The erosion and wear in the gun barrel will get worse with an increase in the number of projectiles fired. Generally speaking, the ballistic performance of the gun, measured through indicators such as the maximum pressure and the muzzle velocity , will decrease gradually due to gun barrel erosion. However, the above analysis does not agree with the firing test data of certain types of guns, especially of some small-caliber guns. The ballistic performance of such guns will exhibit an increase to their peak values followed by a gradual decrease with the number of rounds fired. This is the so-called interior ballistic peak phenomenon, also named as the hump effect. Taking several kinds of guns as examples, such as a 76 mm gun and a 100 mm gun, we calculated the engraving pressure of the guns by an approximate method and built a lumped-parameter interior ballistic model of the guns that exhibits the effect, according to the interior ballistics theory of guns with erosion and wear. The results of the modeling of the guns under different wear conditions are close to the test data, showing the existence of the peak values of and . The simulation results of some of the other guns that exhibit this phenomenon also show good agreement. Furthermore, it can explain the double-peak phenomenon for some types of guns with double driving bands. It was proven that the mismatch of the structure and the dimensions of the gun bore with those of the projectile driving band is the fundamental cause of this effect. Due to the mismatch, the engraving pressure will first increase and then decrease with the enlargement of the bore dimensions caused by barrel erosion and wear. The variation in the engraving pressure will inevitably lead to the variation in interior ballistic performance in the life cycle of the gun. This observed process appears to explain the interior ballistic peak phenomenon.
Skip Nav Destination
e-mail: tao_tcl@hotmail.com
Article navigation
September 2010
Research Papers
Mechanism of Interior Ballistic Peak Phenomenon of Guns and Its Effects
Chenli Tao,
Chenli Tao
State Key Laboratory for Manufacturing Systems Engineering,
e-mail: tao_tcl@hotmail.com
Xi’an Jiaotong University
, Xi’an, Shaanxi 710049, China; Shijiazhuang Mechanical Engineering College
, Shijiazhuang, Hebei 050003, China
Search for other works by this author on:
Yurong Zhang,
Yurong Zhang
Shijiazhuang Mechanical Engineering College
, Shijiazhuang, Hebei 050003, China
Search for other works by this author on:
Sanqun Li,
Sanqun Li
Shijiazhuang Mechanical Engineering College
, Shijiazhuang, Hebei 050003, China; School of Mechatronics Engineering, Beijing Institute of Technology
, Beijing 100081, China
Search for other works by this author on:
Changzhi Jia,
Changzhi Jia
Shijiazhuang Mechanical Engineering College
, Shijiazhuang, Hebei 050003, China
Search for other works by this author on:
Yongjian Li,
Yongjian Li
Shijiazhuang Mechanical Engineering College
, Shijiazhuang, Hebei 050003, China
Search for other works by this author on:
Xifa Zhang,
Xifa Zhang
Shijiazhuang Mechanical Engineering College
, Shijiazhuang, Hebei 050003, China
Search for other works by this author on:
Zhengjia He
Zhengjia He
State Key Laboratory for Manufacturing Systems Engineering,
Xi’an Jiaotong University
, Xi’an, Shaanxi 710049, China
Search for other works by this author on:
Chenli Tao
State Key Laboratory for Manufacturing Systems Engineering,
Xi’an Jiaotong University
, Xi’an, Shaanxi 710049, China; Shijiazhuang Mechanical Engineering College
, Shijiazhuang, Hebei 050003, Chinae-mail: tao_tcl@hotmail.com
Yurong Zhang
Shijiazhuang Mechanical Engineering College
, Shijiazhuang, Hebei 050003, China
Sanqun Li
Shijiazhuang Mechanical Engineering College
, Shijiazhuang, Hebei 050003, China; School of Mechatronics Engineering, Beijing Institute of Technology
, Beijing 100081, China
Changzhi Jia
Shijiazhuang Mechanical Engineering College
, Shijiazhuang, Hebei 050003, China
Yongjian Li
Shijiazhuang Mechanical Engineering College
, Shijiazhuang, Hebei 050003, China
Xifa Zhang
Shijiazhuang Mechanical Engineering College
, Shijiazhuang, Hebei 050003, China
Zhengjia He
State Key Laboratory for Manufacturing Systems Engineering,
Xi’an Jiaotong University
, Xi’an, Shaanxi 710049, ChinaJ. Appl. Mech. Sep 2010, 77(5): 051405 (5 pages)
Published Online: June 9, 2010
Article history
Received:
July 31, 2009
Revised:
January 29, 2010
Posted:
April 12, 2010
Published:
June 9, 2010
Online:
June 9, 2010
Citation
Tao, C., Zhang, Y., Li, S., Jia, C., Li, Y., Zhang, X., and He, Z. (June 9, 2010). "Mechanism of Interior Ballistic Peak Phenomenon of Guns and Its Effects." ASME. J. Appl. Mech. September 2010; 77(5): 051405. https://doi.org/10.1115/1.4001561
Download citation file:
Get Email Alerts
Modeling the Dynamic Response of a Light-Driven Liquid Crystal Elastomer Fiber/Baffle/Spring-Coupled System
J. Appl. Mech (December 2024)
Why Biological Cells Cannot Stay Spherical?
J. Appl. Mech (December 2024)
Programmable Supratransmission in a Mechanical Chain with Tristable Oscillators
J. Appl. Mech (December 2024)
Adhesion of a Rigid Sphere to a Freestanding Elastic Membrane With Pre-Tension
J. Appl. Mech (December 2024)
Related Articles
Projectile Driving Band Interactions With Gun Barrels
J. Pressure Vessel Technol (May,2006)
Statistical Comparisons Between Qualification Tests for Gun-Fired Projectiles
J. Appl. Mech (September,2010)
The Conception of the Segmented Kinetic Energy Penetrators for Tank Guns
J. Appl. Mech (September,2010)
Experimental Study and Numerical Simulation of Propellant Ignition and Combustion for Cased Telescoped Ammunition in Chamber
J. Appl. Mech (September,2010)
Related Proceedings Papers
Related Chapters
Surface Analysis and Tools
Tribology of Mechanical Systems: A Guide to Present and Future Technologies
Cavitation Induction by Projectile Impacting on a Water Jet
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Optimal Shape Design Approach and Influence on the Projectile Vertices with Respect to Some Objective Function
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3