Dedicated fan-duct-heatsink combinations have become a standard means of cooling computer processors. Most previous studies have considered optimization of fin geometry (pitch and thickness) with overall heatsink dimensions (width, height, length) fixed. The present study considers size requirements for the constraints of fixed air volume flow rate and pressure drop, fixed fan/blower power, and fixed thermal conductance. First, an ideal heatsink with infinite fin thermal conductivity is considered, providing simple power-law prediction of performance. Next, fins of finite thermal conductivity and thickness, as well as effects of developing flow are included in the analysis, permitting prediction and minimization of weight. Models of both levels of complexity can be used, previous to more detailed numerical and/or experimental studies, to design optimized heatsinks.

Issue Section:
Technical Papers
Keywords:
heat sinks, packaging, cooling, thermal conductivity, pipe flow, forced convection
Topics:
Flow (Dynamics), Thermal conductivity, Pressure drop, Dimensions, Fins, Cooling
1.
Knight
,
R. W.
,
Goodling
,
J. S.
, and
Hall
,
D. J.
,
1991
, “
Optimum Design of Forced Convection Heat Sinks—Analytical
,”
ASME J. Electronic Packag.
,
113
(
3
), pp.
313
–
321
.
2.
Azar, K., McLeod, R. S., and Caron, R. E., 1992, “Narrow Channel Heat Sink for Cooling of High Powered Electronic Components,” Proc Eighth Annual IEEE Semiconductor Thermal Measurement and Management Symposium, pp. 12–19.
3.
Lee
,
S.
,
1995
, “
Optimum Design and Selection of Heat Sinks
,”
IEEE Trans., Components, Packaging and Manufacturing Technology—Part A
,
18
, No.
4
, pp.
812
–
817
.
4.
Biber, C. R., and Fijol, S., 1999, Fan—plus—Heatsink “Optimization”—Mechanical and Thermal Design with Reality, Proc Int Systems Packaging Symposium, pp. 12–19.
5.
Teertstra, P., Yovanovich, M. M., Culham, J. R., and Lemczyk, T., 1999, “Analytical Forced Convection Modeling of Plate Fin Heat Sinks,” Proc., Fifteenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium, pp. 34–41.
6.
dos Reis, E., and Altemani, C. A. C., 1999, “Design of Heat Sinks and Planar Spreaders with Airflow Bypass, ASME EEP-Vol. 26-1,” Advances in Electronic Packaging—1999, pp. 477–484.
7.
Copeland, D., 2000, “Optimization of Parallel Plate Heatsinks for Forced Convection,” Proc., Sixteenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium, pp. 266–272.
8.
Iyengar, M., and Bar-Cohen, A., 2000, “Design for Manufacturability of SISE Parallel Plate Forced Convection Heat Sinks,” Proc., Seventh Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, pp. 141–148.
9.
de Kock, D. J., and Visser, J. A., “Optimal Heat Sink Design Using Mathematical Optimization,” Proceedings of The Pacific Rim/International Intersociety Electronic Packaging Conference, IPACK2001-15599
Copyright © 2003
 by ASME
You do not currently have access to this content.