Hydrodynamics and heat transfer in micro/nano channels filled with porous media for different porosities and Knudsen numbers, Kn, ranging from 0.1 to 10, are considered. The performance of standard lattice Boltzmann method (LBM) is confined to the microscale flows with a Knudsen number less than 0.1. Therefore, by considering the rarefaction effect on the viscosity and thermal conductivity, a modified thermal LBM is used, which is able to extend the ability of LBM to simulate wide range of Knudsen flow regimes. The present study reports the effects of the Knudsen number and porosity on the flow rate, permeability, and mean Nusselt number. The Knudsen's minimum effect for micro/nano channels filled with porous media was observed. In addition to the porosity and Knudsen number, the obstacle sizes have important role in the heat transfer, so that enhanced heat transfer is observed when the obstacle sizes decrease. For the same porosity and Knudsen number, the inline porous structure has the highest heat transfer performance.
Skip Nav Destination
Article navigation
September 2017
This article was originally published in
Journal of Heat Transfer
Research-Article
Parametric Study of Rarefaction Effects on Micro- and Nanoscale Thermal Flows in Porous Structures
A. H. Meghdadi Isfahani
A. H. Meghdadi Isfahani
Department of Mechanical Engineering,
Islamic Azad University,
Najafabad Branch,
Najafabad 8514143131, Iran
e-mails: amir_meghdadi@pmc.iaun.ac.ir;
amir_meghdadi@yahoo.com
Islamic Azad University,
Najafabad Branch,
Najafabad 8514143131, Iran
e-mails: amir_meghdadi@pmc.iaun.ac.ir;
amir_meghdadi@yahoo.com
Search for other works by this author on:
A. H. Meghdadi Isfahani
Department of Mechanical Engineering,
Islamic Azad University,
Najafabad Branch,
Najafabad 8514143131, Iran
e-mails: amir_meghdadi@pmc.iaun.ac.ir;
amir_meghdadi@yahoo.com
Islamic Azad University,
Najafabad Branch,
Najafabad 8514143131, Iran
e-mails: amir_meghdadi@pmc.iaun.ac.ir;
amir_meghdadi@yahoo.com
Contributed by the Heat Transfer Division of ASME for publication in the JOURNAL OF HEAT TRANSFER. Manuscript received September 8, 2016; final manuscript received March 11, 2017; published online May 9, 2017. Assoc. Editor: Peter Vadasz.
J. Heat Transfer. Sep 2017, 139(9): 092601 (9 pages)
Published Online: May 9, 2017
Article history
Received:
September 8, 2016
Revised:
March 11, 2017
Citation
Meghdadi Isfahani, A. H. (May 9, 2017). "Parametric Study of Rarefaction Effects on Micro- and Nanoscale Thermal Flows in Porous Structures." ASME. J. Heat Transfer. September 2017; 139(9): 092601. https://doi.org/10.1115/1.4036525
Download citation file:
Get Email Alerts
Cited By
Related Articles
Forced Convection in High Porosity Metal Foams
J. Heat Transfer (August,2000)
Forced Convective Heat Transfer in Metallic Fibrous Materials
J. Heat Transfer (August,2002)
Forced Convection Heat Transfer and Hydraulic Losses in Graphitic Foam
J. Heat Transfer (September,2007)
Porous Medium Interconnector Effects on the Thermohydraulics of Near-Compact Heat Exchangers Treated as Porous Media
J. Heat Transfer (March,2007)
Related Proceedings Papers
Related Chapters
Application of Adaptive Grayscale Morphological Operators for Image Analysis
Intelligent Engineering Systems through Artificial Neural Networks Volume 18
Macropore Spatial Variability of CT-Measured Solute Transport Parameters
Intelligent Engineering Systems through Artificial Neural Networks, Volume 20
Laminar Flow Through Porous Material
Case Studies in Fluid Mechanics with Sensitivities to Governing Variables