Volume 126 Issue 2 | J. Manuf. Sci. Eng.

Skip Nav Destination

Technical Papers

Process Design of Laser Forming for Three-Dimensional Thin Plates

Jin Cheng, Y. Lawrence Yao

J. Manuf. Sci. Eng. May 2004, 126(2): 217–225. doi: https://doi.org/10.1115/1.1751187

Abstract

View articletitled, Process Design of Laser Forming for Three-Dimensional Thin Plates

Open the PDF for in another window

Topics: Heating , Lasers , Plates (structures) , Process design , Shapes

Spatially Resolved Characterization of Residual Stress Induced by Micro Scale Laser Shock Peening

Hongqiang Chen, Y. Lawrence Yao, Jeffrey W. Kysar

J. Manuf. Sci. Eng. May 2004, 126(2): 226–236. doi: https://doi.org/10.1115/1.1751189

Abstract

View articletitled, Spatially Resolved Characterization of Residual Stress Induced by Micro Scale Laser Shock Peening

Open the PDF for in another window

Topics: Deformation , Diffraction , Dislocations , Laser hardening , Stress , X-ray diffraction , X-rays , Copper , Reflection , Shock (Mechanics)

Liquefier Dynamics in Fused Deposition

Anna Bellini, Selc¸uk Gu¨c¸eri, Maurizio Bertoldi

J. Manuf. Sci. Eng. May 2004, 126(2): 237–246. doi: https://doi.org/10.1115/1.1688377

Abstract

View articletitled, Liquefier Dynamics in Fused Deposition

Open the PDF for in another window

Topics: Dynamics (Mechanics) , Flow (Dynamics) , Roads , Transfer functions , Extruding , Flow control , Manufacturing , Rollers , Temperature , Torque

The Analysis and Control of Micro-Hardness Distribution During Wire Drawing

Robert B. Gifford, Alexander R. Bandar, John P. Coulter, Wojciech Z. Misiolek

J. Manuf. Sci. Eng. May 2004, 126(2): 247–254. doi: https://doi.org/10.1115/1.1688380

Abstract

View articletitled, The Analysis and Control of Micro-Hardness Distribution During Wire Drawing

Open the PDF for in another window

Topics: Microhardness , Wire , Wire drawing , Heat

Determination of a Major Design Parameter for Forward Extrusion of Spur Gears

Jong-Ho Song, Yong-Taek Im, Professor, Fellow ASME

J. Manuf. Sci. Eng. May 2004, 126(2): 255–263. doi: https://doi.org/10.1115/1.1688379

Abstract

View articletitled, Determination of a Major Design Parameter for Forward Extrusion of Spur Gears

Open the PDF for in another window

Topics: Design , Extruding , Gears , Geometry , Simulation , Spur gears , Stress , Engineering simulation , Friction

Decomposition of Thermal and Mechanical Effects on Microstructure and Hardness of Hard Turned Surfaces

Jing Shi, C. Richard Liu

J. Manuf. Sci. Eng. May 2004, 126(2): 264–273. doi: https://doi.org/10.1115/1.1751190

Abstract

View articletitled, Decomposition of Thermal and Mechanical Effects on Microstructure and Hardness of Hard Turned Surfaces

Open the PDF for in another window

Topics: Diffraction , Hardening , Heat treating (Metalworking) , Mechanical properties , Steel , Turning , X-ray diffraction , Wear , Cutting , Machining

Plasma Assisted Milling of Heat-Resistant Superalloys

L. N. Lo´pez de Lacalle, J. A. Sa´nchez, A. Lamikiz, A. Celaya

J. Manuf. Sci. Eng. May 2004, 126(2): 274–285. doi: https://doi.org/10.1115/1.1644548

Abstract

View articletitled, Plasma Assisted Milling of Heat-Resistant Superalloys

Open the PDF for in another window

Topics: Alloys , Cutting , Milling , Plasmas (Ionized gases) , Wear , Heating , Machining , Heat

Control-Oriented Modeling of Thermal Deformation of Machine Tools Based on Inverse Solution of Time-Variant Thermal Loads with Delayed Response

