Surface roughness is present in most of the microfluidic devices due to the microfabrication techniques or particle adhesion. It is highly desirable to understand the roughness effect on microscale flow. In this study, we developed a three-dimensional finite-volume-based numerical model to simulate pressure-driven liquid flow in microchannels with rectangular prism rough elements on the surfaces. Both symmetrical and asymmetric roughness element arrangements were considered, and the influence of the roughness on pressure drop was examined. The three-dimensional numerical solution shows significant effects of surface roughness in terms of the rough elements’ height, size, spacing, and the channel height on both the velocity distribution and the pressure drop. The compression-expansion flow around the three-dimensional roughness elements and the flow blockage caused by the roughness in the microchannel were discussed. An expression of the relative channel height reduction due to roughness effect was presented.

Issue Section:
Technical Papers
Keywords:
channel flow, rough surfaces, microfluidics, velocity
Topics:
Flow (Dynamics), Microchannels, Surface roughness, Pressure, Symmetry (Physics)
1.
Mala
,
G. M.
, and
Li
,
D.
,
1999
, “
Flow Characteristics of Water in Microtubes
,”
Int. J. Heat Fluid Flow
,
20
, pp.
142
–
148
.
2.
Qu
,
W.
,
Mala
,
G. M.
, and
Li
,
D.
,
2000
, “
Pressure-Driven Water Flows in Trapezoidal Silicon Microchannels
,”
Int. J. Heat Mass Transfer
,
43
, pp.
353
–
364
.
3.
Qu
,
W.
,
Mala
,
G. M.
, and
Li
,
D.
,
2000
, “
Heat Transfer for Water Flow in Trapezoidal Silicon Microchannels
,”
Int. J. Heat Mass Transfer
,
43
, pp.
3925
–
3936
.
4.
Incropera, F. P., and DeWitt, D. P., 1996, Introduction to Heat Transfer, John Wiley and Sons, New York.
5.
Arulanandam
,
S.
, and
Li
,
D.
,
2000
, “
Liquid Transport in Rectangular Microchannels by Electroosmotic Pumping
,”
Colloids Surf., A
,
161
, pp.
89
–
102
.
6.
Yang
,
C.
, and
Li
,
D.
,
1998
, “
Analysis of Electrokinetic Effects on the Liquid Flow in Rectangular Microchannels
,”
Colloids Surf., A
,
143
, pp.
339
–
353
.
7.
Currie, I. G., 1993, Fundamental Mechanics of Fluids, McGraw-Hill, New York.
8.
Sparrow
,
E. M.
,
Niethammer
,
J. E.
, and
Chaboki
,
A.
,
1982
, “
Heat Transfer and Pressure Drop Characteristics of Arrays of Rectangular Modules Encountered in Electronic Equipment
,”
Int. J. Heat Mass Transfer
,
25
, pp.
961
–
973
.
9.
Jubran
,
B. A.
,
Swiety
,
S. A.
, and
Hamdan
,
M. A.
,
1996
, “
Convective Heat Transfer and Pressure Drop Characteristics of Various Array Configurations to Simulate the Cooling of Electronic Modules
,”
Int. J. Heat Mass Transfer
,
39
, pp.
3519
–
3529
.
10.
Patankar
,
S. V.
,
Liu
,
C. H.
, and
Sparrow
,
E. M.
,
1977
, “
Fully Developed Flow and Heat Transfer in Ducts Having Streamwise-Periodic Variations of Cross-Sectional Area
,”
ASME J. Heat Transfer
,
99
, pp.
180
–
186
.
11.
Amano
,
R. S.
,
1985
, “
A Numerical Study of Laminar and Turbulent Heat Transfer in a Periodically Corrugated Wall Channel
,”
ASME J. Heat Transfer
,
107
, pp.
564
–
569
.
12.
Patankar, S. V., 1980, Numerical Heat Transfer and Fluid Flow, Hemisphere, New York.
13.
Chou
,
H.-P.
,
Spence
,
C.
,
Schere
,
A.
, and
Quake
,
S.
,
1999
, “
A Microfabricated Device for Sizing and Sorting DNA Molecules
,”
Proc. Natl. Acad. Sci. U.S.A.
,
96
, pp.
11
–
13
.
Copyright © 2003
 by ASME
You do not currently have access to this content.