Vertical tooth root fractures are diagnostically challenging, frustrating, and an increasingly common cause of failure of tooth restoration. These vertical root fractures have been associated with many causes, including the endodontic process itself. To investigate these endodontic causes, various phases of crown replacement for an anterior tooth were modeled using nonlinear, plane strain finite element (FE) analysis. Stresses developed during obturation, post positioning, crown placement, and masticatory and occlusal loading of the restored tooth were estimated using this analysis method. The minimum (compressive) principal stress was greatest during obturation of cones 1 and 2, and during mastication of the restored tooth. Although these stresses were significant (−150 to −280 MPa), they did not exceed the compressive strength of dentin. The maximum (tensile) principal stresses, 160 to 300 MPa, were also observed during obturation of cones 1 and 2. These peak stresses exceed the dentin tensile strength.

Issue Section:
Technical Papers
Topics:
Finite element analysis, Stress, Fracture (Materials), Fracture (Process), Compressive strength, Failure, Plane strain, Tensile strength
1.
Assif
D.
,
Oren
E.
, and
Marshak
B. L.
,
1989
, “
Photoelastic analysis of stress transfer by endodontically treated teeth to the supporting structure using different restorative techniques
,”
J. Prosthet. Dent.
, Vol.
61
, pp.
535
–
543
.
2.
Cailleteau
J. G.
,
Reiger
M. R.
, and
Akin
J. E.
,
1992
, “
A comparison of intracanal stresses in a post-restored tooth utilizing the finite element method
,”
J. Endodon.
, Vol.
18
, No.
11
, pp.
540
–
544
.
3.
Craig, R. G., O’Brien, W. J., and Powers, J. M., 1996, Dental Materials: Properties and Manipulation, C. V. Mosby, St. Louis, MO.
4.
Davy
D. T.
,
Dilley
G. L.
, and
Krejci
R. F.
,
1981
, “
Determination of stress patterns in root filled teeth incorporating various dowel designs
,”
J. Dent. Res.
, Vol.
60
, pp.
1301
–
1310
.
5.
Farah
J. W.
,
Craig
R. G.
, and
Sikarskie
D. L.
,
1973
, “
Photoelastic and finite element stress analysis of a restored axisymmetric first molar
,”
J. Biomech.
, Vol.
6
, pp.
511
–
520
.
6.
Friedman
C. E.
,
Sandrik
J. L.
,
Heuer
M. A.
, and
Rapp
G. W.
,
1977
, “
Composition and physical properties of gutta percha endodontic filling materials
,”
J. Endodon.
, Vol.
3
, No.
8
, pp.
304
–
308
.
7.
Gimlin
D. R.
,
Parr
C. H.
, and
Aguirre-Ramirez
G.
,
1986
, “
A comparison of stresses produced during lateral and vertical condensation using engineering models
,”
J. Endodon.
, Vol.
12
, No.
6
, pp.
235
–
240
.
8.
Grossman, L. I., Oliet, S., and Del Rio, C. E., 1988, Endodontic Practice, Lea & Febiger, Philadelphia, PA.
9.
Harvey
T. E.
,
White
J. T.
, and
Leeb
I. J.
,
1981
, “
Lateral condensation stress in root canals
,”
J. Endodon.
, Vol.
7
, No.
4
, pp.
151
–
155
.
10.
Hermann, L. R., and Toms, R. M., 1964, “A reformulation of the elastic field equation, in terms of displacements, valid for all admissible values of Poisson’s ratio,” ASME Trans., Mar., pp. 140–141.
11.
Holcomb
J. Q.
,
Pitts
D. L.
, and
Nicholls
J. I.
,
1987
, “
Further investigation of spreader loads required to cause vertical root fracture during lateral condensation
,”
J. Endodon.
, Vol.
13
, No.
6
, pp.
277
–
284
.
12.
Meister
F.
,
Lommel
T. J.
, and
Gerstein
H.
,
1980
, “
Diagnosis and possible causes of vertical root fractures
,”
Oral Surg.
, Vol.
49
, No.
3
, pp.
243
–
253
.
13.
Okeson, J. P., 1989, Management of Temporomandibular Disorders and Occlusion, C. V. Moseby, St. Louis, MO.
14.
Pitts
D. L.
,
Matheny
H. E.
, and
Nicholls
J. I.
,
1983
, “
An in vitro study of spreader loads required to cause vertical root fracture during lateral condensation
,”
J. Endodon.
, Vol.
9
, No.
12
, pp.
544
–
550
.
15.
Pitts
D. L.
, and
Natkin
E.
,
1983
, “
Diagnosis and treatment of vertical root fractures
,”
J. Endodon.
, Vol.
9
, No.
8
, pp.
338
–
346
.
16.
Reinhardt
R. A.
,
Krejci
R. F.
,
Pao
Y. C.
, and
Stannard
J. G.
,
1983
, “
Dentin stresses in post-reconstructed teeth with diminishing bone support
,”
J. Dent. Res.
, Vol.
62
, No.
9
, pp.
1002
–
1008
.
17.
Rubin
C.
,
Krishnamurthy
N.
,
Capiluoto
E.
, and
Yi
H.
,
1983
, “
Stress analysis of the human tooth using a three-dimensional finite element model
,”
J. Dent. Res.
, Vol.
62
, No.
2
, pp.
82
–
86
.
18.
Schilder
H.
,
Goodman
A.
, and
Aldrich
W.
,
1974
, “
The thermomechanical properties of gutta percha
,”
Oral Surg.
, Vol.
37
, No.
6
, pp.
946
–
953
.
19.
Standlee
J. P.
,
Caputo
A. A.
,
Collard
E. W.
, and
Pollack
M. H.
,
1972
, “
Analysis of stress distribution of endodontic posts
,”
Oral Surg.
, Vol.
33
, pp.
952
–
960
.
20.
Telli
C.
,
Gulkan
P.
, and
Gunel
H.
,
1994
, “
A critical reevaluation of stresses generated during vertical and lateral condensation of gutta percha in the root canal
,”
Endod. Dent. Traumatol.
, Vol.
10
, pp.
1
–
10
.
21.
Thresher
R. W.
, and
Saito
G. E.
,
1973
, “
The stress analysis of human teeth
,”
J. Biomech.
, Vol.
6
, pp.
443
–
449
.
22.
Weine, F. S., 1989, Endodontic Therapy, C. V. Mosby Company, St. Louis, MO.
23.
Williams
K. R.
, and
Edmundson
J. T.
,
1984
, “
A finite element stress analysis of an endodontically restored tooth
,”
Engineering in Medicine
, Vol.
13
, No.
4
, pp.
167
–
173
.
This content is only available via PDF.
Copyright © 1999
 by The American Society of Mechanical Engineers
You do not currently have access to this content.