Topics: Axial flow , Design , Optimization , Pareto optimization , Pressure , Ventilation , Blades , Flow (Dynamics) , Reynolds-averaged Navier–Stokes equations

Experimental Characterization of the Rotordynamic Forces on Space Rocket Axial Inducers

Lucio Torre, Angelo Pasini, Angelo Cervone, Luca d’Agostino

J. Fluids Eng. October 2011, 133(10): 101102. doi: https://doi.org/10.1115/1.4005100

Abstract

View articletitled, Experimental Characterization of the Rotordynamic Forces on Space Rocket Axial Inducers

Open the PDF for in another window

Topics: Cavitation , Dynamometers , Flow (Dynamics) , Impellers , Pumps , Rockets , Temperature , Test facilities , Whirls , Fluids

Fundamental Issues and Canonical Flows

Study of a Turbulent Dual Jet Consisting of a Wall Jet and an Offset Jet

Amitesh Kumar, Manab Kumar Das

J. Fluids Eng. October 2011, 133(10): 101201. doi: https://doi.org/10.1115/1.4004823

Abstract

View articletitled, Study of a Turbulent Dual Jet Consisting of a Wall Jet and an Offset Jet

Open the PDF for in another window

Topics: Flow (Dynamics) , Jets , Momentum , Pressure , Turbulence , Reynolds number , Stress , Kinetic energy , Energy dissipation

Optimum Cross Section Profile in Axisymmetric Stokes Flow

Deepak Kumar Srivastava

J. Fluids Eng. October 2011, 133(10): 101202. doi: https://doi.org/10.1115/1.4004912

Abstract

View articletitled, Optimum Cross Section Profile in Axisymmetric Stokes Flow

Open the PDF for in another window

Topics: Creeping flow , Drag (Fluid dynamics)

Flow Modifiers for Preventing Sedimentation in Heat Exchangers

Timo Kulju, Markus Riihimäki, Tiina M. Pääkkönen, Ossi Vilhunen, Kyösti Lipiäinen, Esa Muurinen, Riitta Keiski

J. Fluids Eng. October 2011, 133(10): 101203. doi: https://doi.org/10.1115/1.4004942

Abstract

View articletitled, Flow Modifiers for Preventing Sedimentation in Heat Exchangers

Open the PDF for in another window

Topics: Computational fluid dynamics , Flow (Dynamics) , Heat exchangers , Sedimentation , Shear stress , Simulation

Optical Density Measurements and Analysis for Single-Mode Initial-Condition Buoyancy-Driven Mixing

Y. Doron, A. Duggleby

J. Fluids Eng. October 2011, 133(10): 101204. doi: https://doi.org/10.1115/1.4004943

Abstract

View articletitled, Optical Density Measurements and Analysis for Single-Mode Initial-Condition Buoyancy-Driven Mixing

Open the PDF for in another window

Topics: Buoyancy , Density , Uncertainty , Water , Wavelength , Flow (Dynamics) , Turbulence

Theoretical Investigation of the Influence of Liquid Physical Properties on Effervescent Atomization Performance

Lijuan Qian, Jianzhong Lin, Hongbing Xiong, Tat Leung Chan

J. Fluids Eng. October 2011, 133(10): 101205. doi: https://doi.org/10.1115/1.4004256

Abstract

View articletitled, Theoretical Investigation of the Influence of Liquid Physical Properties on Effervescent Atomization Performance

Open the PDF for in another window

Topics: Drops , Surface tension , Sprays , Viscosity , Collisions (Physics)

Secondary Flow in Semi-Circular Ducts

I. A. S. Larsson, E. M. Lindmark, T. S. Lundström, G. J. Nathan

J. Fluids Eng. October 2011, 133(10): 101206. doi: https://doi.org/10.1115/1.4004991

Abstract

View articletitled, Secondary Flow in Semi-Circular Ducts

Open the PDF for in another window

Topics: Ducts , Flow (Dynamics) , Turbulence , Simulation , Computational fluid dynamics

Analysis of Forced Convection in a Circular Tube Filled With a Darcy–Brinkman–Forchheimer Porous Medium Using Spectral Homotopy Analysis Method

Seyed Moein Rassoulinejad-Mousavi, Saeid Abbasbandy

J. Fluids Eng. October 2011, 133(10): 101207. doi: https://doi.org/10.1115/1.4004998

Abstract

View articletitled, Analysis of Forced Convection in a Circular Tube Filled With a Darcy–Brinkman–Forchheimer Porous Medium Using Spectral Homotopy Analysis Method

Open the PDF for in another window

Topics: Flow (Dynamics) , Forced convection , Porous materials , Viscosity , Heat transfer , Friction

A Theoretical Description of a Dilute Emulsion of Very Viscous Drops Undergoing Unsteady Simple Shear

T. F. Oliveira, F.R. Cunha

J. Fluids Eng. October 2011, 133(10): 101208. doi: https://doi.org/10.1115/1.4005102

Abstract

View articletitled, A Theoretical Description of a Dilute Emulsion of Very Viscous Drops Undergoing Unsteady Simple Shear

Open the PDF for in another window

Topics: Deformation , Emulsions , Flow (Dynamics) , Rheology , Shapes , Shear (Mechanics) , Shear flow , Viscosity , Viscoelasticity

Multiphase Flows

Enhancing the Aggressive Intensity of a Cavitating Jet by Means of the Nozzle Outlet Geometry

