Skip Nav Destination
Issues
July 1983
This article was originally published in
Journal of Engineering for Power
ISSN 0022-0825
In this Issue
Research Papers
A Theory for Boundary Layer Growth on the Blades of a Radial Impeller Including Endwall Influence
J. Eng. Power. July 1983, 105(3): 403–411.
doi: https://doi.org/10.1115/1.3227429
Manufacturing Methods for Erosion-Resistant Ceramic Nozzles for Small Gas Turbines
J. Eng. Power. July 1983, 105(3): 412–416.
doi: https://doi.org/10.1115/1.3227430
Topics:
Ceramics
,
Erosion
,
Gas turbines
,
Manufacturing
,
Nozzles
,
Metals
,
Corrosion
,
Engines
,
Thermal shock
,
Tooling
Transonic Compressor Development for Large Industrial Gas Turbines
J. Eng. Power. July 1983, 105(3): 417–421.
doi: https://doi.org/10.1115/1.3227431
Topics:
Compressors
,
Industrial gases
,
Turbines
,
Gas turbines
,
Pressure
,
Design
,
Flow (Dynamics)
,
Cycles
,
Mach number
,
Rotors
A Three-Dimensional Turbulent Flow Analysis Method for the Rotating Channels of a Centrifugal Turbomachine
J. Eng. Power. July 1983, 105(3): 422–429.
doi: https://doi.org/10.1115/1.3227432
Topics:
Turbomachinery
,
Turbulence
,
Flow (Dynamics)
,
Impellers
,
Numerical analysis
Effect of Using Emulsions of High Nitrogen Containing Fuels and Water in a Gas Turbine Combustor on NOx and Other Emissions
J. Eng. Power. July 1983, 105(3): 430–437.
doi: https://doi.org/10.1115/1.3227433
Topics:
Combustion chambers
,
Emissions
,
Emulsions
,
Fuels
,
Gas turbines
,
Nitrogen
,
Nitrogen oxides
,
Water
,
Coal
,
Underground injection
The Gas Turbine Heat Exchanger in the Fluidized Bed Combustor
J. Eng. Power. July 1983, 105(3): 438–445.
doi: https://doi.org/10.1115/1.3227434
Topics:
Combustion chambers
,
Fluidized beds
,
Gas turbines
,
Heat exchangers
,
Coal
,
Oxygen
,
Pressure
,
Design
,
Closed-cycle gas turbines
,
Combined heat and power
Materials Selection for Metallic Heat Exchangers in Advanced Coal-Fired Heaters
J. Eng. Power. July 1983, 105(3): 446–451.
doi: https://doi.org/10.1115/1.3227435
Topics:
Coal
,
Heat exchangers
,
Alloys
,
Combustion chambers
,
Corrosion
,
Fluidized beds
,
Fluids
,
Nickel
,
Cladding systems (Building)
,
Closed-cycle gas turbines
A Theoretical Investigation of Transonic Flows in Radial Compressor Diffusers
J. Eng. Power. July 1983, 105(3): 452–456.
doi: https://doi.org/10.1115/1.3227436
Topics:
Compressors
,
Diffusers
,
Transonic flow
,
Flow (Dynamics)
,
Boundary layers
,
Pressure
,
Blades
,
High pressure (Physics)
,
Shock (Mechanics)
Effect of Impeller-Extended Shrouds on Centrifugal Compressor Performance as a Function of Specific Speed
J. Eng. Power. July 1983, 105(3): 457–465.
doi: https://doi.org/10.1115/1.3227437
Topics:
Compressors
,
Impellers
,
Blades
,
Vaneless diffusers
,
Compression
,
Flow (Dynamics)
,
Pressure
The Design and Testing of Air-Cooled Blading for an Industrial Gas Turbine
J. Eng. Power. July 1983, 105(3): 466–473.
doi: https://doi.org/10.1115/1.3227438
Topics:
Design
,
Industrial gases
,
Testing
,
Turbines
,
Engines
,
Blades
,
Cooling
,
Gas turbines
,
High pressure (Physics)
