Hot rolling mills suffer from severe torsional vibrations in particular working conditions (thin thickness). These vibrations are often explained as the result of an exogenous disturbance amplified by a resonance effect. In this paper, we show that these vibrations are in fact produced by the interaction between the kinematic chain and the phenomenon of the plastic deformation of the strip occurring in the roll bite. Precisely, the vibrations are the expression of an unstable limit cycle due to the combination of the dynamics associated with these two effects. Starting from this key observation, the vibration attenuation control problem is studied. First of all, by investigating the observability and controllability properties, it can be seen that there is a basic controllability problem in the standard configuration of the plant. To circumvent it, it is proposed to modify some mechanical characteristics so as to ensure the system controllability. Then a suitable active control system based on frequency domain concepts can be designed. The proposed control system neutralizes the torsional vibration, and therefore it allows one to preserve the system integrity while increasing plant efficiency and productivity.
Skip Nav Destination
e-mail: bittanti@elet.polimi.it
Article navigation
December 2004
Article
On the Origin of Torsional Vibrations in Hot Rolling Mills and a Possible Remedy
P. Belli,
P. Belli
ABB, Via L. Lama 33, 20099 Sesto S. Giovanni (Mi), Italy
Search for other works by this author on:
S. Bittanti,
e-mail: bittanti@elet.polimi.it
S. Bittanti
Politecnico di Milano, Dip. di Elettronica e Informazione, Piazza Leonardo da Vinci 32, 20133 Milano, Italy
Search for other works by this author on:
A. De Marco
A. De Marco
Politecnico di Milano, Dip. di Elettronica e Informazione, Piazza Leonardo da Vinci 32, 20133 Milano, Italy
Search for other works by this author on:
P. Belli
ABB, Via L. Lama 33, 20099 Sesto S. Giovanni (Mi), Italy
S. Bittanti
Politecnico di Milano, Dip. di Elettronica e Informazione, Piazza Leonardo da Vinci 32, 20133 Milano, Italy
e-mail: bittanti@elet.polimi.it
A. De Marco
Politecnico di Milano, Dip. di Elettronica e Informazione, Piazza Leonardo da Vinci 32, 20133 Milano, Italy
Contributed by the Dynamic Systems, Measurement, and Control Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF DYNAMIC SYSTEMS, MEASUREMENT, AND CONTROL. Manuscript received by the ASME Dynamic Systems and Control Division May 6, 2003; final revision, December 9, 2003. Review conducted by: H. Sardar.
J. Dyn. Sys., Meas., Control. Dec 2004, 126(4): 811-823 (13 pages)
Published Online: March 11, 2005
Article history
Received:
May 6, 2003
Revised:
December 9, 2003
Online:
March 11, 2005
Citation
Belli, P., Bittanti, S., and De Marco, A. (March 11, 2005). "On the Origin of Torsional Vibrations in Hot Rolling Mills and a Possible Remedy ." ASME. J. Dyn. Sys., Meas., Control. December 2004; 126(4): 811–823. https://doi.org/10.1115/1.1850531
Download citation file:
Get Email Alerts
Offline and Online Exergy-Based Strategies for Hybrid Electric Vehicles
J. Dyn. Sys., Meas., Control (May 2025)
Multi Combustor Turbine Engine Acceleration Process Control Law Design
J. Dyn. Sys., Meas., Control
A Distributed Layered Planning and Control Algorithm for Teams of Quadrupedal Robots: An Obstacle-Aware Nonlinear Model Predictive Control Approach
J. Dyn. Sys., Meas., Control (May 2025)
Active Data-Enabled Robot Learning of Elastic Workpiece Interactions
J. Dyn. Sys., Meas., Control (May 2025)
Related Articles
The Coefficient of Friction During Hot Rolling of Low Carbon Steel Strips
J. Tribol (October,2002)
Modeling the Rolling of Ribbed Strip by a 3D Rigid Viscoplastic FEM
J. Manuf. Sci. Eng (May,2005)
Vibration Instability in Rolling Mills: Modeling and Experimental Results
J. Vib. Acoust (April,2002)
Effects of Nonsymmetry in Strip Rolling on Single-Roll Drive Mills
J. Eng. Ind (November,1966)
Related Proceedings Papers
Related Chapters
Key Technology of Interactive Music Game Installation based on Arduino
International Conference on Control Engineering and Mechanical Design (CEMD 2017)
Transverse Free Vibration Analysis of Hybrid SPR Steel Joints
Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2010)
Basic Concepts
Design & Analysis of ASME Boiler and Pressure Vessel Components in the Creep Range