... of parameters using a global sensitivity analysis method known as Sobol' indices. The stress was calculated by performing finite element simulations of three-dimensional fluid-structure interaction models, while the sensitivity indices were computed using a Monte Carlo scheme. The results indicate that cap...

...Jonathan F. Wenk; Panayiotis Papadopoulos; Tarek I. Zohdi Most finite element models of atherosclerotic arteries do not account for the heterogeneity of the plaque constituents at the microscale. Failure of plaque lesions has been shown to be a local event, linked to stress concentrations caused...

... cups. Two finite element models are developed, considering either the acetabular component rigidly fixed or attached to the deformable bone. Results present 28% and 42% difference on the contact pressure for a polyethylene cup without metal-backing when the support conditions are changed, for the 28 mm...

... transfer (FDBT) seems to be the best surgical alternative, but it is a recent technique with still limited results. In this work, these three techniques have been analyzed by means of the finite-element method and a comparative analysis was done with the aim of extracting advantages and drawbacks...

..., the specific mechanisms that drive and regulate looping are not yet completely understood. Here, we present new experimental data and finite element models to help define these mechanisms for the torsional component of c-looping. First, with regions of growth and contraction specified according to experiments...

...E. Mazza; O. Papes; M. B. Rubin; S. R. Bodner; N. S. Binur A three-dimensional finite element program is described which attempts to simulate the nonlinear mechanical behavior of an aging human face with specific reference to progressive gravimetric soft tissue descent. A cross section...

... to particulate wear debris. Many computational studies have considered the potential for the former, although only few have attempted to tackle the latter. Using finite-element analysis an investigation, taking into account contact pressures as well as glenohumeral kinematics, has thus been conducted, to assess...

... of interest using magnetic resonance tagging. A nonlinear, three-dimensional, finite element model is used to predict these measurements at several suction pressures. Parameters defining the material properties of this model are optimized by comparing the measured and predicted myocardial deformations. We...