New developments in high temperature ceramic materials technology have focused on obtaining nanocomposite materials with nanoscale features for an optimal control of thermal and mechanical properties. One example is the silicon carbide (SiC)–silicon nitride nanocomposites with nanosized SiC particles placed either in microsized grains or along grain boundaries (GBs). This work focuses on analyzing the influence of GBs, interfaces, and impurities on thermal and mechanical properties of a set of nanocomposites at three different temperatures (300 K, 900 K, and 1500 K). Nanocomposite thermal conductivity values predicted in this study are smaller in comparison to the bulk values . Even with the volume fraction of SiC phase being limited to maximum 40%, it is shown that the thermal conductivity values could be reduced to less than those of the bulk SiC phase by microstructural feature arrangement. Nanocomposite phonon spectral density values show a short rage structural order indicating a high degree of diffused phonon reflection. Visual analyses of the atomistic arrangements did not reveal any loss of crystallinity in the nanocomposites at high temperatures. This indicates that structural arrangement, not the phase change, is a factor controlling thermal conduction as a function of temperature. The nanocomposite deformation mechanism is a trade-off between the stress concentration caused by SiC particles and GB sliding. The temperature increase tends to work in favor of GB sliding leading to softening of structures. However, microstructural strength increases with increase in temperature when GBs are absent. GBs also contribute to reduction in thermal conductivity as well as increase in fracture strength. Replacement of sharp GBs by diffused GBs having C/N impurities, lowered thermal conductivity, and increased fracture strength. Decrease in interfaces by removal of SiC particles tends to favor an increase in thermal conductivity as well as fracture resistance. Overall, it is shown that for high temperature mechanical strength improvement, judicious placement of SiC particles and optimal control of GB atomic volume fraction are the main controlling factors.
Skip Nav Destination
e-mail: tomar@purdue.edu
Article navigation
January 2011
Research Papers
Correlation of Thermal Conduction Properties With Mechanical Deformation Characteristics of a Set of Nanocomposites
Vikas Tomar,
Vikas Tomar
School of Aeronautics and Astronautics,
e-mail: tomar@purdue.edu
Purdue University
, West Lafayette, IN 47906
Search for other works by this author on:
Vikas Samvedi
Vikas Samvedi
School of Aeronautics and Astronautics,
Purdue University
, West Lafayette, IN 47906
Search for other works by this author on:
Vikas Tomar
School of Aeronautics and Astronautics,
Purdue University
, West Lafayette, IN 47906e-mail: tomar@purdue.edu
Vikas Samvedi
School of Aeronautics and Astronautics,
Purdue University
, West Lafayette, IN 47906J. Eng. Mater. Technol. Jan 2011, 133(1): 011013 (7 pages)
Published Online: December 2, 2010
Article history
Received:
March 5, 2010
Revised:
June 23, 2010
Online:
December 2, 2010
Published:
December 2, 2010
Citation
Tomar, V., and Samvedi, V. (December 2, 2010). "Correlation of Thermal Conduction Properties With Mechanical Deformation Characteristics of a Set of Nanocomposites." ASME. J. Eng. Mater. Technol. January 2011; 133(1): 011013. https://doi.org/10.1115/1.4002646
Download citation file:
Get Email Alerts
Cited By
Evaluation of Machine Learning Models for Predicting the Hot Deformation Flow Stress of Sintered Al–Zn–Mg Alloy
J. Eng. Mater. Technol (April 2025)
Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam
J. Eng. Mater. Technol (April 2025)
Irradiation Damage Evolution Dependence on Misorientation Angle for Σ 5 Grain Boundary of Nb: An Atomistic Simulation-Based Study
J. Eng. Mater. Technol (July 2025)
Related Articles
Modeling the Thermal Conductivity and Phonon Transport in
Nanoparticle Composites Using Monte Carlo Simulation
J. Heat Transfer (April,2008)
Phonon Transport Across Mesoscopic Constrictions
J. Heat Transfer (April,2011)
Phonon Heat Conduction in Thin Films: Impacts of Thermal Boundary Resistance and Internal Heat Generation
J. Heat Transfer (April,2001)
Thermal Actuation Using Nanocomposites: A Computational Analysis
J. Heat Transfer (November,2012)
Related Chapters
Characterization of Ultra-High Temperature and Polymorphic Ceramics
Advanced Multifunctional Lightweight Aerostructures: Design, Development, and Implementation
PVDF/CO 3 O 4 Nanocomposites: Porosity, Crystallinity and Conductivity
International Conference on Advanced Computer Theory and Engineering, 4th (ICACTE 2011)
Introduction to Stress and Deformation
Introduction to Plastics Engineering