Abstract

Metallic contaminant was found in the liquid oxygen (LOX) pre-valve screen of the shuttle main engine propulsion system on two orbiter vehicles. To investigate the potential for an ignition, NASA Johnson Space Center White Sands Test Facility performed (modified) rotating friction ignition testing in LOX. This testing simulated a contaminant particle in the low-pressure oxygen turbo pump (LPOTP) and the high-pressure oxygen turbo pump (HPOTP) of the shuttle main propulsion system. Monel® K-500 and Inconel® 718 samples represented the LPOTP and HPOTP materials. Aluminum foil tape and titanium foil represented the contaminant particles. In both the Monel® and Inconel® material configurations, the aluminum foil tape samples did not ignite after 30 s of rubbing. In contrast, all of the titanium foil samples ignited regardless of the rubbing duration or material configuration. However, the titanium foil ignitions did not propagate to the Monel and Inconel materials. Based on these results, NASA determined that the risk of a fire occurring in the turbo pumps was acceptably low.

References

1.
Benz
,
F. J.
, “
Ignition of Metals and Alloys in Gaseous Oxygen by Frictional Heating
,”
Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Second Volume, ASTM STP 910
,
M. A.
Benning
, Ed.,
ASTM International
,
West Conshohocken, PA
,
1986
.
2.
Benz
,
F. J.
,
Williams
,
R. E.
, and
Armstrong
,
D.
, “
Ignition of Metals and Alloys by High-Velocity Particles
,”
Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres, Vol. 2, ASTM STP 910
,
M. A.
Benning
, Ed.,
ASTM International
,
West Conshohocken, PA
,
1986
.
3.
Monroe
,
R. B.
,
Metal Combustion in High-Pressure Flowing Oxygen, Vol. 1
,
B.
Werley
, Ed.,
ASTM International
,
West Conshohocken, PA
,
1983
.
4.
The ASM Committee on Aluminum and Aluminum Alloys
,
Properties and Selection: Stainless Steels, Tool Materials and Special-Purpose Metals
,
American Society for Metals
,
Metals Park, OH
,
1980
.
5.
The ASM Committee on Aluminum and Aluminum Alloys
,
Properties and Selection: Nonferrous Alloys and Pure Metals
,
American Society for Metals
,
Metals Park, OH
,
1979
.
6.
Beeson
,
H. D.
,
Smith
,
S. R.
, and
Stewart
,
W. F.
,
Safe Use of Oxygen and Oxygen Systems: Handbook for Design, Operation, and Maintenance
, 2nd ed.,
ASTM International
,
West Conshohocken, PA
,
2007
.
7.
Beeson
,
H. D.
,
Safe Use of Oxygen and Oxygen Systems: Guidelines for Oxygen System Design, Materials Selection, Operations, Storage, and Transportation
, 1st ed.,
ASTM International
,
West Conshohocken, PA
,
2000
.
This content is only available via PDF.
You do not currently have access to this content.