Topics: Deformation , Diffraction gratings , Nanoindentation , Simulation , Stress , Aluminum , Modeling , Temperature , Simulation results , Diamond tools

Fabrication of Foamed Polyethersulfone–Zeolite Mixed Matrix Membranes for Polymer Electrolyte Membrane Fuel Cell Humidification

Russell Borduin, Wei Li

J. Manuf. Sci. Eng. February 2017, 139(2): 021004. doi: https://doi.org/10.1115/1.4034400

Abstract

View articletitled, Fabrication of Foamed Polyethersulfone–Zeolite Mixed Matrix Membranes for Polymer Electrolyte Membrane Fuel Cell Humidification

Open the PDF for in another window

Topics: Membranes , Permeability , Water , Polymers

Classification of Failure Modes in Friction Stir Blind Riveted Lap-Shear Joints With Dissimilar Materials

Wei-Ming Wang, Haris Ali Khan, Jingjing Li, Scott F. Miller, A Zachary Trimble

J. Manuf. Sci. Eng. February 2017, 139(2): 021005. doi: https://doi.org/10.1115/1.4034280

Abstract

View articletitled, Classification of Failure Modes in Friction Stir Blind Riveted Lap-Shear Joints With Dissimilar Materials

Open the PDF for in another window

Topics: Carbon reinforced plastics , Failure , Failure mechanisms , Tension , Rivets

Die Profile Optimization of Rectangular Cross Section Extrusion in Plane Strain Condition Using Upper Bound Analysis Method and Simulated Annealing Algorithm

Hamed Farzad, Ramin Ebrahimi

J. Manuf. Sci. Eng. February 2017, 139(2): 021006. doi: https://doi.org/10.1115/1.4034336

Abstract

View articletitled, Die Profile Optimization of Rectangular Cross Section Extrusion in Plane Strain Condition Using Upper Bound Analysis Method and Simulated Annealing Algorithm

Open the PDF for in another window

Topics: Algorithms , Energy consumption , Extruding , Friction , Optimization , Plane strain , Stress , Work hardening , Deformation , Simulated annealing

Finite-Element and Residual Stress Analysis of Self-Pierce Riveting in Dissimilar Metal Sheets

Li Huang, J. F. C. Moraes, Dimitry G. Sediako, J. B. Jordon, Haiding Guo, Xuming Su

J. Manuf. Sci. Eng. February 2017, 139(2): 021007. doi: https://doi.org/10.1115/1.4034437

Abstract

View articletitled, Finite-Element and Residual Stress Analysis of Self-Pierce Riveting in Dissimilar Metal Sheets

Open the PDF for in another window

Topics: Deformation , Neutron diffraction , Riveting , Rivets , Sheet metal , Simulation , Stress , Temperature , Finite element analysis , Aluminum

Direct Printing and Electrical Characterization of Conductive Micro-Silver Tracks by Alternating Current-Pulse Modulated Electrohydrodynamic Jet Printing

Hantang Qin, Chuang Wei, Jingyan Dong, Yuan-Shin Lee

J. Manuf. Sci. Eng. February 2017, 139(2): 021008. doi: https://doi.org/10.1115/1.4033903

Abstract

View articletitled, Direct Printing and Electrical Characterization of Conductive Micro-Silver Tracks by Alternating Current-Pulse Modulated Electrohydrodynamic Jet Printing

Open the PDF for in another window

Topics: Drops , Printing , Silver

Dynamic Opportunistic Maintenance Scheduling for Series Systems Based on Theory of Constraints (TOC)–VLLTW Methodology

Xinyang Tao, Tangbin Xia, Lifeng Xi

J. Manuf. Sci. Eng. February 2017, 139(2): 021009. doi: https://doi.org/10.1115/1.4034474

Abstract

View articletitled, Dynamic Opportunistic Maintenance Scheduling for Series Systems Based on Theory of Constraints (TOC)–VLLTW Methodology

Open the PDF for in another window

Topics: Machinery , Maintenance , Pulse width modulation

Rapid Consolidation and Curing of Vacuum-Infused Thermoset Composite Parts

James Garofalo, Daniel Walczyk, Jaron Kuppers

J. Manuf. Sci. Eng. February 2017, 139(2): 021010. doi: https://doi.org/10.1115/1.4034276

Abstract

View articletitled, Rapid Consolidation and Curing of Vacuum-Infused Thermoset Composite Parts

Open the PDF for in another window

Topics: Composite materials , Compression , Elastomers , Fibers , Hardening (Curing) , Pressure , Temperature , Vacuum , Resins , Manufacturing

Table-Based Volumetric Error Compensation of Large Five-Axis Machine Tools

Jennifer Creamer, Patrick M. Sammons, Douglas A. Bristow, Robert G. Landers, Philip L. Freeman, Samuel J. Easley

J. Manuf. Sci. Eng. February 2017, 139(2): 021011. doi: https://doi.org/10.1115/1.4034399

Abstract

View articletitled, Table-Based Volumetric Error Compensation of Large Five-Axis Machine Tools

Open the PDF for in another window

Topics: Errors , Kinematics , Machine tools

Influence of Single Point Incremental Forming on Mechanical Properties and Chain Orientation in Thermoplastic Polymers

Mohammad Ali Davarpanah, Shalu Bansal, Rajiv Malhotra

J. Manuf. Sci. Eng. February 2017, 139(2): 021012. doi: https://doi.org/10.1115/1.4034036

Abstract

View articletitled, Influence of Single Point Incremental Forming on Mechanical Properties and Chain Orientation in Thermoplastic Polymers

