A 3D, single phase steady-state model has been developed for liquid feed direct methanol fuel cell. The model is implemented into the commercial computational fluid dynamics (CFD) software package FLUENT® v6.2, with its user-defined functions (UDFs). The continuity, momentum, and species conservation equations are coupled with electrochemical kinetics in the anode and cathode channel and MEA. For electro chemical kinetics, the Tafel equation is used at both the anode and cathode sides. Results are validated against DMFC experimental data with reasonable agreement and used to study the effects of cell temperature, channel depth, and channel width on polarization curve, power density and crossover rate. The results show that the increasing operational temperature, the limiting current density and peak of power density increase and subsequently crossover increases too. It is also shown that the increasing of channel width is a beneficial way for improving cell performance at a methanol concentration below 1 M.
Skip Nav Destination
e-mail: mfarhadi@nit.ac.ir
e-mail: ksedighi@nit.ac.ir
Article navigation
December 2011
This article was originally published in
Journal of Fuel Cell Science and Technology
Research Papers
The Effect of Cell Temperature and Channel Geometry on the Performance of a Direct Methanol Fuel Cell
Mousa Farhadi,
Mousa Farhadi
Faculty of Mechanical Engineering,
e-mail: mfarhadi@nit.ac.ir
Babol University of Technology
, P.O. Box 484, Babol, Iran
4714871167
Search for other works by this author on:
Kurosh Sedighi
Kurosh Sedighi
Faculty of Mechanical Engineering,
e-mail: ksedighi@nit.ac.ir
Babol University of Technology
, P.O. Box 484, Babol, Iran
4714871167
Search for other works by this author on:
Mousa Farhadi
Faculty of Mechanical Engineering,
Babol University of Technology
, P.O. Box 484, Babol, Iran
4714871167e-mail: mfarhadi@nit.ac.ir
Kurosh Sedighi
Faculty of Mechanical Engineering,
Babol University of Technology
, P.O. Box 484, Babol, Iran
4714871167e-mail: ksedighi@nit.ac.ir
J. Fuel Cell Sci. Technol. Dec 2011, 8(6): 061004 (8 pages)
Published Online: September 26, 2011
Article history
Received:
October 20, 2010
Accepted:
July 13, 2011
Online:
September 26, 2011
Published:
September 26, 2011
Citation
Parvizi Omran, M., Farhadi, M., and Sedighi, K. (September 26, 2011). "The Effect of Cell Temperature and Channel Geometry on the Performance of a Direct Methanol Fuel Cell." ASME. J. Fuel Cell Sci. Technol. December 2011; 8(6): 061004. https://doi.org/10.1115/1.4004640
Download citation file:
Get Email Alerts
Cited By
Editor's Farewell
J. Electrochem. En. Conv. Stor (November 2024)
State of Health Estimation for Lithium-Ion Batteries Based on Multi-Scale Frequency Feature and Time-Domain Feature Fusion Method
J. Electrochem. En. Conv. Stor (May 2025)
Online Capacity Estimation for Lithium-Ion Batteries in Partial Intervals Considering Charging Conditions
J. Electrochem. En. Conv. Stor (August 2025)
Thermal Management and Optimization of Automotive Film Capacitors Based on Parallel Microchannel Cooling Plates
J. Electrochem. En. Conv. Stor (August 2025)
Related Articles
Three-Dimensional Simulation-Based Optimum Design of Direct Methanol Fuel Cell System
J. Fuel Cell Sci. Technol (April,2013)
Modeling of a Three-Dimensional Single-Phase Direct Methanol Fuel Cell
J. Electrochem. En. Conv. Stor (February,2017)
Quantifying Individual Losses in a Direct Methanol Fuel Cell
J. Fuel Cell Sci. Technol (February,2012)
Optimization of Mesh-Based Anodes for Direct Methanol Fuel Cells
J. Fuel Cell Sci. Technol (June,2010)
Related Proceedings Papers
Related Chapters
Effects of Metallic Plate and Objects on Performance of Inverted F Antenna for ISM Band Application
International Conference on Computer and Automation Engineering, 4th (ICCAE 2012)
Mathematical Background
Vibrations of Linear Piezostructures
Joint Polarization Information for Fast Multi-Target Localization in Bistatic MIMO Radar System
International Symposium on Information Engineering and Electronic Commerce, 3rd (IEEC 2011)