The critical heat flux (CHF) limit is an important consideration in the design of most flow boiling systems. Before the use of microchannels under saturated flow boiling conditions becomes widely accepted in cooling of high-heat-flux devices, such as electronics and laser diodes, it is essential to have a clear understanding of the CHF mechanism. This must be coupled with an extensive database covering a wide range of fluids, channel configurations, and operating conditions. The experiments required to obtain this information pose unique challenges. Among other issues, flow distribution among parallel channels, conjugate effects, and instrumentation need to be considered. An examination of the limited CHF data indicates that CHF in parallel microchannels seems to be the result of either an upstream compressible volume instability or an excursive instability rather than the conventional dryout mechanism. It is expected that the CHF in parallel microchannels would be higher if the flow is stabilized by an orifice at the entrance of each channel. The nature of CHF in microchannels is thus different than anticipated, but recent advances in microelectronic fabrication may make it possible to realize the higher power levels.
Skip Nav Destination
Article navigation
Article
On the Nature of Critical Heat Flux in Microchannels
A. E. Bergles, Honorary Member, ASME,,
A. E. Bergles, Honorary Member, ASME,
Mechanical Engineering Department, Massachusetts Institute of Technology, Cambridge, MA 02139
Search for other works by this author on:
S. G. Kandlikar, Fellow, ASME,
S. G. Kandlikar, Fellow, ASME,
Mechanical Engineering Department, Rochester Institute of Technology, Rochester, NY 14623
Search for other works by this author on:
A. E. Bergles, Honorary Member, ASME,
Mechanical Engineering Department, Massachusetts Institute of Technology, Cambridge, MA 02139
S. G. Kandlikar, Fellow, ASME,
Mechanical Engineering Department, Rochester Institute of Technology, Rochester, NY 14623
Manuscript received May 20, 2004; revision received September 22, 2004. Review conducted by: C. Amon.
J. Heat Transfer. Jan 2005, 127(1): 101-107 (7 pages)
Published Online: February 15, 2005
Article history
Received:
May 20, 2004
Revised:
September 22, 2004
Online:
February 15, 2005
Citation
Bergles , A. E., and Kandlikar , S. G. (February 15, 2005). "On the Nature of Critical Heat Flux in Microchannels ." ASME. J. Heat Transfer. January 2005; 127(1): 101–107. https://doi.org/10.1115/1.1839587
Download citation file:
Get Email Alerts
Cited By
On Prof. Roop Mahajan's 80th Birthday
J. Heat Mass Transfer
Thermal Hydraulic Performance and Characteristics of a Microchannel Heat Exchanger: Experimental and Numerical Investigations
J. Heat Mass Transfer (February 2025)
Related Articles
Suppression of Boiling Flow Oscillations in Parallel Microchannels by Inlet Restrictors
J. Heat Transfer (March,2006)
Pumpless Loop for Narrow Channel and Micro-Channel Boiling
J. Electron. Packag (September,2003)
Critical Heat Flux of R-123 in Silicon-Based Microchannels
J. Heat Transfer (July,2007)
Transport Phenomena in Two-Phase Micro-Channel Heat Sinks
J. Electron. Packag (June,2004)
Related Proceedings Papers
Related Chapters
Liquid Cooled Systems
Thermal Management of Telecommunication Equipment, Second Edition
Liquid Cooled Systems
Thermal Management of Telecommunications Equipment
Thermal Design Guide of Liquid Cooled Systems
Thermal Design of Liquid Cooled Microelectronic Equipment