Abstract
The design and optimization of a nonlinear dynamic vibration absorber based on a snap-through truss geometry is investigated. The effect of absorber's parameters on primary system (PS) vibration amplitude reduction and frequency range of operation is analyzed. Within parametric analyses of the absorber, a methodology was proposed to tune the absorber's stiffness. Results show that the nonlinear vibration absorber may be substantially more effective than its linear counterpart both in terms of vibration amplitude reduction and absorption frequency range. Possible difficulties and/or limitations caused by the nonlinearity induced by the absorber are analyzed and, for the studied case, do not diminish the advantages of the nonlinear absorber (NLAbs). The effect of absorber's damping on the vibration reduction performance was also analyzed indicating that the NLAbs outperforms its linear counterpart even for higher damping levels.
Issue Section:
Research Papers
References
1.
Frahm
,
H.
, 1911
, “
Device for Damping Vibrations of Bodies
,” U.S. Patent No. US989958A, pp. 989
–958
.2.
Ormondroyd
,
J.
, and
Den Hartog
,
J. P.
, 1928
, “
The Theory of the Dynamical Vibration Absorber
,” ASME J. Appl. Mech.
,
50
(7
), pp. 9
–22
.3.
Roberson
,
R. E.
, 1952
, “
Synthesis of a Nonlinear Dynamic Vibration Absorber
,” J. Franklin Inst.
,
254
(3
), pp. 205
–220
.10.1016/0016-0032(52)90457-24.
Pipes
,
L. A.
, 1953
, “
Analysis of a Nonlinear Dynamic Vibration Absorber
,” ASME J. Appl. Mech.
,
20
, pp. 515
–518
.5.
Arnold
,
F. R.
, 1955
, “
Steady-State Behavior of Systems Provided With Nonlinear Dynamic Vibration Absorbers
,” ASME J. Appl. Mech.
,
22
, pp. 487
–492
.6.
Hunt
,
J. B.
, and
Nissen
,
J. C.
, 1982
, “
The Broadband Dynamic Vibration Absorber
,” J. Sound Vib.
,
83
(4
), pp. 573
–578
.10.1016/S0022-460X(82)80108-97.
Shaw
,
J.
,
Shaw
,
S. W.
, and
Haddow
,
A. G.
, 1989
, “
On the Response of the Non-Linear Vibration Absorber
,” Int. J. Non-Linear Mech.
,
24
(4
), pp. 281
–293
.10.1016/0020-7462(89)90046-28.
Pai
,
P. F.
, and
Schulz
,
M. J.
, 2000
, “
A Refined Nonlinear Vibration Absorber
,” Int. J. Mech. Sci.
,
42
(3
), pp. 537
–560
.10.1016/S0020-7403(98)00135-09.
Gendelman
,
O.
,
Manevitch
,
L. I.
,
Vakakis
,
A. F.
, and
Closkey
,
R. M.
, 2001
, “
Energy Pumping in Nonlinear Mechanical Oscillators—Part I: Dynamics of the Underlying Hamiltonian Systems
,” ASME J. Appl. Mech.
,
68
(1
), pp. 34
–41
.10.1115/1.134552410.
Vakakis
,
A. F.
, and
Gendelman
,
O.
, 2001
, “
Energy Pumping in Nonlinear Mechanical Oscillators—Part II: Resonance Capture
,” ASME J. Appl. Mech.
,
68
(1
), pp. 42
–48
.10.1115/1.134552511.
Detroux
,
T.
,
Habib
,
G.
,
Masset
,
L.
, and
Kerschen
,
G.
, 2015
, “
Performance, Robustness and Sensitivity Analysis of the Nonlinear Tuned Vibration Absorber
,” Mech. Syst. Signal Process.
,
60–61
, pp. 799
–809
.10.1016/j.ymssp.2015.01.03512.
Foroutan
,
K.
,
Jalali
,
A.
, and
Ahmadi
,
H.
, 2019
, “
Investigations of Energy Absorption Using Tuned Bistable Nonlinear Energy Sink With Local and Global Potentials
,” J. Sound Vib.
,
447
, pp. 155
–169
.10.1016/j.jsv.2019.01.03013.
Zang
,
J.
,
Zhang
,
Y.-W.
,
Ding
,
H.
,
Yang
,
T.-Z.
, and
Chen
,
L.-Q.
, 2019
, “
The Evaluation of a Nonlinear Energy Sink Absorber Based on the Transmissibility
,” Mech. Syst. Signal Process.
