435.
doi: https://doi.org/10.1115/1.2204946
Topics:
Flow (Dynamics)
,
Recrystallization
,
Finite element model
Effect of Yield Criterion on Numerical Simulation Results Using a Stress-Based Failure Criterion
J. Eng. Mater. Technol. July 2006, 128(3): 436–444.
doi: https://doi.org/10.1115/1.2204951
Combustion Synthesis of a Functionally Graded Composite
J. Eng. Mater. Technol. July 2006, 128(3): 445–450.
doi: https://doi.org/10.1115/1.2204950
Measurement and Prediction of the Residual Stress Field Generated by Side-Punching
J. Eng. Mater. Technol. July 2006, 128(3): 451–459.
doi: https://doi.org/10.1115/1.2203103
Topics:
Drilling
,
Punching (Metalworking)
,
Residual stresses
,
Stress
,
Finite element analysis
,
Aluminum alloys
Effects of Laser Surface Processing on Fracture Behavior of Silicon Nitride Ceramic
J. Eng. Mater. Technol. July 2006, 128(3): 460–467.
doi: https://doi.org/10.1115/1.2203104
Topics:
Bending strength
,
Carbon dioxide lasers
,
Fracture (Materials)
,
Fracture (Process)
,
Lasers
,
Silicon nitride ceramics
,
Grinding
,
Fractography
,
Stress
,
Ceramics
Design Innovation
Application of EDM Hole-Drilling Method to the Measurement of Residual Stress in Tool and Carbon Steels
Hwa-Teng Lee, Joachim Mayer, Fu-Chuan Hsu, Werner P. Rehbach, Thomas Weirich, Arbi Dimyati, Tzu-Yao Tai
J. Eng. Mater. Technol. July 2006, 128(3): 468–475.
doi: https://doi.org/10.1115/1.2204953
Topics:
Carbon steel
,
Drilling
,
Electrical discharge machining
,
Stress
,
Thermal conductivity
,
Strain gages
Email alerts
RSS Feeds
Evaluation of Machine Learning Models for Predicting the Hot Deformation Flow Stress of Sintered Al–Zn–Mg Alloy
J. Eng. Mater. Technol (April 2025)
Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam
J. Eng. Mater. Technol (April 2025)
Irradiation Damage Evolution Dependence on Misorientation Angle for Σ 5 Grain Boundary of Nb: An Atomistic Simulation-Based Study
J. Eng. Mater. Technol (July 2025)
Influence of Ultrasonic Surface Rolling on the Tensile and Fatigue Properties of Laser-Cladding-Repaired 300M Steel Components
J. Eng. Mater. Technol (April 2025)