The flow and turbulence in an IC engine cylinder were studied using the SSG variant of the Reynolds stress turbulence closure model. In-cylinder turbulence is characterized by strong turbulence anisotropy and flow rotation, which aid in air-fuel mixing. It is argued that solving the differential transport equations for each turbulent stress tensor component, as implied by second-moment closures, can better reproduce stress anisotropy and effects of rotation, than with eddy-viscosity models. Therefore, a Reynolds stress model that can meet the demands of in-cylinder flows was incorporated into an engine flow solver. The solver and SSG turbulence model were first successfully tested with two different validation cases. Finally, simulations were applied to IC-engine like geometries. The results showed that the Reynolds stress model predicted additional flow structures and yielded less diffusive profiles than those predicted by an eddy-viscosity model. [S0742-4795(00)00101-0]
Skip Nav Destination
Article navigation
April 2000
Technical Papers
Second-Moment Closure Model for IC Engine Flow Simulation Using Kiva Code1
S. L. Yang,
S. L. Yang
Mechanical Engineering-Engineering Mechanics Department, Michigan Technological University, Houghton, MI 49931
Search for other works by this author on:
B. D. Peschke,
B. D. Peschke
Mechanical Engineering-Engineering Mechanics Department, Michigan Technological University, Houghton, MI 49931
Search for other works by this author on:
K. Hanjalic
K. Hanjalic
Faculty of Applied Science, Department of Applied Physics, Thermofluids Section, Delft University of Technology, The Netherlands
Search for other works by this author on:
S. L. Yang
Mechanical Engineering-Engineering Mechanics Department, Michigan Technological University, Houghton, MI 49931
B. D. Peschke
Mechanical Engineering-Engineering Mechanics Department, Michigan Technological University, Houghton, MI 49931
K. Hanjalic
Faculty of Applied Science, Department of Applied Physics, Thermofluids Section, Delft University of Technology, The Netherlands
Contributed by the Internal Combustion Engine Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Manuscript received by the Internal Combustion Engine Division June 1, 1999; final revision received by the ASME Headquarters August 31, 1999. Technical Editor: D. Assanis.
J. Eng. Gas Turbines Power. Apr 2000, 122(2): 355-363 (9 pages)
Published Online: August 31, 1999
Article history
Received:
June 1, 1999
Revised:
August 31, 1999
Citation
Yang , S. L., Peschke, B. D., and Hanjalic, K. (August 31, 1999). "Second-Moment Closure Model for IC Engine Flow Simulation Using Kiva Code." ASME. J. Eng. Gas Turbines Power. April 2000; 122(2): 355–363. https://doi.org/10.1115/1.483213
Download citation file:
Get Email Alerts
On Leakage Flows In A Liquid Hydrogen Multi-Stage Pump for Aircraft Engine Applications
J. Eng. Gas Turbines Power
A Computational Study of Temperature Driven Low Engine Order Forced Response In High Pressure Turbines
J. Eng. Gas Turbines Power
The Role of the Working Fluid and Non-Ideal Thermodynamic Effects on Performance of Gas Lubricated Bearings
J. Eng. Gas Turbines Power
Tool wear prediction in broaching based on tool geometry
J. Eng. Gas Turbines Power
Related Articles
Effect of Subgrid Modeling on the In-Cylinder Unsteady Mixing Process in a Direct Injection Engine
J. Eng. Gas Turbines Power (April,2003)
On Application of Nonlinear k-ε Models for Internal Combustion Engine Flows
J. Eng. Gas Turbines Power (July,2002)
Numerical Simulations of Turbulent Mixing and Autoignition of Hydrogen Fuel at Reheat Combustor Operating Conditions
J. Eng. Gas Turbines Power (April,2012)
Experimental Investigation to Study Convective Mixing, Spatial Uniformity, and Cycle-to-Cycle Variation During the Intake Stroke in an IC Engine
J. Eng. Gas Turbines Power (July,2000)
Related Proceedings Papers
Related Chapters
Physiology of Human Power Generation
Design of Human Powered Vehicles
Assessment of Flow Aggressiveness at an Ultrasonic Horn Cavitation Erosion Test Device by PVDF Pressure Measurements and 3D Flow Simulations
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Boundary Layer Analysis
Centrifugal Compressors: A Strategy for Aerodynamic Design and Analysis