,
125
, pp. 99
–122
.10.1016/j.ymssp.2018.05.06114.
Viguie
,
R.
, and
Kerschen
,
G.
, 2009
, “
Nonlinear Vibration Absorber Coupled to a Nonlinear Primary System: A Tuning Methodology
,” J. Sound Vib.
,
326
(3–5
), pp. 780
–793
.10.1016/j.jsv.2009.05.02315.
Viguie
,
R.
, and
Kerschen
,
G.
, 2010
, “
On the Functional Form of a Nonlinear Vibration Absorber
,” J. Sound Vib.
,
329
(25
), pp. 5225
–5232
.10.1016/j.jsv.2010.07.00416.
Habib
,
G.
,
Detroux
,
T.
,
Viguie
,
R.
, and
Kerschen
,
G.
, 2015
, “
Nonlinear Generalization of Den Hartog's Equal-Peak Method
,” Mech. Syst. Signal Process.
,
52–53
, pp. 17
–28
.10.1016/j.ymssp.2014.08.00917.
Habib
,
G.
, and
Romeo
,
F.
, 2017
, “
The Tuned Bistable Nonlinear Energy Sink
,” Nonlinear Dyn.
,
89
(1
), pp. 179
–196
.10.1007/s11071-017-3444-y18.
Malher
,
A.
,
Touzé
,
C.
,
Doaré
,
O.
,
Habib
,
G.
, and
Kerschen
,
G.
, 2017
, “
Flutter Control of a Two-Degrees-of-Freedom Airfoil Using a Nonlinear Tuned Vibration Absorber
,” ASME J. Comput. Nonlinear Dyn.
,
12
(5
), p. 051016
.10.1115/1.403642019.
Sun
,
X.
,
Xu
,
J.
,
Wang
,
F.
, and
Cheng
,
L.
, 2019
, “
Design and Experiment of Nonlinear Absorber for Equal-Peak and De-Nonlinearity
,” J. Sound Vib.
,
449
, pp. 274
–299
.10.1016/j.jsv.2019.02.03320.
Premchand
,
V.
,
Narayanan
,
M.
, and
Sajith
,
A.
, 2019
, “
A New Cluster-Based Harmonic Balance Aided Optimization Procedure With Application to Nonlinear Vibration Absorbers
,” ASME J. Comput. Nonlinear Dyn.
,
14
(7
), p. 071007
.10.1115/1.404352721.
Tang
,
B.
,
Brennan
,
M.
,
Gatti
,
G.
, and
Ferguson
,
N.
, 2016
, “
Experimental Characterization of a Nonlinear Vibration Absorber Using Free Vibration
,” J. Sound Vib.
,
367
, pp. 159
–169
.10.1016/j.jsv.2015.12.04022.
Lavazec
,
D.
,
Cumunel
,
G.
,
Duhamel
,
D.
, and
Soize
,
C.
, 2019
, “
Experimental Evaluation and Model of a Nonlinear Absorber for Vibration Attenuation
,” Commun. Nonlinear Sci. Numer. Simul.
,
69
, pp. 386
–397
.10.1016/j.cnsns.2018.10.00923.
Avramov
,
K. V.
, and
Mikhlin
,
Y. V.
, 2004
, “
Forced Oscillations of a System, Containing a Snap-Through Truss, Close to Its Equilibrium Position
,” Nonlinear Dyn.
,
35
(4
), pp. 361
–379
.10.1023/B:NODY.0000027757.72648.b524.
Avramov
,
K. V.
, and
Mikhlin
,
Y. V.
, 2004
, “
Snap-Through Truss as a Vibration Absorber
,” J. Vib. Control
,
10
(2
), pp. 291
–308
.10.1177/107754630403560425.
Avramov
,
K. V.
, and
Mikhlin
,
Y. V.
, 2006
, “
Snap-Through Truss as an Absorber of Forced Oscillations
,” J. Sound Vib.
,
290
(3–5
), pp. 705
–722
.10.1016/j.jsv.2005.04.02226.
Avramov
,
K.
, and
Gendelman
,
O.
, 2009
, “
Interaction of Elastic System With Snap-Through Vibration Absorber
,” Int. J. Non-Linear Mech.
,
44
(1
), pp. 81
–89
.10.1016/j.ijnonlinmec.2008.09.00427.
Godoy
,
W. R. A.
,
Balthazar
,
J. M.
,
Pontes
,
B. R.
, and
Felix
,
J. L. P.
, 2012
, “
Using of a Snap-Through Truss Absorber in the Attenuation of the Sommerfeld Effect
,” MATEC Web Conf.
