Toward developing a transducer for measuring in vivo tension in anterior cruciate ligament grafts in humans, the objectives of this study were to determine the following: (1) whether the calibration of a previously reported femoral fixation device transducer (FDT) (Ventura et al., 1998) is affected by the presence of the graft when implanted in the tibial metaphysis of an ovine model, (2) whether the FDT remains calibrated at 4 weeks postoperatively, and (3) whether the biological incorporation of the graft occurs prior to a change in the FDT calibration. The FDT was implanted in the hind limb of five sheep using an extra-articular procedure. Both the proximal common digital extensor tendon (i.e., graft) and a Teflon-coated wire were looped around the FDT inside a tunnel in the tibial metaphysis. The FDT was calibrated on three occasions using the loop of wire: once intraoperatively before graft insertion, once intraoperatively after graft insertion, and once postoperatively after the animals had been sacrificed at 4 weeks. Following sacrifice, the load transmitted to the FDT by the graft was also determined. The FDT exhibited linear calibration intraoperatively both before and after graft insertion with an average error relative to the calibration before insertion of the graft of −4.6 percent of full-scale load (150 N) and this average relative error was not significantly different from zero After 4 weeks of implantation, the average relative percent error was −5.0 percent and was not significantly different from zero indicating that the FDT remained calibrated in the in vivo environment. Because only 15 percent of the graft tension was transmitted to the FDT after 4 weeks, biological incorporation of the graft preceded the loss of calibration. In light of these findings, the FDT offers the capability of measuring the intra-articular ACL graft tension in vivo in animal models and possibly humans before the biological bond develops and also of monitoring the formation and maturation of the biological bond between a graft and bone tunnel.
Skip Nav Destination
Article navigation
August 2001
Technical Papers
In Vivo Calibration of a Femoral Fixation Device Transducer for Measuring Anterior Cruciate Ligament Graft Tension: A Study in an Ovine Model
Isaac Zacharias,
Isaac Zacharias
Department of Mechanical Engineering, University of California, Davis, CA 95616
Search for other works by this author on:
Stephen M. Howell,
Stephen M. Howell
Department of Mechanical Engineering, University of California, Davis, CA 95616
Search for other works by this author on:
M. L. Hull,
M. L. Hull
Department of Mechanical Engineering and Biomedical Engineering Program, University of California, Davis, CA 95616
Search for other works by this author on:
Keith W. Lawhorn
Keith W. Lawhorn
Department of Orthopedics, David Grant Medical Center, Travis Air Force Base, CA 90909
Search for other works by this author on:
Isaac Zacharias
Department of Mechanical Engineering, University of California, Davis, CA 95616
Stephen M. Howell
Department of Mechanical Engineering, University of California, Davis, CA 95616
M. L. Hull
Department of Mechanical Engineering and Biomedical Engineering Program, University of California, Davis, CA 95616
Keith W. Lawhorn
Department of Orthopedics, David Grant Medical Center, Travis Air Force Base, CA 90909
Contributed by the Bioengineering Division for publication in the JOURNAL OF BIOMECHANICAL ENGINEERING. Manuscript received by the Bioengineering Division March 7, 2000; revised manuscript received February 27, 2001. Associate Editor: R. Vanderby, Jr.
J Biomech Eng. Aug 2001, 123(4): 355-361 (7 pages)
Published Online: February 27, 2001
Article history
Received:
March 7, 2000
Revised:
February 27, 2001
Citation
Zacharias , I., Howell, S. M., Hull, M. L., and Lawhorn, K. W. (February 27, 2001). "In Vivo Calibration of a Femoral Fixation Device Transducer for Measuring Anterior Cruciate Ligament Graft Tension: A Study in an Ovine Model ." ASME. J Biomech Eng. August 2001; 123(4): 355–361. https://doi.org/10.1115/1.1385842
Download citation file:
Get Email Alerts
Simulating the Growth of TATA-Box Binding Protein-Associated Factor 15 Inclusions in Neuron Soma
J Biomech Eng (December 2024)
Effect of Structure and Wearing Modes on the Protective Performance of Industrial Safety Helmet
J Biomech Eng (December 2024)
Sex-Based Differences and Asymmetry in Hip Kinematics During Unilateral Extension From Deep Hip Flexion
J Biomech Eng (December 2024)
Related Articles
An Implantable Transducer for Measuring Tension in an Anterior Cruciate Ligament Graft
J Biomech Eng (June,1998)
Roentgen Stereophotogrammetric Analysis Methods for Determining Ten Causes of Lengthening of a Soft-Tissue Anterior Cruciate Ligament Graft Construct
J Biomech Eng (August,2008)
On Colles’ Fracture: An Experimental Study Involving Structural and Material Testing
J. Appl. Mech (May,2008)
Design Considerations for a Prosthetic Anterior Cruciate Ligament
J. Med. Devices (December,2012)
Related Proceedings Papers
Related Chapters
Analysis the Effect of IMU Calibration Errors on SINS/GPS Integration Accuracy for Airborne Earth Observation
International Symposium on Information Engineering and Electronic Commerce, 3rd (IEEC 2011)
4-Bit Pipeline ADC for Monolithic Active Pixel Sensors
International Conference on Advanced Computer Theory and Engineering (ICACTE 2009)
Computer Aided Oracle Bone Inscriptions Textual Research Based on Ontology
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3