S. Fraser, M. H. Attia, Fellow ASME,, M. O. M. Osman, Fellow ASME,

J. Manuf. Sci. Eng. May 2004, 126(2): 286–296. doi: https://doi.org/10.1115/1.1751188

Abstract

View articletitled, Control-Oriented Modeling of Thermal Deformation of Machine Tools Based on Inverse Solution of Time-Variant Thermal Loads with Delayed Response

Open the PDF for in another window

Topics: Heat , Machine tools , Thermal deformation , Transfer functions , Errors , Delays , Temperature , Control systems , Temperature measurement , Heat conduction

Machining Process Monitoring and Control: The State-of-the-Art

Steven Y. Liang, Rogelio L. Hecker, Robert G. Landers

J. Manuf. Sci. Eng. May 2004, 126(2): 297–310. doi: https://doi.org/10.1115/1.1707035

Abstract

View articletitled, Machining Process Monitoring and Control: The State-of-the-Art

Open the PDF for in another window

Topics: Machining , Process monitoring , Chatter , Cutting , Sensors , Process control , Wear

Improved Inverse Solutions for On-Line Machine Tool Monitoring

Lorraine Olson, Robert Throne, Eric Rost

J. Manuf. Sci. Eng. May 2004, 126(2): 311–316. doi: https://doi.org/10.1115/1.1688374

Abstract

View articletitled, Improved Inverse Solutions for On-Line Machine Tool Monitoring

Open the PDF for in another window

Topics: Electrical conductivity , Machine tools , Noise (Sound) , Sensors , Temperature , Thermal conductivity , Errors , Temperature profiles

Mechanics and Dynamics of Serrated Cylindrical and Tapered End Mills

S. D. Merdol, Y. Altintas

J. Manuf. Sci. Eng. May 2004, 126(2): 317–326. doi: https://doi.org/10.1115/1.1644552

Abstract

View articletitled, Mechanics and Dynamics of Serrated Cylindrical and Tapered End Mills

Open the PDF for in another window

Topics: Cutting , Chatter , Dynamics (Mechanics) , Milling , Splines , Stability , Geometry , Vibration

Continuous Optimal Infeed Control for Cylindrical Plunge Grinding, Part 1: Methodology

Shaoqiang Dong, Graduate Research Assistant, Kourosh Danai, Professor, Stephen Malkin, Distinguished Professor, Abhijit Deshmukh, Associate Professor,

J. Manuf. Sci. Eng. May 2004, 126(2): 327–333. doi: https://doi.org/10.1115/1.1751423

Abstract

View articletitled, Continuous Optimal Infeed Control for Cylindrical Plunge Grinding, Part 1: Methodology

Open the PDF for in another window

Topics: Cycles , Grinding , Optimization , Dynamic programming

Continuous Optimal Infeed Control for Cylindrical Plunge Grinding, Part 2: Controller Design and Implementation

Shaoqiang Dong, Graduate Research Assistant, Kourosh Danai, Professor, Stephen Malkin, Distinguished Professor

J. Manuf. Sci. Eng. May 2004, 126(2): 334–340. doi: https://doi.org/10.1115/1.1751424

Abstract

View articletitled, Continuous Optimal Infeed Control for Cylindrical Plunge Grinding, Part 2: Controller Design and Implementation

Open the PDF for in another window

Topics: Control equipment , Cycles , Design , Grinding , Noise (Sound) , Wear , Safety , Control systems , Dynamic programming , Parameter estimation

Experimental Characterization of Nonlinear Dynamics Underlying the Cylindrical Grinding Process

Satish T. S. Bukkapatnam, Assistant Professor of Industrial and Systems Engineering,, Rajkumar Palanna, Manufacturing and Quality Engineering Manager,

J. Manuf. Sci. Eng. May 2004, 126(2): 341–344. doi: https://doi.org/10.1115/1.1688378

Abstract

View articletitled, Experimental Characterization of Nonlinear Dynamics Underlying the Cylindrical Grinding Process

Open the PDF for in another window

Topics: Accelerometers , Dimensions , Dynamics (Mechanics) , Fractals , Grinding , Signals , Experimental characterization , Attractors , Noise (Sound) , Nonlinear dynamics