,
1
, p. 08002
.10.1051/matecconf/2012010800228.
Godoy
,
W. R. A.
,
Balthazar
,
J. M.
,
Pontes
,
B. R.
,
Felix
,
J. L. P.
, and
Tusset
,
A. M.
, 2013
, “
A Note on Non-Linear Phenomena in a Non-Ideal Oscillator, With a Snap-Through Truss Absorber, Including Parameter Uncertainties
,” Proc. Inst. Mech. Eng., Part K
,
227
(1
), pp. 76
–86
.10.1177/146441931246295829.
Godoy
,
W. R. A.
, and
Trindade
,
M. A.
, 2014
, “
Design and Optimization of a Non-Linear Dynamic Vibration Absorber Based on Snap-Through Geometry
,” Proceedings of the Eighth National Congress of Mechanical Engineering
, Vol.
1
, Uberlândia, MG, Brazil, Aug. 10–15, Paper No. 0832.30.
Liu
,
Y.
,
Mojahed
,
A.
,
Bergman
,
L. A.
, and
Vakakis
,
A. F.
, 2019
, “
A New Way to Introduce Geometrically Nonlinear Stiffness and Damping With an Application to Vibration Suppression
,” Nonlinear Dyn.
,
96
(3
), pp. 1819
–1845
.10.1007/s11071-019-04886-x31.
Bartel
,
D. L.
, and
Krauter
,
A. I.
, 1971
, “
Time Domain Optimization of a Vibration Absorber
,” ASME J. Eng. Ind.
,
93
(3
), pp. 799
–803
.10.1115/1.342801632.
Kwak
,
B. M.
,
Arora
,
J. S.
, and
Haug
,
E. J.
, 1975
, “
Optimum Design of Damped Vibration Absorbers Over a Finite Frequency Range
,” AIAA J.
,
13
(4
), pp. 540
–542
.10.2514/3.4975433.
Soom
,
A.
, and
Lee
,
M.-S.
, 1983
, “
Optimal Design of Linear and Nonlinear Vibration Absorbers for Damped Systems
,” ASME J. Vib., Acoust., Stress, Reliab. Des.
,
105
(1
), pp. 112
–119
.10.1115/1.326905434.
Kitis
,
L.
,
Wang
,
B.
, and
Pilkey
,
W.
, 1983
, “
Vibration Reduction Over a Frequency Range
,” J. Sound Vib.
,
89
(4
), pp. 559
–569
.10.1016/0022-460X(83)90357-735.
Jordanov
,
I.
, and
Cheshankov
,
B.
, 1988
, “
Optimal Design of Linear and Non-Linear Dynamic Vibration Absorbers
,” J. Sound Vib.
,
123
(1
), pp. 157
–170
.10.1016/S0022-460X(88)80085-336.
Rade
,
D. A.
, and
Steffen
,
V.
, 2000
, “
Optimisation of Dynamic Vibration Absorbers Over a Frequency Band
,” Mech. Syst. Signal Process.
,
14
(5
), pp. 679
–690
.10.1006/mssp.2000.131937.
Xue
,
S. D.
,
Ko
,
J. M.
, and
Xu
,
Y. L.
, 2002
, “
Optimal Performance of the TLCD in Structural Pitching Vibration Control
,” J. Vib. Control
,
8
(5
), pp. 619
–642
.10.1177/107754602928738.
Viana
,
F. A. C.
,
Kotinda
,
G. I.
,
Rade
,
D. A.
, and
Steffen
,
V.
, 2008
, “
Tuning Dynamic Vibration Absorbers by Using Ant Colony Optimization
,” Comput. Struct.
,
86
(13–14
), pp. 1539
–1549
.10.1016/j.compstruc.2007.05.00939.
Saravanamurugan
,
S.
,
Alwarsamy
,
T.
, and
Devarajan
,
K.
, 2015
, “
Optimization of Damped Dynamic Vibration Absorber to Control Chatter in Metal Cutting Process
,” J. Vib. Control
,
21
(5
), pp. 949
–958
.10.1177/107754631349255440.
Hartog
,
D.
, and
P
,
J.
, 1956
, Mechanical Vibrations
, 4th ed.,
McGraw-Hill
,
New York
.41.
Nayfeh
,
A. H.
, and
Mook
,
D. T.
, 1995
, Nonlinear Oscillations
,
Wiley-VCH
, Weinheim, Germany.Copyright © 2020 by ASME
You do not currently have access to this content.