,
Instrumentation
The Calculation of Deviation Angle in Axial-Flow Compressor Cascades
J. Eng. Power. July 1983, 105(3): 474–479.
doi: https://doi.org/10.1115/1.3227439
Topics:
Axial flow
,
Compressors
,
Vorticity
,
Turbulence
,
Algebra
,
Blades
,
Cascades (Fluid dynamics)
,
Chords (Trusses)
,
Differential equations
,
Eddies (Fluid dynamics)
Transient Vibration of High-Speed, Lightweight Rotors Due to Sudden Imbalance
J. Eng. Power. July 1983, 105(3): 480–486.
doi: https://doi.org/10.1115/1.3227440
Topics:
Rotors
,
Transients (Dynamics)
,
Vibration
,
Blades
,
Disks
,
Equations of motion
,
Machinery
,
Rotordynamics
,
Vibration analysis
Optimal Design of Squeeze Film Supports for Flexible Rotors
J. Eng. Power. July 1983, 105(3): 487–494.
doi: https://doi.org/10.1115/1.3227441
Topics:
Design
,
Rotors
,
Vibration
,
Bearings
,
Computation
,
Lubricants
,
Lubrication
,
Pressure
,
Rotor vibration
Experimental Evaluation of Squeeze Film Supported Flexible Rotors
J. Eng. Power. July 1983, 105(3): 495–503.
doi: https://doi.org/10.1115/1.3227442
Topics:
Rotors
,
Errors
,
Lubricants
,
Uncertainty
,
Vibration
,
Viscosity
Unconditionally Stable Calculation of Transonic Potential Flow Through Cascades Using an Adaptive Mesh for Shock Capture
J. Eng. Power. July 1983, 105(3): 504–513.
doi: https://doi.org/10.1115/1.3227443
Topics:
Flow (Dynamics)
,
Shock (Mechanics)
,
Density
,
Compressibility
,
Space
,
Viscosity
An Improved Time-Marching Method for Turbomachinery Flow Calculation
J. Eng. Power. July 1983, 105(3): 514–521.
doi: https://doi.org/10.1115/1.3227444
Topics:
Flow (Dynamics)
,
Turbomachinery
,
Entropy
,
Blades
,
Corners (Structural elements)
,
Errors
,
Shock (Mechanics)
The Control of Engine Vibration Using Squeeze Film Dampers
J. Eng. Power. July 1983, 105(3): 525–529.
doi: https://doi.org/10.1115/1.3227447
Topics:
Dampers
,
Engines
,
Vibration
,
Cavitation
,
Gas turbines
,
Springs
,
Stiffness
,
Vibration isolators
The Elliptic Solution of the Secondary Flow Problem
J. Eng. Power. July 1983, 105(3): 530–535.
doi: https://doi.org/10.1115/1.3227448
Topics:
Flow (Dynamics)
,
Boundary-value problems
,
Ducts
,
Inviscid flow
,
Pressure
,
Vorticity
A Quasi-Three-Dimensional Finite Element Solution for Steady Compressible Flow Through Turbomachines
J. Eng. Power. July 1983, 105(3): 536–542.
doi: https://doi.org/10.1115/1.3227449
Eigensolution Reanalysis of Rotor Dynamic Systems by the Generalized Receptance Method
J. Eng. Power. July 1983, 105(3): 543–550.
doi: https://doi.org/10.1115/1.3227450
Topics:
Dynamic systems
,
Rotors
,
Bearings
,
Design
Closed-Form, Steady-State Solution for the Unbalance Response of a Rigid Rotor in Squeeze Film Damper
J. Eng. Power. July 1983, 105(3): 551–556.
doi: https://doi.org/10.1115/1.3227451
Topics:
Dampers
,
Rotors
,
Steady state
,
Algebra
,
Bearings
,
Energy consumption
,
Fluids
,
Springs
The Effect of Journal Misalignment on the Oil-Film Forces Generated in a Squeeze Film Damper
J. Eng. Power. July 1983, 105(3): 560–564.
doi: https://doi.org/10.1115/1.3227454
Topics:
Dampers
,
Bearings
,
Clearances (Engineering)