Boundary Conformed Toolpath Generation via Laplace Based Parametric Redistribution Method

T. H. Oulee, Daniel C. H. Yang, J. J. Chuang

J. Manuf. Sci. Eng. May 2004, 126(2): 345–354. doi: https://doi.org/10.1115/1.1688373

Abstract

View articletitled, Boundary Conformed Toolpath Generation via Laplace Based Parametric Redistribution Method

Open the PDF for in another window

Topics: Algorithms , Interpolation , Laplace equations , Machining , Robustness , Shapes , Machine tools

Compliant Assembly Variation Analysis Using Component Geometric Covariance

Jaime A. Camelio, S. Jack Hu, Samuel P. Marin

J. Manuf. Sci. Eng. May 2004, 126(2): 355–360. doi: https://doi.org/10.1115/1.1644553

Abstract

View articletitled, Compliant Assembly Variation Analysis Using Component Geometric Covariance

Open the PDF for in another window

Topics: Deformation , Manufacturing , Principal component analysis

Productivity of Paced Parallel-Serial Manufacturing Lines With and Without Crossover

Theodor Freiheit, Moshe Shpitalni, S. Jack Hu

J. Manuf. Sci. Eng. May 2004, 126(2): 361–367. doi: https://doi.org/10.1115/1.1688372

Abstract

View articletitled, Productivity of Paced Parallel-Serial Manufacturing Lines With and Without Crossover

Open the PDF for in another window

Topics: Machinery , Machining , Manufacturing systems , Manufacturing , Assembly lines , Algebra

Production Line Calibration for Sensors on Actively Controlled Bullets

Mark Erickson, Graduate Research Assistant, Mark Costello, Assistant Professor

J. Manuf. Sci. Eng. May 2004, 126(2): 368–376. doi: https://doi.org/10.1115/1.1688376

Abstract

View articletitled, Production Line Calibration for Sensors on Actively Controlled Bullets

Open the PDF for in another window

Topics: Accelerometers , Calibration , Errors , Sensors , Projectiles , Kalman filters , Bullets

Modeling of Advanced Melting Zone for Manufacturing of Optical Fibers

Zhiyong Wei, Kok-Meng Lee, Zhi Zhou, Siu-Ping Hong

J. Manuf. Sci. Eng. May 2004, 126(2): 377–387. doi: https://doi.org/10.1115/1.1751426

Abstract

View articletitled, Modeling of Advanced Melting Zone for Manufacturing of Optical Fibers

Open the PDF for in another window

Topics: Furnaces , Glass , Manufacturing , Melting , Optical fiber , Preforms , Temperature , Temperature distribution , Temperature gradient , Transients (Dynamics)

Technical Briefs

Vibratory Stress Relief in Manufacturing the Rails of a Maglev System

Delin Rao,, Jingguo Ge, and, Ligong Chen

J. Manuf. Sci. Eng. May 2004, 126(2): 388–391. doi: https://doi.org/10.1115/1.1644544

Abstract

View articletitled, Vibratory Stress Relief in Manufacturing the Rails of a Maglev System

Open the PDF for in another window

Topics: Magnetic levitation , Rails , Stress , Welding , Manufacturing

Monitoring Resistance Spot Nugget Size by Electrode Displacement

D. F. Farson,, J. Z. Chen,, K. Ely and, T. Frech

J. Manuf. Sci. Eng. May 2004, 126(2): 391–394. doi: https://doi.org/10.1115/1.1644550

Abstract

View articletitled, Monitoring Resistance Spot Nugget Size by Electrode Displacement

Open the PDF for in another window

Topics: Displacement , Electrodes , Welding , Thermal expansion

A New Tool Wear Examination Model by Least Square Method for Shearing Process of Thin Metal Sheet

Zone-Ching Lin, Professor, Dar-Yuan Chang, Assistant Professor

J. Manuf. Sci. Eng. May 2004, 126(2): 395–404. doi: https://doi.org/10.1115/1.1644551

Abstract

View articletitled, A New Tool Wear Examination Model by Least Square Method for Shearing Process of Thin Metal Sheet

