A model following adaptive sliding mode tracking control (MFASMTC) with the adjustable control gain based on a disturbance observer (DOB) for the mechanical system is proposed in this paper. The control gains of the proposed controller are automatically adjusted to compensate the unknown time-varying disturbances by the DOB. First, the unknown variables and uncertainties are lumped as the disturbance terms and the system dynamic model consist of the nominal matrix and disturbances vector. The desired model and sliding mode controller (SMC) are integrated by using the Lyapunov function candidate to obtain the general model following sliding mode tracking control (MFSMTC) with the fixed control gain. To stabilize and compensate the unknown time-varying disturbances for the control system, a DOB is combined with the MFSMTC to obtain the MFASMTC to automatically adjust the control gains. The mass-spring-damper system and two-link manipulator robot system are both used as examples system to demonstrate the proposed control scheme, respectively. The comparisons between MFSMTC with the fixed control gain and MFASMTC with the adjustable control gain based on a DOB are performed in this paper. From the simulation results, the proposed MFASMTC with the adjustable control gain based on a DOB demonstrates the stable and robust control performance for the unknown uncertainties and external disturbances. The proposed control method also can be applied to the other mechanical systems with the desired model to find the desired model following adaptive sliding mode tracking control.
Skip Nav Destination
Article navigation
Research-Article
Model Following Adaptive Sliding Mode Tracking Control Based on a Disturbance Observer for the Mechanical Systems
Kun-Yung Chen
Kun-Yung Chen
Department of Mechanical Engineering,
Air Force Institute of Technology,
No. 198, Jieshou W. Road,
Gangshan District,
Kaohsiung 820, Taiwan
e-mail: u9615906@nkfust.edu.tw
Air Force Institute of Technology,
No. 198, Jieshou W. Road,
Gangshan District,
Kaohsiung 820, Taiwan
e-mail: u9615906@nkfust.edu.tw
Search for other works by this author on:
Kun-Yung Chen
Department of Mechanical Engineering,
Air Force Institute of Technology,
No. 198, Jieshou W. Road,
Gangshan District,
Kaohsiung 820, Taiwan
e-mail: u9615906@nkfust.edu.tw
Air Force Institute of Technology,
No. 198, Jieshou W. Road,
Gangshan District,
Kaohsiung 820, Taiwan
e-mail: u9615906@nkfust.edu.tw
Contributed by the Dynamic Systems Division of ASME for publication in the JOURNAL OF DYNAMIC SYSTEMS, MEASUREMENT, AND CONTROL. Manuscript received May 7, 2017; final manuscript received October 1, 2017; published online December 19, 2017. Assoc. Editor: Hashem Ashrafiuon.
J. Dyn. Sys., Meas., Control. May 2018, 140(5): 051012 (15 pages)
Published Online: December 19, 2017
Article history
Received:
May 7, 2017
Revised:
October 1, 2017
Citation
Chen, K. (December 19, 2017). "Model Following Adaptive Sliding Mode Tracking Control Based on a Disturbance Observer for the Mechanical Systems." ASME. J. Dyn. Sys., Meas., Control. May 2018; 140(5): 051012. https://doi.org/10.1115/1.4038165
Download citation file:
Get Email Alerts
Cited By
Offline and online exergy-based strategies for hybrid electric vehicles
J. Dyn. Sys., Meas., Control
Optimal Control of a Roll-to-Roll Dry Transfer Process With Bounded Dynamics Convexification
J. Dyn. Sys., Meas., Control (May 2025)
In-Situ Calibration of Six-Axis Force/Torque Transducers on a Six-Legged Robot
J. Dyn. Sys., Meas., Control (May 2025)
Active Data-enabled Robot Learning of Elastic Workpiece Interactions
J. Dyn. Sys., Meas., Control
Related Articles
A New Model-Based Control Structure for Position Tracking in an Electro-Hydraulic Servo System With Acceleration Constraint
J. Dyn. Sys., Meas., Control (December,2017)
Nonlinear Robust Output Stabilization for Mechanical Systems Based on Luenberger-Like Controller/Observer
J. Dyn. Sys., Meas., Control (August,2017)
A Note on Observer-Based Frequency Control for a Class of Systems Described by Uncertain Models
J. Dyn. Sys., Meas., Control (February,2018)
Path Following and Shape Morphing With a Continuous Slender Mechanism
J. Dyn. Sys., Meas., Control (October,2015)
Related Proceedings Papers
Related Chapters
Fault-Tolerant Control of Sensors and Actuators Applied to Wind Energy Systems
Electrical and Mechanical Fault Diagnosis in Wind Energy Conversion Systems
An Adaptive Fuzzy Control for a Multi-Degree-of-Freedom System
Intelligent Engineering Systems Through Artificial Neural Networks, Volume 17
Spiking Neural Networks on Self-Updating System-on-Chip for Autonomous Control
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)