An experimental study was undertaken to investigate the characteristics of turbulent boundary layers developing on smooth flat plate in an open channel flow at moderately high Froude numbers (0.25<Fr<1.1) and low momentum thickness Reynolds numbers The low range of Reynolds numbers and the high Froude number range make the study important, as most other studies of this type have been conducted at high Reynolds numbers and lower Froude numbers (∼0.1). Velocity measurements were carried out using a laser-Doppler anemometer equipped with a beam expansion device to enable measurements close to the wall region. The shear velocities were computed using the near-wall measurements in the viscous subregion. The variables of interest include the longitudinal mean velocity, the turbulence intensity, and the velocity skewness and flatness distributions across the boundary layer. The applicability of a constant Coles’ wake parameter (Π=0.55) to open channel flows has been discounted. The effect of the Froude number on the above parameters was also examined.
Skip Nav Destination
Article navigation
June 2001
Technical Papers
A Study on Turbulent Boundary Layers on a Smooth Flat Plate in an Open Channel
Ram Balachandar, Professor,
Ram Balachandar, Professor
Department of Civil Engineering, Fluid Engineering Laboratory, College of Engineering, University of Saskatchewan, Saskatoon, Canada
Search for other works by this author on:
D. Blakely, Graduate Student,
D. Blakely, Graduate Student
Department of Civil Engineering, Fluid Engineering Laboratory, College of Engineering, University of Saskatchewan, Saskatoon, Canada
Search for other works by this author on:
M. Tachie, Graduate Student,
M. Tachie, Graduate Student
Department of Civil Engineering, Fluid Engineering Laboratory, College of Engineering, University of Saskatchewan, Saskatoon, Canada
Search for other works by this author on:
G. Putz, Associate Professor
G. Putz, Associate Professor
Department of Civil Engineering, Fluid Engineering Laboratory, College of Engineering, University of Saskatchewan, Saskatoon, Canada
Search for other works by this author on:
Ram Balachandar, Professor
Department of Civil Engineering, Fluid Engineering Laboratory, College of Engineering, University of Saskatchewan, Saskatoon, Canada
D. Blakely, Graduate Student
Department of Civil Engineering, Fluid Engineering Laboratory, College of Engineering, University of Saskatchewan, Saskatoon, Canada
M. Tachie, Graduate Student
Department of Civil Engineering, Fluid Engineering Laboratory, College of Engineering, University of Saskatchewan, Saskatoon, Canada
G. Putz, Associate Professor
Department of Civil Engineering, Fluid Engineering Laboratory, College of Engineering, University of Saskatchewan, Saskatoon, Canada
Contributed by the Fluids Engineering Division for publication in the JOURNAL OF FLUIDS ENGINEERING. Manuscript received by the Fluids Engineering Division March 1, 2000; revised manuscript received January 29, 2001. Associate Editor: D. R. Williams.
J. Fluids Eng. Jun 2001, 123(2): 394-400 (7 pages)
Published Online: January 29, 2001
Article history
Received:
March 1, 2000
Revised:
January 29, 2001
Citation
Balachandar, R., Blakely, D., Tachie, M., and Putz, G. (January 29, 2001). "A Study on Turbulent Boundary Layers on a Smooth Flat Plate in an Open Channel ." ASME. J. Fluids Eng. June 2001; 123(2): 394–400. https://doi.org/10.1115/1.1366321
Download citation file:
Get Email Alerts
Related Articles
Rough Wall Turbulent Boundary Layers in Shallow Open Channel Flow
J. Fluids Eng (September,2000)
Open Channel Boundary Layer Relaxation Behind a Forward Facing Step at Low Reynolds Numbers
J. Fluids Eng (September,2001)
Skin Friction Correlation in Open Channel Boundary Layers
J. Fluids Eng (December,2001)
An Integral Solution for Heat Transfer in Accelerating Turbulent Boundary Layers
J. Heat Transfer (November,2009)
Related Proceedings Papers
Related Chapters
Cavitating Structures at Inception in Turbulent Shear Flow
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Fluidelastic Instability of Tube Bundles in Single-Phase Flow
Flow-Induced Vibration Handbook for Nuclear and Process Equipment
Random Turbulence Excitation in Single-Phase Flow
Flow-Induced Vibration Handbook for Nuclear and Process Equipment