,
Computation
,
Disks
,
Gas turbines
Unsteady Aerodynamics and Gapwise Periodicity of Oscillating Cascaded Airfoils
J. Eng. Power. July 1983, 105(3): 565–574.
doi: https://doi.org/10.1115/1.3227455
Topics:
Aerodynamics
,
Airfoils
,
Blades
,
Cascades (Fluid dynamics)
,
Pressure
,
Chords (Trusses)
,
Damping
,
Stability
,
Stress
,
Unsteady flow
Aerodynamic Damping Measurements in a Transonic Compressor
J. Eng. Power. July 1983, 105(3): 575–584.
doi: https://doi.org/10.1115/1.3227456
Topics:
Compressors
,
Damping
,
Blades
,
Disks
,
Structural dynamics
,
Dimensional analysis
,
Equations of motion
,
Rotors
,
Shock (Mechanics)
,
Test facilities
In-Plane Inertial Coupling in Tuned and Severely Mistuned Bladed Disks
J. Eng. Power. July 1983, 105(3): 585–590.
doi: https://doi.org/10.1115/1.3227457
Topics:
Disks
,
Blades
,
Rotors
,
Cantilevers
,
Compressors
,
Resonance
An Improved Method for Calculating Critical Speeds and Rotordynamic Stability of Turbomachinery
J. Eng. Power. July 1983, 105(3): 591–595.
doi: https://doi.org/10.1115/1.3227458
Topics:
Stability
,
Turbomachinery
,
Bearings
,
Damping
,
Polynomials
,
Rotors
,
Computer software
,
Modeling
Comparison of Two- and Three-Dimensional Flow Computations With Laser Anemometer Measurements in a Transonic Compressor Rotor
J. Eng. Power. July 1983, 105(3): 596–605.
doi: https://doi.org/10.1115/1.3227459
Topics:
Compressors
,
Computation
,
Flow (Dynamics)
,
Lasers
,
Rotors
,
Blades
,
Design
,
Mach number
,
Pressure
,
Waves
Nonlinear Analysis of Rotor-Bearing Systems Using Component Mode Synthesis
J. Eng. Power. July 1983, 105(3): 606–614.
doi: https://doi.org/10.1115/1.3227460
Topics:
Bearings
,
Rotors
,
Blades
,
Computer software
,
Dampers
,
Dynamics (Mechanics)
,
Nonlinear systems
,
Shock (Mechanics)
,
Simulation
,
Stress
The Effect of Temperature Ratios on the Film Cooling Process
J. Eng. Power. July 1983, 105(3): 615–620.
doi: https://doi.org/10.1115/1.3227461
Topics:
Film cooling
,
Temperature
,
Heat transfer
,
Wall temperature
,
Gas turbines
,
Wind tunnels
RACER Conceptual Design
J. Eng. Power. July 1983, 105(3): 621–626.
doi: https://doi.org/10.1115/1.3227462
Topics:
Conceptual design
,
Design
,
Energy recovery
,
Exhaust systems
,
Fuels
,
Gas turbines
,
Heat recovery
,
Horsepower
,
Navy
,
Propulsion
Investigation of F/A-18A Engine Throttle Usage and Parametric Sensitivities
J. Eng. Power. July 1983, 105(3): 627–634.
doi: https://doi.org/10.1115/1.3227463
Topics:
Engines
,
Aircraft
,
Cycles
,
Flight
,
Design
,
Durability
,
Composite materials
,
Navy
,
Rivers
,
Simulation models
The Feasibility of Water Injection Into the Turbine Coolant to Permit Gas Turbine Contingency Power for Helicopter Application
J. Eng. Power. July 1983, 105(3): 635–642.
doi: https://doi.org/10.1115/1.3227464
Topics:
Coolants
,
Gas turbines
,
Turbines
,
Underground injection
,
Engines
,
Temperature
,
Rupture
,
Stress
,
Water
,
Cooling
Inertia Effects on the Dynamics of a Disk Levitated by Incompressible Laminar Fluid Flow
J. Eng. Power. July 1983, 105(3): 643–653.
doi: https://doi.org/10.1115/1.3227465
Topics:
Disks
,
Dynamics (Mechanics)
,
Fluid dynamics
,
Inertia (Mechanics)
,
Flow (Dynamics)
