In this paper we use experimental measurements to characterize the extent that improved the external aerodynamic performance (reduced total pressure loss, increased flow quality) of a gas-turbine combustion system may be achieved by adopting an integrated OGV/prediffuser technique. Two OGV/prediffuser combinations were tested. The first is a datum design corresponding to a conventional design approach, where the OGV and prediffuser are essentially designed in isolation. The second is an “integrated” design where the OGV blade shape has been modified, following recommendations of earlier CFD work (Final Report No. TT03R01, 2003), to produce a secondary flow/wake structure that allows the prediffuser to operate at a higher area ratio without boundary layer separation. This is demonstrated to increase static pressure recovery and reduce dump losses. Experimental measurements are presented on a fully annular rig. Several traverse planes are used to gather five-hole probe data that allow the flow structure through the OGV, at the inlet and exit of the prediffuser, and in the inner/outer annulus supply ducts to be examined. Both overall performance measures (loss coefficients) and measures of flow uniformity and quality are used to demonstrate that the integrated design is superior.
Skip Nav Destination
e-mail: a.d.walker@lboro.ac.uk
Article navigation
January 2007
Technical Papers
Enhanced External Aerodynamic Performance of a Generic Combustor Using An Integrated OGV/Prediffuser Design Technique
A. Duncan Walker,
A. Duncan Walker
Dept. of Aero. and Auto. Engineering,
e-mail: a.d.walker@lboro.ac.uk
Loughborough University Loughborough
, LE11 3TU, United Kingdom
Search for other works by this author on:
Jon F. Carrotte,
Jon F. Carrotte
Dept. of Aero. and Auto. Engineering,
Loughborough University Loughborough
, LE11 3TU, United Kingdom
Search for other works by this author on:
James J. McGuirk
James J. McGuirk
Dept. of Aero. and Auto. Engineering,
Loughborough University Loughborough
, LE11 3TU, United Kingdom
Search for other works by this author on:
A. Duncan Walker
Dept. of Aero. and Auto. Engineering,
Loughborough University Loughborough
, LE11 3TU, United Kingdome-mail: a.d.walker@lboro.ac.uk
Jon F. Carrotte
Dept. of Aero. and Auto. Engineering,
Loughborough University Loughborough
, LE11 3TU, United Kingdom
James J. McGuirk
Dept. of Aero. and Auto. Engineering,
Loughborough University Loughborough
, LE11 3TU, United KingdomJ. Eng. Gas Turbines Power. Jan 2007, 129(1): 80-87 (8 pages)
Published Online: February 1, 2006
Article history
Received:
October 1, 2005
Revised:
February 1, 2006
Citation
Duncan Walker, A., Carrotte, J. F., and McGuirk, J. J. (February 1, 2006). "Enhanced External Aerodynamic Performance of a Generic Combustor Using An Integrated OGV/Prediffuser Design Technique." ASME. J. Eng. Gas Turbines Power. January 2007; 129(1): 80–87. https://doi.org/10.1115/1.2364008
Download citation file:
Get Email Alerts
Image-based flashback detection in a hydrogen-fired gas turbine using a convolutional autoencoder
J. Eng. Gas Turbines Power
Fuel Thermal Management and Injector Part Design for LPBF Manufacturing
J. Eng. Gas Turbines Power
An investigation of a multi-injector, premix/micromix burner burning pure methane to pure hydrogen
J. Eng. Gas Turbines Power
Related Articles
On the Physics of Heat Transfer and Aerodynamic Behavior of Separated
Flow Along a Highly Loaded Low Pressure Turbine Blade Under Periodic Unsteady
Wake Flow and Varying of Turbulence Intensity
J. Heat Transfer (May,2008)
Numerical Investigation of the Influence of Real World Blade Profile Variations on the Aerodynamic Performance of Transonic Nozzle Guide Vanes
J. Turbomach (March,2012)
Investigation of Vortex Shedding and Wake-Wake Interaction in a Transonic Turbine Stage Using Laser-Doppler-Velocimetry and Particle-Image-Velocimetry
J. Turbomach (January,2006)
Far-Field Boundary Condition Effects of CFD and Free-Wake Coupling Analysis for Helicopter Rotor
J. Fluids Eng (August,2010)
Related Proceedings Papers
Related Chapters
Boundary Layer Analysis
Centrifugal Compressors: A Strategy for Aerodynamic Design and Analysis
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Alternative Systems
Turbo/Supercharger Compressors and Turbines for Aircraft Propulsion in WWII: Theory, History and Practice—Guidance from the Past for Modern Engineers and Students