H. Soyama

J. Fluids Eng. October 2011, 133(10): 101301. doi: https://doi.org/10.1115/1.4004905

Abstract

View articletitled, Enhancing the Aggressive Intensity of a Cavitating Jet by Means of the Nozzle Outlet Geometry

Open the PDF for in another window

Topics: Cavitation , Erosion , Geometry , Nozzles , Pressure

Studies of Swirl Burner Characteristics, Flame Lengths and Relative Pressure Amplitudes

A. Valera-Medina, N. Syred, P. Bowen, A. Crayford

J. Fluids Eng. October 2011, 133(10): 101302. doi: https://doi.org/10.1115/1.4004908

Abstract

View articletitled, Studies of Swirl Burner Characteristics, Flame Lengths and Relative Pressure Amplitudes

Open the PDF for in another window

Topics: Combustion , Ejectors , Flames , Pressure , Fluctuations (Physics) , Fuels , Flow (Dynamics)

Experimental Investigation of Time-Frequency Characteristics of Pressure Fluctuations in a Double-Suction Centrifugal Pump

Zhifeng Yao, Fujun Wang, Lixia Qu, Ruofu Xiao, Chenglian He, Min Wang

J. Fluids Eng. October 2011, 133(10): 101303. doi: https://doi.org/10.1115/1.4004959

Abstract

View articletitled, Experimental Investigation of Time-Frequency Characteristics of Pressure Fluctuations in a Double-Suction Centrifugal Pump

Open the PDF for in another window

Topics: Flow (Dynamics) , Fluctuations (Physics) , Pressure , Suction , Centrifugal pumps , Pumps , Impellers , Blades

Technical Briefs

Numerical Simulation of Polymer Injection in Turbulent Flow Past a Circular Cylinder

David Richter, Eric S. G. Shaqfeh, Gianluca Iaccarino

J. Fluids Eng. October 2011, 133(10): 104501. doi: https://doi.org/10.1115/1.4004960

Abstract

View articletitled, Numerical Simulation of Polymer Injection in Turbulent Flow Past a Circular Cylinder

Open the PDF for in another window

Topics: Circular cylinders , Flow (Dynamics) , Polymers , Turbulence , Wakes , Reynolds number , Vortices , Computer simulation , Shear (Mechanics) , Numerical analysis

Errata

Erratum: “Friction factor directly from transitional roughness in a turbulent pipe flow” [ASME Trans. J. Fluid Eng., 2007, 129, pp. 1255–1267]

Noor Afzal

J. Fluids Eng. October 2011, 133(10): 107001. doi: https://doi.org/10.1115/1.4004961

Extract

View articletitled, Erratum: “Friction factor directly from transitional roughness in a turbulent pipe flow” [<span class="related-article">ASME Trans. J. Fluid Eng., 2007, 129, pp. 1255–1267</span>]

Open the PDF for in another window

Topics: Fluids , Friction , Pipe flow , Surface roughness , Turbulence

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Erratum: “Passively Enhanced Vortex-Induced Vibration Response of Side-by-Side Cylinders in Turbulent Flow” [ASME J. Fluids Eng., 2024, 146(7), p. 070903; DOI: 10.1115/1.4065302]

J. Fluids Eng (December 2024)

Computational aeroacoustics of low-pressure axial fans installed in parallel

J. Fluids Eng

Three-dimensional simulation of cavitating flow in reciprocating positive displacement pumps with fluid-actuated valves

J. Fluids Eng

On Using the Distributor as a Multi Degree-of-Freedom System to Mitigate the Pressure Pulsation in an Axial Turbine at Speed-No-Load

J. Fluids Eng (February 2025)

Unified, Integral Approach to Modeling and Design of High-Pressure Pipelines: Assessment of Various Flow and Temperature Models for Supercritical Fluids

J. Fluids Eng (February 2025)

Research Papers

Flows in Complex Systems

Axial-Flow Ventilation Fan Design Through Multi-Objective Optimization to Enhance Aerodynamic Performance

Experimental Characterization of the Rotordynamic Forces on Space Rocket Axial Inducers

Fundamental Issues and Canonical Flows

Study of a Turbulent Dual Jet Consisting of a Wall Jet and an Offset Jet

Optimum Cross Section Profile in Axisymmetric Stokes Flow

Flow Modifiers for Preventing Sedimentation in Heat Exchangers

Optical Density Measurements and Analysis for Single-Mode Initial-Condition Buoyancy-Driven Mixing

Theoretical Investigation of the Influence of Liquid Physical Properties on Effervescent Atomization Performance

Secondary Flow in Semi-Circular Ducts

Analysis of Forced Convection in a Circular Tube Filled With a Darcy–Brinkman–Forchheimer Porous Medium Using Spectral Homotopy Analysis Method

A Theoretical Description of a Dilute Emulsion of Very Viscous Drops Undergoing Unsteady Simple Shear

Multiphase Flows

Enhancing the Aggressive Intensity of a Cavitating Jet by Means of the Nozzle Outlet Geometry

Studies of Swirl Burner Characteristics, Flame Lengths and Relative Pressure Amplitudes

Experimental Investigation of Time-Frequency Characteristics of Pressure Fluctuations in a Double-Suction Centrifugal Pump

Technical Briefs

Numerical Simulation of Polymer Injection in Turbulent Flow Past a Circular Cylinder

Errata

Erratum: “Friction factor directly from transitional roughness in a turbulent pipe flow” [ASME Trans. J. Fluid Eng., 2007, 129, pp. 1255–1267]

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Flows in Complex Systems

Fundamental Issues and Canonical Flows

Multiphase Flows

Technical Briefs

Errata

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only