,
Fluids
,
Damping
,
Differential equations
,
Film thickness
,
Flat plates
Vectoring Exhaust Systems for STOL Tactical Aircraft
J. Eng. Power. July 1983, 105(3): 654–662.
doi: https://doi.org/10.1115/1.3227466
Topics:
Aircraft
,
Exhaust systems
,
Nozzles
,
Equilibrium (Physics)
,
Propulsion systems
,
Thrust
F-14 Aircraft and Propulsion Control Integration Evaluation
J. Eng. Power. July 1983, 105(3): 663–668.
doi: https://doi.org/10.1115/1.3227467
Topics:
Aircraft
,
Propulsion
,
Engines
,
Navy
,
Aerospace industry
,
Air flow
,
Atomic force microscopy
,
Control systems
,
Fuel consumption
,
Fuel management
LMFBR Operational and Experimental In-Core, Local-Fault Experience, Primarily With Oxide Fuel Elements
J. Eng. Power. July 1983, 105(3): 669–678.
doi: https://doi.org/10.1115/1.3227468
Topics:
Fuels
,
Liquid metal fast breeder reactors
,
Failure
,
Neutrons
,
Nuclear fission
,
Signals
,
Sodium
,
Thermal reactors
The LMFBR Fuel-Design Environment for Endurance Testing, Primarily of Oxide Fuel Elements With Local Faults
J. Eng. Power. July 1983, 105(3): 679–689.
doi: https://doi.org/10.1115/1.3227469
Topics:
Design
,
Fuels
,
Liquid metal fast breeder reactors
,
Testing
,
Failure
,
Neutrons
,
Nuclear fission
Design Concept and Development of a Heavy-Duty Truck Diesel Engine for Better Fuel Economy
J. Eng. Power. July 1983, 105(3): 690–696.
doi: https://doi.org/10.1115/1.3227470
Topics:
Corporate average fuel economy
,
Design
,
Diesel engines
,
Fuel efficiency
,
Trucks
,
Engines
,
Fuels
,
Torque
,
Brakes
,
Combustion
Some Aspects of Constant Pressure Turbocharged Marine Diesel Engines of Medium and Low Speed
J. Eng. Power. July 1983, 105(3): 697–711.
doi: https://doi.org/10.1115/1.3227471
Topics:
Diesel engines
,
Pressure
,
Thermal efficiency
,
Unsteady flow
,
Differential equations
,
Engines
,
Exhaust systems
,
Fluctuations (Physics)
,
Resonance
,
Simulation
Discussions
Discussion: “An Improved Time-Marching Method for Turbomachinery Flow Calculation” (Denton, J. D., 1983, ASME J. Eng. Power, 105, pp. 514–521)
J. Eng. Power. July 1983, 105(3): 521–523.
doi: https://doi.org/10.1115/1.3227445
Topics:
Flow (Dynamics)
,
Turbomachinery
Closure to “Discussion of ‘An Improved Time-Marching Method for Turbomachinery Flow Calculation’” (1983, ASME J. Eng. Power, 105, pp. 521–523)
J. Eng. Power. July 1983, 105(3): 523–524.
doi: https://doi.org/10.1115/1.3227446
Topics:
Flow (Dynamics)
,
Turbomachinery
Discussion: “Closed-Form, Steady-State Solution for the Unbalance Response of a Rigid Rotor in Squeeze Film Damper” (Taylor, D. L., and Kumar, B. R. K., 1983, ASME J. Eng. Power, 105, pp. 551–556)
J. Eng. Power. July 1983, 105(3): 556–558.
doi: https://doi.org/10.1115/1.3227452
Topics:
Dampers
,
Rotors
,
Steady state
Closure to “Discussion of ‘Closed-Form, Steady-State Solution for the Unbalance Response of a Rigid Rotor in Squeeze Film Damper’” (1983, ASME J. Eng. Power, 105, pp. 556–558)
J. Eng. Power. July 1983, 105(3): 558–559.
doi: https://doi.org/10.1115/1.3227453
Topics:
Rotors
,
Steady state
Email alerts
RSS Feeds
DGEN Aeropropulsion Research Turbofan Core/Combustor-Noise Measurements—Source Separation
J. Eng. Gas Turbines Power (October 2025)
Improving the Predictive Capability of Empirical Heat Transfer Correlations for Hydrogen Internal Combustion Engines
J. Eng. Gas Turbines Power (October 2025)
The Hybrid Pathway to Flexible Power Turbines: Part IV, Automated Construction of Mesh Derived Thermal Network Models for Fast Full-Machine Thermal Analysis
J. Eng. Gas Turbines Power (October 2025)