Miniaturization of injection molded parts causes changes in the relative contribution of relevant design and process parameters. As a result, scaling-related size effects occur. Size effects can be either of the first order or of the second order. First-order size effects can be predicted using standard modeling, while second order ones cannot. This paper deals with first-order size effects encountered in injection molding miniaturized parts. Through the scaling analysis of the heat transfer and flow process in injection molding, the size effects on the change of molding characteristics including viscous heating, freezing time, capillary force effect, and moldability were identified. Strategies were consequently proposed to alleviate or eliminate the scaling-related molding difficulties in molding ultrathin-wall parts and microparts. Particularly, a scalable filling process was presented, with experimental verification.

Issue Section:
Technical Papers
Keywords:
Miniaturization, Injection Molding, Scaling Analysis, Size Effect, polymer melts, injection moulding, non-Newtonian flow, shrink fitting, size effect, rheology, filling
Topics:
Cavities, Flow (Dynamics), Injection molding, Molding, Polymers, Pressure, Freezing, Temperature, Size effect, Heat conduction, Polymer melts
1.
Weber
,
L.
, and
Ehrfeld
,
W.
,
1999
, “
Micromoulding—Market Position and Development
,”
Kunststoffe
,
89
(
10
), pp.
192
–
202
.
2.
Despa
,
M. S.
,
Kelly
,
K. W.
, and
Collier
,
J. R.
,
1998
, “
Injection Molding Using High Aspect Ratio Microstructures Mold Inserts Produced by LIGA Techniques
,”
Proc. SPIE
,
3512
, pp.
286
–
294
.
3.
Friedl
,
R. W.
,
2000
, “
Injection Molding of Sub-μm Grating Optical Elements
,”
J. Injection Molding Technol.
,
4
, pp.
78
–
83
.
4.
Shah, J., Su, Y. C., and Lin, L., 1999, “Implementation and Analysis of Polymeric Replication by Micro-Injection Molding,” Proc. ASME Micro-Electro-Mechanical Systems, Nashville, ASME, New York, pp. 295–302.
5.
Yao
,
D.
, and
Kim
,
B.
,
2002
, “
Injection Molding High Aspect Ratio Microfeatures
,”
J. Injection Molding Technol.
,
6
, pp.
11
–
17
.
6.
Harris
,
C.
,
Despa
,
M. S.
, and
Kelly
,
K. W.
,
2000
, “
Design and Fabrication of a Cross Flow Micro Heat Exchanger
,”
J. Microelectromech. Syst.
,
9
, pp.
502
–
508
.
7.
Hanemann
,
T.
,
Ulrich
,
H.
,
Ruprecht
,
R.
, and
Hausselt
,
J. H.
,
1999
, “
Micromolding of Polymer Waveguides
,”
Proc. SPIE
,
3799
, pp.
225
–
229
.
8.
Gerlach
,
A.
,
Knebel
,
G.
,
Guber
,
A. E.
,
Heckele
,
M.
,
Herrmann
,
D.
,
Muslija
,
A.
, and
Schaller
,
T.
,
2002
, “
Microfabrication of Single-Use Plastic Microfluidic Devices for High-Throughput Screening and DNA Analysis
,”
Microsys. Technol.
,
7
, pp.
265
–
268
.
9.
Bauer
,
H. D.
,
Ehrfeld
,
W.
,
Paatzsch
,
T.
,
Smaglinski
,
I.
, and
Weber
,
L.
,
1999
, “
Advanced Micromolding of Optical Components
,”
Proc. SPIE
,
3878
, pp.
261
–
270
.
10.
Madou, M., 1997, Fundamentals of Microfabrication, CRC Press LLC, Boca Raton, FL.
11.
Kals
,
T. A.
, and
Eckstein
,
R.
,
2000
, “
Miniaturization in Sheet Metal Working
,”
J. Mater. Process. Technol.
,
103
, pp.
95
–
101
.
12.
Yao
,
D.
, and
Kim
,
B.
,
2002
, “
Simulation of the Filling Process in Micro Channels for Polymeric Materials
,”
J. Micromech. Microeng.
,
12
, pp.
604
–
610
.
13.
Dantzig, J. A., and Tucker III, C. L., 2001, Modeling in Materials Processing, Cambridge University Press, Cambridge, UK.
14.
Tucker III, C. L., 1989, Computer Modeling for Polymer Processing, Hanser–Oxford University Press, New York.
15.
Schlichting, H., 1968, Boundary-Layer Theory, McGraw-Hill, New York, p. 114.
16.
Hieber
,
C. A.
, and
Shen
,
S. F.
,
1980
, “
A Finite-Element/Finite-Different Simulation of the Injection-Molding Filling Process
,”
J. Non-Newtonian Fluid Mech.
,
7
, pp.
1
–
32
.
17.
Schowalter, W. R., 1978, Mechanics of Non-Newtonian Fluids, Oxford University Press, Oxford, UK.
18.
Agassant, J.-F., Avenas, P., Sergent, J.-Ph., and Carreau, P. J., 1991, Polymer Processing: Principles and Modeling, Hanser Publishers.
19.
Winter
,
H. H.
,
1977
, “
Viscous Dissipation in Shear Flows of Molten Polymers
,”
Adv. Heat Transfer
,
13
, pp.
205
–
267
.
20.
Jim, F., 1995, “Thin Wall Molding: Differences in Processing Over Standard Injection Molding,” SPE ANTEC Tech. Papers, pp. 430–433.
21.
Yao
,
D.
, and
Kim
,
B.
,
2002
, “
Increasing Flow Length in Thin Wall Injection Molding Using a Rapidly Heated Mold
,”
Polymer-Plastic Engineering Technology
,
41
, pp.
819
–
832
.
22.
Yao
,
D.
, and
Kim
,
B.
,
2002
, “
Development of Rapid Heating and Cooling Systems for Injection Molding Applications
,”
Polym. Eng. Sci.
,
42
, pp.
2471
–
2481
.
23.
Saha
,
S. K.
, and
Langille
,
P.
,
2002
, “
Heat Transfer and Pressure Drop Characteristics of Laminar Flow Through a Circular Tube With Longitudinal Strip Inserts Under Uniform Wall Heat Flux
,”
ASME J. Heat Transfer
,
124
, pp.
421
–
432
.
Copyright © 2004
 by ASME
You do not currently have access to this content.