Open the PDF for in another window

Topics: Die cutting , Wear

Characteristics of Heat Transfer During Machining With Rotary Tools

H. A. Kishawy and, A. G. Gerber

J. Manuf. Sci. Eng. May 2004, 126(2): 404–407. doi: https://doi.org/10.1115/1.1643080

Abstract

View articletitled, Characteristics of Heat Transfer During Machining With Rotary Tools

Open the PDF for in another window

Topics: Heat transfer , Machining , Temperature , Temperature distribution , Heat , Energy conservation , Cutting

A Quantitative Sensitivity Analysis of Cutting Performances in Orthogonal Machining with Restricted Contact and Flat-Faced Tools

Ning Fang, Assistant Professor, Mem. ASME,

J. Manuf. Sci. Eng. May 2004, 126(2): 408–411. doi: https://doi.org/10.1115/1.1643081

Abstract

View articletitled, A Quantitative Sensitivity Analysis of Cutting Performances in Orthogonal Machining with Restricted Contact and Flat-Faced Tools

Open the PDF for in another window

Topics: Cutting , Machining , Sensitivity analysis , Friction , Flow (Dynamics)

Erratum

Extrusion Through Spherical Dies—An Upper Bound Analysis [ASME Journal of Manufacturing Science and Engineering, 124, pp. 92–97]

W. A. Gordon,, C. J. Van Tyne, and, S. Sriram

J. Manuf. Sci. Eng. May 2004, 126(2): 412. doi: https://doi.org/10.1115/1.1767840

Extract

View articletitled, Extrusion Through Spherical Dies—An Upper Bound Analysis [ASME Journal of Manufacturing Science and Engineering, <strong>124</strong>, pp. 92–97]

Open the PDF for in another window

Topics: Extruding , Manufacturing , Deformation , Machining , Metalworking machines

Technical Papers

Process Design of Laser Forming for Three-Dimensional Thin Plates

Spatially Resolved Characterization of Residual Stress Induced by Micro Scale Laser Shock Peening

Liquefier Dynamics in Fused Deposition

The Analysis and Control of Micro-Hardness Distribution During Wire Drawing

Determination of a Major Design Parameter for Forward Extrusion of Spur Gears

Decomposition of Thermal and Mechanical Effects on Microstructure and Hardness of Hard Turned Surfaces

Plasma Assisted Milling of Heat-Resistant Superalloys

Control-Oriented Modeling of Thermal Deformation of Machine Tools Based on Inverse Solution of Time-Variant Thermal Loads with Delayed Response

Machining Process Monitoring and Control: The State-of-the-Art

Improved Inverse Solutions for On-Line Machine Tool Monitoring

Mechanics and Dynamics of Serrated Cylindrical and Tapered End Mills

Continuous Optimal Infeed Control for Cylindrical Plunge Grinding, Part 1: Methodology

Continuous Optimal Infeed Control for Cylindrical Plunge Grinding, Part 2: Controller Design and Implementation

Experimental Characterization of Nonlinear Dynamics Underlying the Cylindrical Grinding Process

Boundary Conformed Toolpath Generation via Laplace Based Parametric Redistribution Method

Compliant Assembly Variation Analysis Using Component Geometric Covariance

Productivity of Paced Parallel-Serial Manufacturing Lines With and Without Crossover

Production Line Calibration for Sensors on Actively Controlled Bullets

Modeling of Advanced Melting Zone for Manufacturing of Optical Fibers

Technical Briefs

Vibratory Stress Relief in Manufacturing the Rails of a Maglev System

Monitoring Resistance Spot Nugget Size by Electrode Displacement

A New Tool Wear Examination Model by Least Square Method for Shearing Process of Thin Metal Sheet

Characteristics of Heat Transfer During Machining With Rotary Tools

A Quantitative Sensitivity Analysis of Cutting Performances in Orthogonal Machining with Restricted Contact and Flat-Faced Tools

Erratum

Extrusion Through Spherical Dies—An Upper Bound Analysis [ASME Journal of Manufacturing Science and Engineering, 124, pp. 92–97]

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Technical Papers

Technical Briefs

Erratum

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only