Open the PDF for in another window

Topics: Chain , Mechanical properties , Polymers , Relaxation (Physics) , Stress , Temperature , Yield stress , Deformation , Fracture toughness

Physics-Based Multivariable Modeling and Feedback Linearization Control of Melt-Pool Geometry and Temperature in Directed Energy Deposition

Qian Wang, Jianyi Li, Michael Gouge, Abdalla R. Nassar, Panagiotis (Pan) Michaleris, Edward W. Reutzel

J. Manuf. Sci. Eng. February 2017, 139(2): 021013. doi: https://doi.org/10.1115/1.4034304

Abstract

View articletitled, Physics-Based Multivariable Modeling and Feedback Linearization Control of Melt-Pool Geometry and Temperature in Directed Energy Deposition

Open the PDF for in another window

Topics: Geometry , Lasers , Temperature , Modeling , Feedback , Steady state , Physics

A New Approach to Manufacturing Biocomposite Sandwich Structures: Investigation of Preform Shell Behavior

Lai Jiang, Daniel Walczyk, Gavin McIntyre

J. Manuf. Sci. Eng. February 2017, 139(2): 021014. doi: https://doi.org/10.1115/1.4034278

Abstract

View articletitled, A New Approach to Manufacturing Biocomposite Sandwich Structures: Investigation of Preform Shell Behavior

Open the PDF for in another window

Topics: Creep , Drying , Flax , Glues , Jute fiber , Manufacturing , Preforms , Shapes , Shells , Sandwich structures

Computational Fluid Dynamics Modeling and Online Monitoring of Aerosol Jet Printing Process

Roozbeh (Ross) Salary, Jack P. Lombardi, M. Samie Tootooni, Ryan Donovan, Prahalad K. Rao, Peter Borgesen, Mark D. Poliks

J. Manuf. Sci. Eng. February 2017, 139(2): 021015. doi: https://doi.org/10.1115/1.4034591

Abstract

View articletitled, Computational Fluid Dynamics Modeling and Online Monitoring of Aerosol Jet Printing Process

Open the PDF for in another window

Topics: Aerosols , Computational fluid dynamics , Density , Flow (Dynamics) , Gas flow , Modeling , Simulation , Printing , Nozzles , Geometry

Technical Brief

A Foil-Based Additive Manufacturing Technology for Metal Parts

Chen Chen, Yiyu Shen, Hai-Lung Tsai

J. Manuf. Sci. Eng. February 2017, 139(2): 024501. doi: https://doi.org/10.1115/1.4034139

Abstract

View articletitled, A Foil-Based Additive Manufacturing Technology for Metal Parts

Open the PDF for in another window

Topics: Additive manufacturing , Lasers , Metals , Welding , Cutting , Manufacturing , Laser cutting

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

High-fidelity Sensing Modality for Anomaly Detection in Inkjet Printing

J. Manuf. Sci. Eng

MODELING OF BALL SCREW-NUT INTERFACE STIFFNESS WITH WEAR (BALL SCREW WEAR DYNAMICS)

J. Manuf. Sci. Eng

Reproduction of Three-dimensional Microstructures on Inconel 718 utilizing Laser-textured PECM Cathodes

J. Manuf. Sci. Eng

Hyperspectral analysis of silicon nanowires manufactured through metal-assisted chemical etching

J. Manuf. Sci. Eng

In Situ Monitoring and Recognition of Printing Quality in Electrohydrodynamic Inkjet Printing via Machine Learning

J. Manuf. Sci. Eng (November 2024)

Research Papers

Weldability and Distortion of Mg AZ31-to-Galvanized Steel SPOT Plug Welding Joint by Cold Metal Transfer Method

Photocuring Temperature Study for Curl Distortion Control in Projection-Based Stereolithography

Experimental Investigation and Numerical Analysis of Mechanical Ruling for an Aluminum-Coated Diffraction Grating

Fabrication of Foamed Polyethersulfone–Zeolite Mixed Matrix Membranes for Polymer Electrolyte Membrane Fuel Cell Humidification

Classification of Failure Modes in Friction Stir Blind Riveted Lap-Shear Joints With Dissimilar Materials

Die Profile Optimization of Rectangular Cross Section Extrusion in Plane Strain Condition Using Upper Bound Analysis Method and Simulated Annealing Algorithm

Finite-Element and Residual Stress Analysis of Self-Pierce Riveting in Dissimilar Metal Sheets

Direct Printing and Electrical Characterization of Conductive Micro-Silver Tracks by Alternating Current-Pulse Modulated Electrohydrodynamic Jet Printing

Dynamic Opportunistic Maintenance Scheduling for Series Systems Based on Theory of Constraints (TOC)–VLLTW Methodology

Rapid Consolidation and Curing of Vacuum-Infused Thermoset Composite Parts

Table-Based Volumetric Error Compensation of Large Five-Axis Machine Tools

Influence of Single Point Incremental Forming on Mechanical Properties and Chain Orientation in Thermoplastic Polymers

Physics-Based Multivariable Modeling and Feedback Linearization Control of Melt-Pool Geometry and Temperature in Directed Energy Deposition

A New Approach to Manufacturing Biocomposite Sandwich Structures: Investigation of Preform Shell Behavior

Computational Fluid Dynamics Modeling and Online Monitoring of Aerosol Jet Printing Process

Technical Brief

A Foil-Based Additive Manufacturing Technology for Metal Parts

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Brief

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only